problém E6400 vs. MSI 945GCM5 V2

[firerush]

jo to jsme dělal, jiný bios jak E.3 není na tuto desku, E.3 je základní, děfault sem dával už tolikrát... ptž mi to nešlo ani zapnout.... mno nevím, co s tím

[rombo]

je tam sice psano ze to podporuje ale ne ve sve plne krase (frekvenci).. tj. chipset neni delanej na FSB 1066MHz coz je jasne napsany.. umi dle specifikaci jen 533/800MHz FSB.. to ze pujde naplno je sazkou do loterie ale MSI ti to nezarucuje takze mas smulu.. treba na Gigabyte desce s tim samym chipset problem nebyl a to je to tam taky ''nepodporovano'' a musi se to zapnout v BIOSu.. jediny co muzes udelat je pockat na dalsi BIOS jestli to neopravi


jinak asi takto:

According to the Intel North Bridge 945GC chipset spec, this board supports CPU of FSB 800MHz at maximum by default . However, you may let your board running at FSB 1066MHz (Core 2 Duo CPUs) by overclocking and adjusting the CPU FSB frequency in the BIOS:
Enter BIOS setup menu and go to [Frequency/Voltage Control] --> [Adjust CPU FSB Frequency]. There you can adjust the value to [266] for the Core 2 Duo E63XX/E64XX/ E66XX/E6700 CPUs. Please be noted that this is over-spec, and this overclocking behavior is not recommended and guaranteed.