SpeedFan 4.2x

[rombo]

Neví někdo, proč mi to na Gigabitech DS4 ani DQ6 už zase neukazuje teplotu CORE?

me to normalne jde, ikdyz verze 4.31 se chovala nejak divne a neukazovala mi jednotlivy jadra.. ted u 4.32 je to v poradku az na ty otacky ventilatoru.. 13500000 rpm fakt nema .. stejne tak otacky systemaku jsou uplne mimo

[herma]

Nevím jestli je problém s Vistama nebo Biosem nebo verzí programu, ale otáčky ventilátorů ukazuje v milionech, disky SMART nedetekuje... tak se to snad s další verzí napraví.

jde o verzi 4.32

[quab]

Dá se nějak nastavit, aby program zobrazoval vytížení CPU v tray?

[Austin]

Finally, the long awaited SpeedFan 4.33 Final is online. It includes a lot of fixes and optimizations and supports really a lot of new hardware and configurations. Fan speed readings for all of you ITE IT871xF owners work perfectly now. xAP support is restored on program start. ATI SB600, Intel ICH9 and nVidia MCP55 SMBus are fully supported and devices are discovered through them. The F1 key (for the context sensitive help) works on Vista too. Winbond W83627EHF (and similar) owners can now enter CONFIGURE / ADVANCED and configure several new PWM settings (use with care...). I moved to a new server. Everything should be ok with it. Email me if there is anything odd with the site.

[rombo]

muzu potvrdit.. konecne mi nova verze 4.33 ukazuje korektne otacky vetraku na procesoru

[daggy]

muzu potvrdit.. konecne mi nova verze 4.33 ukazuje korektne otacky vetraku na procesoru

To mas pravdu, ale mne teraz neukazuje SMART SATA II diskov vo Viste. V XP som ho neskusal.

[Ssnake]

muzu potvrdit.. konecne mi nova verze 4.33 ukazuje korektne otacky vetraku na procesoru

me verze 4.33 ukazuje napeti +12V jen 0.9xV, a teploty nejak divne - s boxem 30/60 (+-) a se zalmanem 9700 taky tak (box byl vlazny a zalman je studeny...)
otacky vetraku mi menit nejdou vubec (ale ukazuji asi spravne)

//GB p35-ds3r + 2160@3Ghz

[GreenOrchid]

omlouvam se, ale muze mi nekdo rici, zda umi cist speedfan 4.33 i teplotu na jadrech CPU ? asi ne , ze ?

[rombo]

omlouvam se, ale muze mi nekdo rici, zda umi cist speedfan 4.33 i teplotu na jadrech CPU ? asi ne , ze ?

umi i jednotliva jadra ale stejne to zmeri spatne

[Ssnake]

umi i jednotliva jadra ale stejne to zmeri spatne

spatne? to se mi nezda.
tak cim teda merit?

[rombo]

spatne? to se mi nezda.
tak cim teda merit?

ve SpeedFanu mam Core 0: 25°C a Core 1: 24°C

v CoreTempu mam Core 0: 39°C a Core 1: 40°C coz je podstatnej rozdil, verim CoreTempu

[GreenOrchid]

kdyz pominu jadra, tak mi to ukazuje vcelku dobre.
speedfan 4.33
CPU 32
MB 41

Bios
CPU 33
MB 40

takze spokojenost

[Darth Maul]

Bohužel, Speedfan si s procesory řady E8x00 neporadí a nový je v nedohlednu...

[Ssnake]

ve SpeedFanu mam Core 0: 25°C a Core 1: 24°C

v CoreTempu mam Core 0: 39°C a Core 1: 40°C coz je podstatnej rozdil, verim CoreTempu

speedfan 4.33 : 31/31
coretemp 09091 : 31/31
coretemp 096 : 46/46

pri burnu :

speedfan 4.33 : 52/52
coretemp 09091 : 52/52
coretemp 096 : 67/67

chladic je studeny....

[palara]

Me SpeedFan fungoval pokazde kdy se v BIOSU vypnuly funce, ktere ovladaji regulace ventilatoru. Fungovaly prevazne jen 2 fany (nejspis jen ty, ktere dokaze ovladat funce BIOSu. Alespon ASUS

Ted jsem zkousel u desky ASUS P5WD2 E-PREMIUM - nejdou regulovat u CPU fan otacky s 3-pinovym konektorem (se 4 pin to jde). 3-pin funguje na CHAfan1.

Celkem Me to stve


Na starsi desce, tez ASUS (jen byla AMD) byl taky 4-pin u CPU fanu ale fungoval i na 3-pinu (Thermaltake BigTyp 120VX)

[M@to]

Nova verzia SpeedFan 4.34.

- added full support for SiS964 SMBus
- added full support for SiS966 SMBus
- added full support for ULi M1575 SMBus
- added full support for VIA VT8237S SMBus
- added full support for VIA VT8251 SMBus
- added full support for nVidia MCP61 SMBus
- added full support to read internal temperatures on AMD K10 processors
- added native nVidia video card (up to, but excluding 8xxx) internal temperature reporting
- added full support for SMSC SCH5307
- added full support for F8000 temperatures and fan speeds
- added full support for SMSC EMCT03
- added full support for WINBOND W83793G, including ADVANCED options
- added support for Fintek F71782F hardware monitor at unusual addresses
- added support for Winbond W83627DHG at unusual addresses
- added support for ITE IT8726F hardware monitor at unusual addresses
- added support for a new stepping of the Andigilog aSC7621
- Winbond W83791D properly handles higher fan divisors for fan1, fan2 and fan3 and shows fan4 and fan5 too
- added SMSC LPC47M192 FAN DIVISOR settings in CONFIGURE / ADVANCED
- added full PWM support to SMSC LPC47B397, including settings in CONFIGURE / ADVANCED
- CONFIGURE now allows to go as low as -60C when selecting the DESIRED and WARNING levels to let users of the RELATIVE Intel Core temperature reading properly configure SpeedFan
- improved DDR2 memory module size detection
- added preliminary DDR3 identification
- new icon by Bengt Strom
- fixed an issue where Intel Core temperatures on multi core systems reported the same temperature for all cores
- improved Tjunction detection for Intel CORE temperatures (you might no longer need the temperature offset in CONFIGURE / ADVANCED)
- fixed crash on several DFI motherboards
- fixed the detection of older revisions of the ITE IT8705F
- restored the correct clock speed after resume from hibernation
- rewritten the logic of the usage of a synchronizer in the thread that reads CPU usage (this will fix the SpeedFan not exiting issue)
- address $2E on DFI motherboards is no longer scanned if the motherboard model starts with LP. If you have one of these models and you know that there should be a valid chip at that address, send me a SEND REPORT (INFO tab) with some NOTES
- fixed ADT7475 temperature readings when in offset 64 mode
- fixed a bug when changing the type of data to be charted
- mails sent by SpeedFan now properly separate headers and the body with a blank line
- fixed an issue with SUN 2864 motherboard

[rombo]

konecne mi SpeedFan ukazuje korektne teploty jader shodne s CoreTempem .. konkretne ta 4.34

[meteor]

Zkoušeli jste někdo SMART v tom posledním SpeedFanu? Se mi zdá, že se mi nějak výrazně (tak o 8 až 10%) zlepšil výsledek mojeho starého 200GB Maxtora DM10
Nepozorovali jste něco podobného?

[Darth Maul]

Zkoušeli jste někdo SMART v tom posledním SpeedFanu? Se mi zdá, že se mi nějak výrazně (tak o 8 až 10%) zlepšil výsledek mojeho starého 200GB Maxtora DM10
Nepozorovali jste něco podobného?

Zkoušel jsem teď zrovna disk, který prodávám, a rozdíl mezi 4.33 a 4.34 není naprosto žádný...

[meteor]

Zkoušel jsem teď zrovna disk, který prodávám, a rozdíl mezi 4.33 a 4.34 není naprosto žádný...

No jo, ale ty neprodáváš žádného staříčka
U mých dvou zbývajících (Samsung 500GB a WD Raptor 74GB) jsou výsledky úplně stejné... ale co, možná je to jenom haluz. Třeba ještě někdo přispěje, heh.

[rombo]

No jo, ale ty neprodáváš žádného staříčka
U mých dvou zbývajících (Samsung 500GB a WD Raptor 74GB) jsou výsledky úplně stejné... ale co, možná je to jenom haluz. Třeba ještě někdo přispěje, heh.

tak ja mam na Samsungu 400GB taky uplne stejny teploty.. takze to mozna byla jenom haluz

[AjsTi]

Download

 - released to the public the EXOTICS tab 
 - fixed 120 DPI issue in CONFIGURE dialog 
 - added full support for Areca RAID controllers 
 - greatly improved SCSI support 
 - added support for Abit uGuru 3 (uGuru 2005) 
 - added full support for Intel FB-DIMM temperature readings 
 - added full support for ITE IT8720F 
 - added full support for Andigilog aSC7611 
 - added full support for LM96000 (it was previously detected as LM85B) 
 - added full support for Analog Devices ADT7490 
 - added full support for SMSC SCH5327 
 - fixed Windbond W83766HG hardware monitor detection on some Asus motherboards 
 - improved CPU identification routines 
 - added support for a new revision of the WINBOND W83637HF 
 - added support for WINBOND W83637HF at unusual addresses 
 - added support for Asus F8000 at unusual addresses 
 - added identification of the SMSC SCH5514 
 - added identification of SMSC EMC2300 
 - added ITE IT8718F fifth fan speed reporting 
 - added identification of Analog Devices ADP3228 
 - added identification of ITE IT8512F 
 - added identification of Winbond W83667HG SuperIO chip 
 - identified a new revision of Fintek F71872 hardware monitor subsystem 
 - added preliminary detection of the HECI driver 
 - fixed a bug in SMSC LPC47M172 support code that prevented fan speeds to be properly reported 
 - 45nm Intel CPUs with CPUID=0x10676 now use a Tjmax value of either 105C or 90C 
 - added full support for nVidia MCP65 SMBus 
 - added full support for nVidia MCP67 SMBus 
 - added full support for nVidia MCP73 SMBus 
 - added full support for nVidia MCP78S SMBus 
 - added full support for VIA CX700M SMBus 
 - added full support for Intel 82801JIB SMBus 
 - fixed an issue where the Intel SMBus couldn't be accessed and messages like SMBus msg : SMB Error $14 : FAILED (50) were generated 
 - enabled Intel ICH8M-E SMBus device, if needed 
 - enabled 631xESB SMBus, if needed 
 - enabled SMBus on Intel ICH9R, if needed 
 - preliminary detection of AMD CD5536 SMBus 
 - some SMBus addresses on Asus Striker Extreme are no longer scanned 
 - SMBus is no longer scanned at address $2E on DELL XPS710 
 - Tyan S2927 second SMBus is no longer scanned 
 - some addresses on the SMBus of Asus P5NT WS are no longer scanned 
 - some addresses on the SMBus of the Intel DX38BT are no longer scanned 
 - some SMBus addresses are no longer scanned on Asus M2N32-SLI DELUXE 
 - the second nForce SMBus is no longer scanned on FIC AU31 
 - some addresses on the SMBus of Supermicro H8DCE are no longer scanned 
 - added some SMBus scan exclusions for Intel D5400XS 
 - added /NOGIVEIO command line parameter to disable access to giveio.sys 
 - added /NOGEFORCEROM command line switch that will prevent SpeedFan from reading nVidia GeForce ROMs (useful if it takes too much time) 
 - nVidia video BIOS is now stored in a file for later retrieval 
 - fixed an access violation under Win9x with some nVidia video cards 
 - battery status messages are no longer displayed 
 - upon resume, all controlled fans are set to 100% for half a second, then set to their minimum fan speed 
 - added new configuration option SHOWSTATICICON 
 - enabled Intel 6300ESB SMBus if needed

[M@to]

Download

- greatly improved temperature reporting for almost all nVidia video cards
- now fan speeds are lowered more aggressively
- added support for AMD K11 temperature sensor
- added full support for SMSC EMC6W201
- added full support for SMSC SCH5127
- added support for SMSC EMC2710P fan speed readings
- ARECA RAID support updated to Build 270
- added AMCC/3ware test code
- improved IT8720F identification
- fixed F1 context sensitive help key support
- better identification of DIRECT RAMBUS modules
- enabled Intel ICH8 SMBus, if needed
- identified SMSC SCH5317
- some addresses on the Asus P5N32-E SLI are no longer scanned
- some addresses on the Asus Rampage Formula are no longer scanned
- some addresses on EVGA NFORCE 680i LT SLI are no longer scanned

[Firuz]

Asi jste nikdo nezjistil, jak Speedfan nastavit, aby se po spuštění automaticky načetly nastavené manuální hodnoty otáček větráku, že? Tato věc mi v něm dost chybí

[M@to]

Download

- fixed a bug where, after resuming from suspend, fan speeds were not really changed
- added full support for AMD CD5536 SMBus
- added identification of Fintek F75111R
- fixed an Exotics tab Access Violation
- fixed a bug that caused all of the EVENTS to be lost after entering CONFIGURE