Windows Vista - tipy,triky

[kecinzer]

RAM jsem nesledoval, ale předpokládám, že na tom budu stejně.

[PetrT]

To s tim kopirovanim jsem si nevsiml a pritom to delam skoro denne...jen se mi pri prehravani videa z meho pocitace (Vista) na PC u TV (XP) cca 3x behem filmu stava, ze se obraz na zlomek vteriny(vterinu) sekne. U XP jsem si toho nevsiml.

[Masster]

Tak je tu dalsi nasup.

http://support.microsoft.com/kb/941600

Issues that are fixed in the update rollup
925528 (http://support.microsoft.com/kb/925528/)
Stop errors occur on a Windows-based computer that has 2GB or more of RAM and is using an NVIDIA nForce USB controller
929734 (http://support.microsoft.com/kb/929734/)
You may experience problems after you resume a Windows Vista-based computer from sleep or from hibernation
930568 (http://support.microsoft.com/kb/930568/)
Error message when you try to put a Windows Vista-based computer to sleep or into hibernation: "STOP 0x000000FE BUGCODE_USB_DRIVER"
929478 (http://support.microsoft.com/kb/929478/)
After you use the Safely Remove Hardware option to remove a built-in optical drive from a portable Windows Vista-based computer, you may be unable to reconnect the drive
930570 (http://support.microsoft.com/kb/930570/)
Error message in the Usbhub.sys process when you wake a Windows Vista-based computer from sleep or from hibernation: "STOP 0x00000044"
928631 (http://support.microsoft.com/kb/928631/)
A USB device may no longer work correctly after Windows Vista resumes from sleep or from hibernation
933433 (http://support.microsoft.com/kb/933433/)
Recording quality is poor when you use a USB microphone on a Windows Vista-based computer that has 4 GB of RAM or more
933442 (http://support.microsoft.com/kb/933442/)
A USB composite device does not work after you disable and then enable the device in Device Manager on a computer that is running Windows Vista
934633 (http://support.microsoft.com/kb/934633/)
When you connect a USB multifunction printer device to a Windows Vista-based computer, a second instance of the printer object is created, and the first instance no longer works
934796 (http://support.microsoft.com/kb/934796/)
Error message on a Windows Vista-based computer that is running a USB composite device: "STOP 0x000000FE"
933824 (http://support.microsoft.com/kb/933824/)
The Safely Remove Hardware feature and the Windows Explorer "Eject" command do not work correctly with an Apple iPod that is connected to a Windows Vista-based computer
935782 (http://support.microsoft.com/kb/935782/)
A USB device takes a long time to resume from "selective suspend" mode on a Windows Vista-based computer that uses UHCI USB controllers
935783 (http://support.microsoft.com/kb/935783/)
When you resume a Windows Vista-based computer from sleep, you may experience unexpected behavior from a USB device

The following issues were not previously documented in a Microsoft Knowledge Base article:
• When the computer resumes from a suspend state or from a hibernation state, the computer stops responding. Additionally, you receive a "0x9F" stop message on a blue screen.
• The computer takes a long time to resume from a suspend state or from a hibernation state.
• The computer takes a long time to resume from a suspend state or from a hibernation state when you use a VIA controller.
• The computer stops responding when you use an AuthenTec USB fingerprint reader. Additionally, you receive a "0xFE" Stop error on a blue screen or a "0x9F" Stop error on a blue screen.
• The computer stops responding when you use a USB Bluetooth audio device.
• The computer takes a long time to resume from a suspend state or from a hibernation state when you use an Enhanced Host Controller Interface (EHCI) controller.
• The computer stops responding when you remove a USB device. Additionally, you receive a "0xFE" Stop error on a blue screen.
• When a computer resumes from a suspend state or from a hibernation state multiple times, you receive a "0xFE" Stop error on a blue screen.

[Mymak]

Tak je tu dalsi nasup.

http://support.microsoft.com/kb/941600

dikec za info, to je presne to co potrebuju - 2 totozne tiskarny v systemu, a jedna z nich nefunkcni, to je fakt vopruz

EDIT: tak to pomohlo, akorat bylo treba napred obe tiskarny pred restartem smazat