Výsledky 1 až 25 z 76

Téma: Pumpy na +12V

Threaded View

Předcházející příspěvek Předcházející příspěvek   Další příspěvek Další příspěvek
  1. #11

    Standardní Re: Pumpy na +12V

    Citace Původně odeslal epidot
    ten eheim hpps plus ma 3 nastavitelne mody behu pomoci jumperu pod zadnim modrym krytem..... take rikaji ze zmenou techto modu se prichazi o zaruku

    Changing the modes will VOID THE WARRANTY. To change the mode - pull off the blue end cap, extract the control board and move the jumpers to the setting you want to use.

    Silent Mode: In Silent Mode the microprocessor in the pump changes the operating instructions the pump's drive so the pump becomes completely "inaudible". The pump however loses some pumping performance (5.4 foot discharge head - which is still more than sufficient.)

    Power Mode:In Power Mode the pump's microprocessor boosts the maximum operating voltage to bring the discharge head closer to 13 feet and looks independently for the maximum possible operating point! The pump will no longer be very quiet, but the performance increase is signifcant.

    Normal Mode (delivery condition): This is the compromise between maximum performance and minimum noise. This is generally the optimal operating condition in normal water cooling systems - the pump is almost inaudible and still has extreme performance (6.7 foot discharge head).
    rad bych zapnul u HPPS SILENT MOD, ale nejak nerozumim tomu, proc bych mel prijit o zaruku? Je na tom snad neco riskantniho? Muze dojit ke zniceni cerpadla? nebo jak tomu mam rozumet...diky za odpoved
    Naposledy upravil MegaKremilek; 18.02.2006 v 22:48.

Informace o tématu

Users Browsing this Thread

Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)

Pravidla přispívání

  • Nemůžete zakládat nová témata
  • Nemůžete zasílat odpovědi
  • Nemůžete přikládat přílohy
  • Nemůžete upravovat své příspěvky
  •