P5E WS Professional - nenabehne system...

[Shit z PCT]

...z casti to davam za vinu novemu biosu, na predchozi verzi (0404) to fungovalo......

Flashnout z5, nebo zkus jiný BIOS.

[Dade]

Flashnout z5, nebo zkus jiný BIOS.

flashnout z5 jsem se vcera pokousel celej vecer... ale pise mi to ze je jina EEPROM a ze je bios "too old".... takze to nejde.. nebo uz nevim jak a novejsi nez mam neni

[AjsTi]

Co skusit pouzit prepinac /py ?


/cc = clear CMOS after Programming
/cd = clear DMI after Programming
/cp = clear PNP(ESCD) after Programming
/py = Program Flash Memory
/sy = save the old BIOS to: "OLDBIOS.BIN"
/cks = show Update Binfile Checksum
/R = Reset System after Programming

[Dade]

Co skusit pouzit prepinac /py ?


/cc = clear CMOS after Programming
/cd = clear DMI after Programming
/cp = clear PNP(ESCD) after Programming
/py = Program Flash Memory
/sy = save the old BIOS to: "OLDBIOS.BIN"
/cks = show Update Binfile Checksum
/R = Reset System after Programming

no, pokud to pujde.... jak presne by teda mel vypadat prikaz pro prepsani biosu starsi verzi? nerea bych to podelal....

[AjsTi]

"A:\>awdflash.exe bios.bin /cc /cd /cp /py /sy /cks /R" samozrejme pouzijes len jeden z tych prepinacov.

[Dade]

"A:\>awdflash.exe bios.bin /cc /cd /cp /py /sy /cks /R" samozrejme pouzijes len jeden z tych prepinacov.

aha, malickost.... je tam AMIBIOS

[AjsTi]

A co toto ? http://www.biosman.com/biosrecovery.html - zdroj http://www.biosman.com/bios-flash.html

EDIT:A este >
Recommended AMI flash procedures:

amiflash <name of .rom file> /a /b /c

NOTE: the spaces between the /a /b /c are extremely important. Also, programming the bootblock will dis- allow you to use the AMI recovery method. However not using this particular switch seems to cause the BIOS not to update fully. Your choice.. catch 22.

a= autoboot
b= program bootblock
c= clear CMOS