LG GSA-H62N a CPU na 100% :-(

**Odar** · 12.08.2007, 21:37

Ahojte, mam MB Asus A7V600, primary master Maxtor 40 GB ATA 133, secondary master CD-RW LiteOn 48246S, na SATA mam napojenu novu LG GSA-H62N.

Ked kopcim z nej na HDD, tak vytazuje CPU na 100%. To urcite nie je dobre. V BIOSe som pozeral, ci tam nejako netreba nieco nastavit, ale nenasiel som nic. Drivery k MB mam nainstalovane na RAID, aj SATA.

Skusal som aj reinstalovat XP, ale na cistom XP s drivermi sa to sprava tak isto. Netusim, kde to nastavit, aby nesla cez PIO (alebo ako vlastne ide), ale cez DMA.

Dakujem.

EDIT:
Skusal som aj napalovat v Nerovi - nejde to, uz pri leadin vyhodil chybu

Kód:

Odar

1C82-A0K5-19E5-MAAX-400E-0149-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder:             <HL-DT-ST DVDRAM GSA-H62N>Version: CL00 - HA 1 TA 0 - 7.9.6.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVDRAM GSA-H62N >Version: CL00 - HA 1 TA 0 - 7.9.6.0
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : Maxtor 6E040L0                   atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON LTR-48246S               atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : HL-DT-STDVDRAM GSA-H62N CL00  viasraid Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H62N   E:   CdRom0
LITE-ON LTR-48246S         F:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (83886080) Byte
BUFE           : 0
Physical memory     : 1023MB (1048092kB)
Free physical memory: 574MB (588236kB)
Memory in use       : 43 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

12.8.2007
UDF/ISO compilation
22:03:22	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
22:03:23	#2 Phase 112 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation started
	
22:03:23	#3 Phase 114 File dlgbrnst.cpp, Line 1762
	DVD-Video files reallocation completed (no file modified)
	
22:03:23	#4 Text 0 File Isodoc.cpp, Line 6663
	UDF document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	UDF Mode                : UDF/ISO bridge
	UDF Options             : automatic
	UDF Revision            : 1.02
	UDF Partition Type      : physical
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : FALSE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
22:03:23	#5 Phase 111 File dlgbrnst.cpp, Line 1762
	DVD-Video files sorted
	
22:03:23	#6 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
22:03:23	#7 ISO9660GEN -11 File Geniso.cpp, Line 3343
	First writeable address = 0 (0x00000000)
	
22:03:23	#8 Text 0 File Burncd.cpp, Line 3508
	Turn on Disc-At-Once, using DVD media
	
22:03:23	#9 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2283631 (507:28.31, 4460MB)
	
22:03:23	#10 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD DVD)
	
22:03:23	#11 Text 0 File DlgWaitCD.cpp, Line 2964
	Recorder: HL-DT-ST DVDRAM GSA-H62N, Media type: DVD-R
	 Disc Manufacturer: MBI 01 - RG40
	 Disc Application Code: 64, Disc Physical Code: 193
	
22:03:23	#12 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
22:03:23	#13 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2283632 (2283632) = #2283632/507:28.32
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283632 blocks [E: HL-DT-ST DVDRAM GSA-H62N]
	--------------------------------------------------------------
	
22:03:23	#14 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [E: HL-DT-ST DVDRAM GSA-H62N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4676878336, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2283632 |        0 | 0x00
	  2283632 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
22:03:23	#15 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
22:03:23	#16 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
22:03:23	#17 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
22:03:23	#18 Text 0 File Burncd.cpp, Line 4413
	Cache writing successful.
	
22:03:23	#19 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
22:03:23	#20 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 4x (5 540 KB/s)
	
22:03:23	#21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
22:03:23	#22 Text 0 File DVDR.cpp, Line 3225
	Recording mode: Sequential Recording Mode
	
22:03:23	#23 Text 0 File DVDR.cpp, Line 3381
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
22:03:23	#24 Text 0 File Cdrdrv.cpp, Line 9872
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Revision number of maximum recording speed: 6.0
	  Revision number of minimum recording speed: -
	  Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
	  Class: 0
	  Start sector number of the current Border-Out: 2FE10 h
	  Start sector number of the next Border-In:     2FFA0 h
	 Media Specific [16..63]:
	    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
22:03:23	#25 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
22:03:31	#26 Text 0 File Cdrdrv.cpp, Line 1352
	22:03:31.125 - E: HL-DT-ST DVDRAM GSA-H62N : Queue again later
	
22:04:04	#27 SPTI -500 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x06c40040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
22:04:07	#28 SPTI -1114 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 0C 29 
	Buffer x0619d000: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
22:04:07	#29 CDR -1114 File Writer.cpp, Line 303
	Reset occurred
	E: HL-DT-ST DVDRAM GSA-H62N
	
22:04:09	#30 Text 0 File DVDR.cpp, Line 3783
	EndDAO: Last written address was -1 (FFFFFFFFh)
	
22:04:09	#31 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 4x (5 540 KB/s)
	
22:04:10	#32 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
22:04:15	#33 Text 0 File Cdrdrv.cpp, Line 11185
	DriveLocker: UnLockVolume completed
	
22:04:15	#34 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Zdenek Dubnicky** · 12.08.2007, 22:13

Máš poslední bios?

**Odar** · 12.08.2007, 22:15

Sak to. Nie. Mam 6.0. Pozeral som na stranke, ze je uz 6.1008. Mas to odskusane? Pojde to s nim?

Tu su este nastavnia, ako mi nahodil WIN XP
http://img180.imagevenue.com/img.php..._122_492lo.jpg
http://img161.imagevenue.com/img.php...122_1080lo.jpg
http://img102.imagevenue.com/view.ph...122_1181lo.jpg

All sa zda byt OK, az na to, ze tu SATA napalku hodil akoby IDE...co sa mi vobec nepaci.

Edit:
Tak som flashol na verziu 1009.005 Beta. Co bola posledna nie BETA verzia A7V61008.AWD, tam mi pisalo, ze je starsia, ako aktualna, co je v PC. Stale pri kopirovani 100% CPU

**Geeker** · 13.08.2007, 06:52

Původně odeslal Odar

Sak to. Nie. Mam 6.0. Pozeral som na stranke, ze je uz 6.1008. Mas to odskusane? Pojde to s nim?

Tu su este nastavnia, ako mi nahodil WIN XP
http://img180.imagevenue.com/img.php..._122_492lo.jpg
http://img161.imagevenue.com/img.php...122_1080lo.jpg
http://img102.imagevenue.com/view.ph...122_1181lo.jpg

All sa zda byt OK, az na to, ze tu SATA napalku hodil akoby IDE...co sa mi vobec nepaci.

Edit:
Tak som flashol na verziu 1009.005 Beta. Co bola posledna nie BETA verzia A7V61008.AWD, tam mi pisalo, ze je starsia, ako aktualna, co je v PC. Stale pri kopirovani 100% CPU

Zkus jiny SATA port. Pripadne prepnout na native SATA.

**Odar** · 13.08.2007, 07:23

Native SATA? To by malo byt niekde v BIOSe? So SATA zariadeniami som zatial nerobil - ani ma nenapadlo, ze to bude taky problem. Skusal som dat aj najnovsie ovladace z ofiko stranky, ale nic nepomohlo. Este dnes skusim reinstal. WIN, ci sa to nahodou na ten novy BIOS nechyti. Ale velmi tomu neverim.

**Geeker** · 13.08.2007, 07:41

Reinstall bych delal az jako posledni moznost. Zkus zmenit SATA port pripadne mrkni do manualu na to native SATA, IDE enhanced adt.

**Odar** · 13.08.2007, 08:05

OK, vecer kuknem, ale mam pocit, ze to nebude take jednoduche:

Citujem z
http://vip.asus.com/forum/view.aspx?...Language=en-us

Just bought a Samsung SH-S183A SATA DVD burner. And after installing it, my XP won't boot at all. I can see the XP boot screen, then my computer just reboots. Vista boots, but i actually get a blue screen once I try to read a CD from the drive.
The drive shows up in the SATA post screen, and it shows up in Vista. But as I said, I can't get XP to boot at all. I have installed the latest bios upgrade, and I have tried to change the SATA cables in case there was something wrong with my cable.

Any posibility the A7V600 does not support Optical SATA drives, or is there simply something wrong with my new drive?

--------------------------------------------------------------
t is very likely that your mainboard storage controller may not be able to communicate with the SATA optical. I think I would contact Via technical support and see what they have to say...

**peta303** · 13.08.2007, 13:17

Co tam je za ovladače SATA řadiče? I v nich by mohl být problém.

**Odar** · 13.08.2007, 13:35

Ovladace na SATA som daval normalne, co su na ofiko stranke ASUS...

EDIT:
tak som skusil aj ovladace na VIA KT600 z VIA.COM a nic...stale to iste...najjednoduchsie bude asi vymenit ju za LG GSA-H55N.

No co uz...

**Millisx** · 17.08.2007, 22:53

Já ti sice neporadím jak to vyřešit, nicméně mohu potvrdit. ASUS A7V880, i čerstvě nainstalovaný win XP po připojení SATA optické mnechaniky prostě nenastartuje(POST OK, v BIOSu se mechanika detekuje). Po odpojení mechaniky opět vše OK. Rovněž jsem vyřešil výměnou za IDE.

**peta303** · 17.08.2007, 23:45

Napadá mě ještě jedna věc - tohle by se mohlo týkat řadiče, který se neumí tvářit jako běžný IDE řadič (poznatelné při instalaci XP na SATA disk, kdy v tomto případě vyžadují driver). Teoreticky. Z toho pohledu by to mohlo (ale nemuselo) dělat problémy u přídavných řadičů, apod.

Pozn.: kdybych plácl nějakou blbost, jsem utahaný z práce

**Paolo** · 18.08.2007, 09:53

Problém je v tom, že nemáš zapnutý DMA přístup...

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GSA-H62N CL00 viasraid Port 2 ID 0 DMA: Off

...tím pádem to jede přes PIO mód a vytěžuje to CPU.

**peta303** · 18.08.2007, 12:29

Jenže jemu se to na tom SATA řadiči nedaří nastavit...

Zkusil bych ještě ve Správci zařízení projít, zda nebude při troše štěstí schovaný mezi kanály IDE řadiče a tam na jednom z primárů najít zařízení, které neběží na DMA, ale těžko říci - některé SATA řadiče se zařadí jako SCSI a tyhle možnosti nastavení neposkytují. Maximálně utilitkou z ovladačů.

**Paolo** · 19.08.2007, 18:31

To právě nevím, jestli se mu to nedaří, nebo to ani nezkoušel. Nikde tu totiž nevidím, že by se tím zaobíral...

**.Voivod.** · 02.11.2007, 21:42

Zkusil bych dvě věci. Napřed Clean pack. Ten v sobě skrývá dva šikovné prográmky. První program je detekční Driver-CleanTool, který si po spuštění ošahá ovladače a pokud najde nějaký konflikt, tak označí mechaniku, ke které se problém vztahuje. Druhý program je RegistryChecker, který velmi rychle provede potřebné změny. To poznáte podle toho, že vás vyzve k restartu počítače. Najdeš ho zde:
http://www.cdrhard.cz/view.php?cisloclanku=2004100101

A kdyby nepomohlo, tak odinstalovat IDE ovladače a nechat tam po restartu jen ty Windowsácký.

Každopádně tím nic nezkazíš.

Téma: LG GSA-H62N a CPU na 100% :-(

Nástroje témat

Zobrazení

LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a PU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Re: LG GSA-H62N a CPU na 100% :-(

Informace o tématu

Users Browsing this Thread

Pravidla přispívání