ATI Tray Tool v.1.0.0.195 - 1.0.3.780 NEW

[Haste]

1.2.6.940

Je to tu !!!

Babelfish preklad Snad to z toho pochopite:

"Renovated the module of control Overdrive 3. Now you can advance any accessible frequencies to GPU and memory (above or lower than possible in THE CCC), and also advance voltage to GPU."

[Spajdr]

celá zpráva

1.2.6.940
[F] Fixed bug when manual fan control can not be applied[*] Updated some translation files
[F] Fixed Old I2C Method to be compatible with X1xxx boards in memory voltage control procedure
[+] Added ability to change how ATT will react on "ATI HotKey poller" service. (in General options)[*] Updated Overdrive control procedure. Now you can set any available clocks for OverDrive even beyond the Catalyst limits!
And change GPU Voltage too.
[+] Added option to apply OverDrive settings on startup
[+] Added Portuguese (Brazilian) and Belorussian translations
________
Can be downloaded from Guru3d (when will be updated) or by checking for new version in General options in ATI Tray Tools.

[Spajdr]

Ray jede

News about next release
At this moment I'm finishing adding new method of overclocking for R5xx boards. This method will be called "Driver Level".
What will do this method:
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not resets by that service in 3D games
5. With this method clocks will not resets when you play any video files (checked on my 1800XT, no more resets)
6. More stable overclocking. Catalyst know HOW to do overclock job better that any other utils
________
I hope this method will work without problems, but there are some disadvantages:
1. It seems that this method can be used only on video boards with Overdrive support (I will check it with non Overdrive board 1600Pro)
2. The step in MHz will be higher than in Low Level ( about 6MHz)

[Spajdr]

celkem zajímavé reakce od Unwindera a Wizzard na práci Raye
http://www.rage3d.com/board/showthread.php?t=33868890

[AXB]

celkem zajímavé reakce od Unwindera a Wizzard na práci Raye
http://www.rage3d.com/board/showthread.php?t=33868890

No teda jestli je to pravda, tak to celkem mení můj názor na Mr. Adamse... ale ne na ATT.

[Haste]

Jediny problem, proc jeste pouzivam AT a ne ATT je ten, ze ma dost divne nastaveni voltazi u pameti. Mel by jeste dodelat moznost nastaveni vsech 3 voltazi na pameti a jeste aby se to nastaveni aplikovalo pri prepnuti do 3D. Pak jeste nejak obejit relaxovane casovani pameti, protoze to silene zpomaluje oproti AT (par tisic v AQM3) a pak by to bylo super )

[AXB]

ATI Tray Tools 1.2.6.955

[+] Added new overclocking method for X1xxx boards with Overdrive support. "Driver Level overclocking".
Near the same method first was introduced in RivaTuner and then in ATITool.
What will do this method?
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory. Only for hardware with voltage regulator
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not reset by that service in 3D games
5. With this method clocks shouldn't not resets when you play any video files (tested on my 1800XT)
6. More stable overclocking.
7. You can create full featured overclocking profiles in ATT and use them in game profiles.
8. For Video board without OverDrive support ATT will use alternative method for overclocking like used in ATI WinClk and also in last release of RivaTuner.
But this method has some disadvantages:
1. Big steps for clock regulators. For GPU about 6Mhz and about 9Mhz for Memory.
2. Not all voltages can be applied. Try not to set voltage less than 1.1000 and voltage can not be applied if video doesn't support voltage control.
[*] Improved Overdrive 3 support. Now ATT will calculate nearest possible clocks before applying.
[+] Added Japenese, Finnish translations
[+] Added option to include clocks in Overclocking Profile. Now you can create profile just for FAN or for Voltage control without GPU and Memory clocks. "C" means that profile has Clocks included.
[*] Updated user interface in some dialog windows.
[*] Updated "New AA & AF Methods" database. Added a lot of experimental options to improve antialiasing methods like SAAOM, EATM.

[pulec7]

No ja bych potreboval poradit s voltazi pameti. Me de nastavovat pouze jadro, kdyz zmenim vurent voltaze pameti tak to je dle me jen tak kdyz to jede ve 2d a jeste mi nejde prepsat po pouziti se mi vraci zpet na svoji hodnotu.

[Spajdr]

Myslím že ani sám Ray Adams neví co to všechno těch 13 AA módů dělá

[flash]

DOWNLOAD

Fixed procedure to display memory clocks as DDR in Overclocking Window.
Updated tray icon
Added hotkeys to switch monitor rotation between 0/90 and 0/270
Added Romanian translation
Updated existing translation files
Added Memory IO voltage control for X1xxx video boards.
Updated GUI interface for some dialog boxes
Updated core names database
Added 500ms delay before restoring previous 3D settings after exiting from game. If this included in game profile.
Updated text rendering procedure in FlashOSD module
Updated overclocking support for RV570 and RV560 boards. Thanks Unwinder for help and information.

[Nakadah Al Jaffa]

Tak sem si teda stahnul tu posledni verzi 964, ale nikde nemuzu najit polozky upravy napet nebo casovani pameti. Kolonka ATI ovedrive 3 je nefunkcni. Ze by to na x1650pro nefungovalo? Nak

[Hazo]

Tak sem si teda stahnul tu posledni verzi 964, ale nikde nemuzu najit polozky upravy napet nebo casovani pameti. Kolonka ATI ovedrive 3 je nefunkcni. Ze by to na x1650pro nefungovalo? Nak

ja to iste... zrejme je to tym, ze mame Omegy 6.9... dufam ze skoro vyjdu nove aj s plnou podporou r1650Pro.....

[Nakadah Al Jaffa]

ja to iste... zrejme je to tym, ze mame Omegy 6.9... dufam ze skoro vyjdu nove aj s plnou podporou r1650Pro.....

No prave...originalni catalysty instalovat nechci. Sem rad ze grafika ficela hned napoprve - s omegama. O potizich s catalysty uz sem neco slysel, tak se tomu hodlam vyhnout. Nak

[AjsTi]

Takze ray kupil HD 3870 a zacal pracovat na ATT pre tie rady kariet.
ATT beta with HD 3xxx (and may be 2xxx) support
Samozrejme pri tej prilezitosti, vydal nove ATT
Download
http://cid-a50350ea7a969f0c.skydrive...c/attsetup.exe
attsetup.exe
http://rapidshare.de/files/38791527/attsetup.exe.html


Fixed wrong FAN monitoring
Fixed bug with System Tray monitoring window
Disabled "Calculate" button in Overclocking window
- Some fixes in FAN control
- Implemented support for new AA modes and AA Filter modes

http://img159.imageshack.us/my.php?i...autofanfy0.jpg

[rombo]

Takze ray kupil HD 3870 a zacal pracovat na ATT pre tie rady kariet.
ATT beta with HD 3xxx (and may be 2xxx) support
Samozrejme pri tej prilezitosti, vydal nove ATT

parada, a ze jsme se nacekali co .. jdu to nahodit

[AjsTi]

parada, a ze jsme se nacekali co .. jdu to nahodit

JJ Male OT/Ray proste nemal prachy na novu grafiku a nemohol pokracovat vyvoj, tak sa pozbierali ludia z fora a kupil grafiku a obnovil svoj program /OT
Mimochodom monitorovanie otacok ide, alev tray sa mi sotva na sekundu zobrazi teplota a potom tam je len nula, ale ta bublina ked na to dam mysku ukazuje teplotu zhodnu co ukazuje rivatuner.

[rombo]

monitorovanie otacok ide, alev tray sa mi sotva na sekundu zobrazi teplota a potom tam je len nula, ale ta bublina ked na to dam mysku ukazuje teplotu zhodnu co ukazuje rivatuner.

bohuzel toto mi to dela taky

EDIT: a dokonce se ta teplota ani neaktualizuje, no zrovna funkcni ten ATT moc neni

[AjsTi]

bohuzel toto mi to dela taky

EDIT: a dokonce se ta teplota ani neaktualizuje, no zrovna funkcni ten ATT moc neni

Napisem Rayovi, cera som jaksi uz ani nemohol Zaujima to nielen teba ale i mna.

EDIT:Zrejme treba skusit poslednu betu. http://cid-a50350ea7a969f0c.skydrive...c/attsetup.exe 1.4.7.1111 , on ich tam teraz vydava ako na pase
Hold som v praci, najskor az doma

EDIT2: Monitoring v systray funguje ! Uz je verzia 1.4.7.1113.

[rombo]

Monitoring v systray funguje ! Uz je verzia 1.4.7.1113.

ano, potvrzuji ze funguje .. dokonce uz je verze 1.4.7.1115 kterou mam momentalne nainstalovanou

[AjsTi]

New beta uploaded (build 1114)
+ Added experimental button "Apply Fix" (in FAN tab of overclocking window) which should fix problems with auto fan control. Just click it ones and set auto mode. Then tell me how your Fan works

No staci spamu, pockam na full verziu O 1115 nepise co je nove a pocitam, ze do rana bude aspon 30 na konci
Inac toto sledovat

[Dusan]

Nevíte čím to může být ? Tento program jsem používal se svojí AGP ATI X8OOPRO , ale teď jsem si pořídil novou PCIe HD3850 a nechce mi spolupracovat. Zobrazuje úplně nějaké divné takty paměti i jádra a pokud chci přetaktovat tak mi to spadne. Používám ATI CATALYST 9.2.

[AjsTi]

Otazka je aku verziu programu pouzivas, istu dobu robi Ray len bety, ktore doraba na niektore novsie karty. Takze miesto starej full doporucujem si stiahnut betu. Ja mam HD3870 a takty funguju ako maju.

[jimmy]

treba zde...

http://majorgeeks.com/ATI_Tray_Tools_d4569.html