Wifi na D-Link G664T

[silenec]

Tak rshaper funguje vyborne, muzu pustit i torrenty naplno a nad stanovenou hranici rychlost nepreleze. S tim flashovanim to neni tak uplne jednoduche, pokud chces met jistotu ze v modemu pojede, tak je potreba zkontrolovat jaky modem pouziva bootloader - adam2 nebo psp:

In order to ascertain the bootloader that your router is using, you should telnet or ssh to the router, and run the command:
Code: cat /proc/ticfg/env
If the "bootloaderVersion" is 1.2.x (or 1.3.x or 1.4.x), AND the "PROMPT" contains something like "psbl" then your router is using the PSP bootloader, and you should use the firmware with "pspboot" in the filename.

By the same token, if your "bootloaderVersion" is something like "0.22.x", AND the "PROMPT" contains something like "Adam2", then your router is using the Adam2 bootloader, and you should use the firmware with "adam2" in the filename.

WARNING: if the output of the "cat /proc/ticfg/env" command includes anything like "WLAN_EEPROM0", "WLAN_EEPROM1", etc., then that is a sure sign that your router has an incompatible wireless chip, and you should NOT try putting this firmware on your router. Trying to do so WILL brick your router.

a jaky pouziva pametovy chip - AMD/Intel nebo ATMEL, asi jediny zpusob jak to udelat je otevrit modem... u me to byl chip amd a podle toho zvolit verzi firmwaru...
potom jeste zalezi, jestli se flashuje kernel + filesystem + config zvlast nebo dohromady, tady muze nastat problem, protoze pro AMD/Intel verzi se nepocitalo se single image verzi, takze neni k dispozici. Mela by byt soucasti dalsi verze firmwaru 2.3... U dlinku si nejsem jisty jakou verzi potrebuje, ja jedu se single image betaverzi 2.3 ktera me byla poskytnuta, nekdo me psal ze mu to jede s 2.2, co tam flashnul nevim.
Nejlepsi by asi bylo pockat na 2.3, mela by uz oficialne podporovat g664t a pokud se nepletu, tak v soucasne 2.2 jeste neni rshaper.