Linux home Server

[NeMeM9aA]

  hdparm -tT /dev/hde

/dev/hde:
 Timing cached reads:   224 MB in  2.01 seconds = 111.44 MB/sec
 Timing buffered disk reads:   82 MB in  3.04 seconds =  26.97 MB/sec
root@Slackrouter:~# hdparm /dev/hde

/dev/hde:
 multcount    = 16 (on)
 IO_support   =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 30401/255/63, sectors = 250059350016, start = 0

Pro srovnani jeste hodim test stejneho typu disku na ATA radici na K8T800pro/vt8237:

/dev/hda:
 Timing cached reads:   3136 MB in  2.00 seconds = 1568.24 MB/sec
 Timing buffered disk reads:  212 MB in  3.02 seconds =  70.10 MB/sec

/dev/hda:
 multcount    = 16 (on)
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 30401/255/63, sectors = 488397168, start = 0

Jinak ten router funguje stabilne. Routuje dostatecne "rychle" a nejsou s nim problemy, takze jsem to neresil. Fileserver nejak intenzivne nevyuzivam. Osobne bych podezrival desku a nizkou propustnost PCI.
Taky tomu nepomuze to, ze je to 250GB disk a je tam pouze jeden partition. (krome swapu samozrejme). Fs reiser.