Catalyst a X700Pro

[sonic]

Nazdar,

Mam taky problemik. Od Catalyst 5.11 (vratane) mi ani jeden jediny driver nefungoval spravne. Catalysti 5.11 az 6.2 mi robili nasledovne: potom co som ich nainstaloval nasledoval restart. Ked nabehli windows tak zopar ikoniek mi zmizlo potom ako zbehli ati testy. Po dalsom restarte sa uz nedalo nastavit rozlisenie ine ako 640x480x16 farieb (nie bit). Aj ked v dropdowne mi ponukal vsetky standardy ale po vybere a po potvrdeni mi len preblikol obraz a rozlisenie zostalo rovnake.. 5.10 mi funguje celkom dobre.

V nadeji ze tento problem nebude v 6.6ke som si ich nainstaloval..s rozlisenim nebol problem. Akurat ze "SMART"GART mi vsetko vypol co sa nachadza na tej karte v control centri. 3D grafika vobec nefungovala, a ked som tahal okno tak mi to prekreslovalo snad aj pomalsie nez keby som nemal ziadne drivere.

Skusal som aj driveri Omega a pod. no nic nepomahalo. Vacsinou som mal aj VIA hyperion najnovsi. (akurat pri 6.6ke nie, zabudol som ich nahodit)

Stretli ste sa uz niekto s takymto pripadom?

[Anduril]

no tak kdyz s 6.6 ti to slo, ale bez akcelerace, tak to mozna bylo tim, ze jsi nemel nahozeny ten agp ovladace (soucast Hyperionu) ..
Mozna je to take nejaka nekompatibilita s deskou.

Pouzij program Driver Cleaner a odinstaluj pomoci nej VIA Hyperion a Catalysty. Po restartu nahod Hyperion a po restartu pak nove Catalysty..treba to pujde

[sonic]

tak nako som to planoval. skusim. vdaka, potom dam vediet ci sa podarilo.

[sonic]

tak som to vyskusal:

vyhodenie driverov s DC.
install hyperion 409A
install catalyst 6.7
(vsetko s medzi restartmy)
vysledok:

a) 1.nabehnutie systemu nic, reset pri windows logo.
b) 2.nabehnutie ok. az na to ze ziadna 3D, a myslim ze ani moc 2D ne, max tak 1,5D
c) xte reset systemu BSOD na windows logo na velmi kratku dobu a potom auto restart..

vratil som sa ku 5.10catalyst.

inak to ze mam len SP1 to by nemalo vadit ne? .Net mam 2.0..

[sonic]

Nepomohol ani novsi BIOS.

[sonic]

Dopisoval som si ohladom tohto s ATI a vyslo nakoniec totok.

http://support.ati.com/ics/support/K...estionID=22933

tu je cely topic

737-22933: No Direct3D Acceleration or Failure to Boot into Windows on Some VIA-Based Motherboards

The information in this article applies to the following configuration(s):

* Catalyst Display Driver 6.5, 6.6, 6.7, 6.8, 6.9
* VIA KT400 chipset
* Radeon® X1600 series
* Radeon® X1300 series
* Radeon® X800 series
* Radeon® X700 series
* Radeon® 9800 series
* Radeon® 9700 series
* Radeon® 9600 series
* Radeon® 9550 series
* Radeon® 9500 series
* Windows XP Professional
* Windows XP Home Edition
* Windows XP Media Center Edition

Symptoms
On some VIA chipset motherboards configured with an ATI AGP graphics product, attempting to boot Windows may fail and produce a black display or cause the system to restart. Other symptoms may include the desktop starting up in low resolution or color depth settings or Direct3D is disabled in the DirectX Diagnostics.

Other configurations may be affected.

Cause
Unknown at this time

Solution
For the following products, install Catalyst 6.10 display drivers.

* Radeon® X1600 series
* Radeon® X1300 series
* Radeon® X800 series



* Radeon® X700 series
* Radeon® 9800 series
* Radeon® 9700 series

For the following products, please install Catalyst 6.4 display drivers as a workaround. ATI Engineering has been advised of this issue and is investigating it. Any updates will be published when they become available.

* Radeon® 9600 series
* Radeon® 9500 series



* Radeon® 9550 series

Keby toti sulinovia nedavali medzi radeon x1600, takto najdem aj sam, maju tam sekcie cisto pre radeon vseobecne..no a ja som to hladal samozrejme pri x700..no co uz..

[MK2]

Dopisoval som si ohladom tohto s ATI a vyslo nakoniec totok.

http://support.ati.com/ics/support/K...estionID=22933

ak vam to nahodou nezobrazi tak cislo topicu je:

737-22933: No Direct3D Acceleration or Failure to Boot into Windows on Some VIA-Based Motherboards

Keby toti sulinovia nedavali medzi radeon x1600, takto najdem aj sam, maju tam sekcie cisto pre radeon vseobecne..no a ja som to hladal samozrejme pri x700..no co uz..

Tebe velmi vrelo odporucam vyskusat omega drivery

[sonic]

niekedy davno som skusal ale to iste..skusim najnovsie mozno to pomoze..dik ze si mi to pripomenul