SpeedFan 4.2x

[GreenOrchid]

omlouvam se, ale muze mi nekdo rici, zda umi cist speedfan 4.33 i teplotu na jadrech CPU ? asi ne , ze ?

[rombo]

omlouvam se, ale muze mi nekdo rici, zda umi cist speedfan 4.33 i teplotu na jadrech CPU ? asi ne , ze ?

umi i jednotliva jadra ale stejne to zmeri spatne

[Ssnake]

umi i jednotliva jadra ale stejne to zmeri spatne

spatne? to se mi nezda.
tak cim teda merit?

[rombo]

spatne? to se mi nezda.
tak cim teda merit?

ve SpeedFanu mam Core 0: 25°C a Core 1: 24°C

v CoreTempu mam Core 0: 39°C a Core 1: 40°C coz je podstatnej rozdil, verim CoreTempu

[GreenOrchid]

kdyz pominu jadra, tak mi to ukazuje vcelku dobre.
speedfan 4.33
CPU 32
MB 41

Bios
CPU 33
MB 40

takze spokojenost

[Darth Maul]

Bohužel, Speedfan si s procesory řady E8x00 neporadí a nový je v nedohlednu...

[Ssnake]

ve SpeedFanu mam Core 0: 25°C a Core 1: 24°C

v CoreTempu mam Core 0: 39°C a Core 1: 40°C coz je podstatnej rozdil, verim CoreTempu

speedfan 4.33 : 31/31
coretemp 09091 : 31/31
coretemp 096 : 46/46

pri burnu :

speedfan 4.33 : 52/52
coretemp 09091 : 52/52
coretemp 096 : 67/67

chladic je studeny....

[palara]

Me SpeedFan fungoval pokazde kdy se v BIOSU vypnuly funce, ktere ovladaji regulace ventilatoru. Fungovaly prevazne jen 2 fany (nejspis jen ty, ktere dokaze ovladat funce BIOSu. Alespon ASUS

Ted jsem zkousel u desky ASUS P5WD2 E-PREMIUM - nejdou regulovat u CPU fan otacky s 3-pinovym konektorem (se 4 pin to jde). 3-pin funguje na CHAfan1.

Celkem Me to stve


Na starsi desce, tez ASUS (jen byla AMD) byl taky 4-pin u CPU fanu ale fungoval i na 3-pinu (Thermaltake BigTyp 120VX)

[M@to]

Nova verzia SpeedFan 4.34.

- added full support for SiS964 SMBus
- added full support for SiS966 SMBus
- added full support for ULi M1575 SMBus
- added full support for VIA VT8237S SMBus
- added full support for VIA VT8251 SMBus
- added full support for nVidia MCP61 SMBus
- added full support to read internal temperatures on AMD K10 processors
- added native nVidia video card (up to, but excluding 8xxx) internal temperature reporting
- added full support for SMSC SCH5307
- added full support for F8000 temperatures and fan speeds
- added full support for SMSC EMCT03
- added full support for WINBOND W83793G, including ADVANCED options
- added support for Fintek F71782F hardware monitor at unusual addresses
- added support for Winbond W83627DHG at unusual addresses
- added support for ITE IT8726F hardware monitor at unusual addresses
- added support for a new stepping of the Andigilog aSC7621
- Winbond W83791D properly handles higher fan divisors for fan1, fan2 and fan3 and shows fan4 and fan5 too
- added SMSC LPC47M192 FAN DIVISOR settings in CONFIGURE / ADVANCED
- added full PWM support to SMSC LPC47B397, including settings in CONFIGURE / ADVANCED
- CONFIGURE now allows to go as low as -60C when selecting the DESIRED and WARNING levels to let users of the RELATIVE Intel Core temperature reading properly configure SpeedFan
- improved DDR2 memory module size detection
- added preliminary DDR3 identification
- new icon by Bengt Strom
- fixed an issue where Intel Core temperatures on multi core systems reported the same temperature for all cores
- improved Tjunction detection for Intel CORE temperatures (you might no longer need the temperature offset in CONFIGURE / ADVANCED)
- fixed crash on several DFI motherboards
- fixed the detection of older revisions of the ITE IT8705F
- restored the correct clock speed after resume from hibernation
- rewritten the logic of the usage of a synchronizer in the thread that reads CPU usage (this will fix the SpeedFan not exiting issue)
- address $2E on DFI motherboards is no longer scanned if the motherboard model starts with LP. If you have one of these models and you know that there should be a valid chip at that address, send me a SEND REPORT (INFO tab) with some NOTES
- fixed ADT7475 temperature readings when in offset 64 mode
- fixed a bug when changing the type of data to be charted
- mails sent by SpeedFan now properly separate headers and the body with a blank line
- fixed an issue with SUN 2864 motherboard