Je spousta boardu co dokazou v pohode monitorovat ,ale regulace otacek na nich proste nefunguje./mysleno Speedfanem/
Je spousta boardu co dokazou v pohode monitorovat ,ale regulace otacek na nich proste nefunguje./mysleno Speedfanem/
4.25
- added EVENTS handling
- added full Intel ICH7 support
- added full SMSC LPC47M233 support
- fixed fan speed readings for SMSC LPC47B27X, LPC47M10X, LPC47M13X, LPC47M14X, LPC47M192, LPC47M292 and LPC47M534
- revisited DELL SMBIOS routines: added support for a wider range of INTEL chipsets and for more temperatures on the same system
- added preliminary support for ALI1573 SMBus
- added full support for WINBOND W83627EHG
- REMOTE temperature reading for LM99 now properly adds 16C
- added an additional check when testing UGURU support
http://www.almico.com/speedfan425.exe
nějaký mobilní hračičky
4.26 - greatly improved nVidia support (it should no longer go to high CPU usage and /NONVIDIAI2C should be no longer needed)
- EVENTS now can access SMART HD attributes
- fixed a memory leak in events' processing
- added full support for ANALOG DEVICES ADT7468
- added support for more nVidia video cards
- added support for ABIT AX8
- fixed FINTEK F75375S fan speed change (previously it didn't work)
- UGURU support is no longer probed through WMI (this fixes an error message that appeared to some users)
- verified to be working fine under Windows Vista
- added PWM control settings for WINBOND W83637HF in CONFIGURE / ADVANCED
- added advanced settings for the third fan of W83637HF
http://www.almico.com/speedfan426.exe
nějaký mobilní hračičky
4.28 - added IN-DEPTH HARD DISK ONLINE ANALYSIS tool
- added centralized INTERNET configuration tab in CONFIG dialog
- added support for NForce410
- added support for new video cards
- added Temperature Sensor Type, BJT Offset and Gain support for Fintek F75375S in CONFIGURE / ADVANCED (on Asus V9999 you might need to set BJT OFFSET from 174 to 202)
- SMART overall indicators are computed using a more advanced strategy
- updated the help file
- properly fixed byte swapped HDD model names
http://www.almico.com/speedfan428.exe
nějaký mobilní hračičky
Zvláštní, NOD32 mi to blokuje jako neznámý TSR.COM virus, takže raději bacha !
CPU: AMD Opteron DualCore, AC Freezer64 Pro, MB: DFI LP UT NF4 Ultra-D, modded bios N4D704-2BTA, RAM: 2x1GB 400DDR 2.6V, Graphic: Leadtek PX6800GS TD 256MB, PCI-E (425/1000), CASE: Chieftec 410W Silent DX-01SL-D, DVD: DVD-ROM Plextor 116A, DVD-RW LG GSA-4163B, fw:A105, HDD: 1x Seagate Barracuda 7200.7 120GB 8MB cache, 1x Seagate Barracuda 7200.8 250GB 8MB cache.
3DM01: xxx 3DM03: xxx 3DM05: xxx 3DM06: xxx Aquamark: xxx Sandra2005: xxx SuperPI: xxx
Jsem na tom stejně, už jsem na to Alfreda upozornil.Původně odeslal Tantalos
----------------------------
Tady je odpověď od Alfreda: "NOD32 always does its best to detect false positives![]()
Thank you for letting me know. I think NOD32 should be informed too so that
they can fix it."
Naposledy upravil Gentle Giant; 09.02.2006 v 15:31.
DFI LP UT nF4 Ultra-D, Athlon 64 X2 3800+, Leadtek Winfast PX6600GT TDH Extreme version,RAM 2x512MB OCZ Platinum Rev.2 400MHz,SATA Seagate Barracuda 7200.7+ 160GBNCQ,SATA2 Samsung 80GB, DVDRW LG4163B,DVDROM Samsung, case Sunbeamtech Transformer Black, air cooling, PSU Akasa Paxpower Black 460W, BIOS406.
Chtěl bych upozornit, že SpeedFan až do verze 4.27 při spuštění na desce DFI LanParty SLI-DR Expert vypíná/resetuje komp!
Řešením je spuštění s parametrem /NOSMBSCAN
Uvidíme, jestli to nová verze vyřeší...
MAUL: XEON 3350, ASUS P5Q-E, 4GB Corsair DDR2-1066, GB 6850/1GB, 2x1,5TB WD15EADS, Samsung SH-S203B, 24“ LCD DELL 2408WFPp, Antec Solo, Corsair HX620W
KRISSS: C2D E8400, GB EP35-DS3, 2GB Kingston DDR2-1066, GB 4850/1GB, WD5000AAKS, ASUS CB-5216A, 26“ LG W2600HP-BF, Seasonic 430W
MAULÍK: C2Q Q6600, GB EP35-DS3R, 2GB Corsair DDR2-1066, GB 4850/1GB, WD5000AAKS, Plextor PX-116A, 22“ LG Flatron L226W, Corsair VX450W
Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)