Ti to tam pisou
GPU:
After soldering up the shunting 2.7kOhm resistor to pins 18 and 20 of the chip, as shown in the picture…the graphics core voltage rose up to 1.75V. The voltage grew 16.7% above the nominal value.
MEMORY I/O
Before modification, the graphics memory I/O circuitry voltage (VDDQ) was 2.78V. After we soldered up a 10kOhm resistor to pins 1 and 4 of the chip as shown in the picture……the output voltage grew up to 3.19V.
MEMORY VDD
No a pak na piny 5 a 7 prihodili dalsi odpor cimz dostali z 2.92 - 3.32.

Akorat jestli u 9500NP budou pouzite stejne soucastky...(an impulse regulator with SC1175CSW control circuit from Semtech ....)

A co 9500Pro Taky by tam mohli neco podobneho strelit