Ako unlocknut cpu voltage na nforce 550?

[lcdc]

Tu je odpoved z toho fora:

One topic on this at REbalsHaven
http://www.rebelshavenforum.com/sisu...;f=21;t=000490

Link to MSI for the MSI Platinum BIOS 1.7 ...this should be 100%stable...i never had any problens flashing this bios.

Make shure you have you old BIOS handy, you never know..

http://global.msi.com.tw/index.php?f...=1&prod_no=252

Ok remeber @Rebals Haven they used the ULTRA bios which is way buggy ..I will only use the PLATINUM BIOS 1.7 and also downloaded the manual so you know what device to disable that the board dosnt use...heare is a list just incase You can try 1.8 its newest Version and should also work the same as the 1.7....for referance ive used 1.5,1.6,1.7 all with no hassels. Do flash the 1.7ver first so you can see the new settings and then if your up to it you could try the 1.8...

You will have to apply the settings below! All other menu settings are the same as stock K9n-neof bios

MCP55 ACPI HPET Table Enabled
You will need to set the SATA to 0/1
you will need to us Mac Lan 0 and disable Mac Lan 1
you will need to diable IEEE1394 Controller
USB devices are the same
Audio is the same

Cell MENU

Vcore settings and DDRv setting Now adjustable!

PCI-E lock to (101) for overclocking!
Spread Spectrum Configuration,disable all of them for overclocking!

That should do it , Pm me if you have any more Questions.

Idem skusit a dufam, ze dam vediet z tohoto pc ...