Takz podla mna niesu konflikty irq, ale pre istotu dmesg (dam to sem cele, pjominte )
Kód:Linux version 2.4.22 (root@midas) (gcc version 3.2.3) #6 Tue Sep 2 zone(1): 36848 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=307 Initializing CPU#0 Detected 791.415 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1579.41 BogoMIPS Memory: 158800k/163776k available (1813k kernel code, 4588k reserved, 614k data, 116k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 00:07.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded vesafb: framebuffer at 0xd0000000, mapped to 0xca80d000, size 937k vesafb: mode is 800x600x8, linelength=800, pages=7 vesafb: protected mode interface info at c000:0f03 vesafb: scrolling: redraw Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt2c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA hda: WDC WD200EB-32CSF0, ATA DISK drive blk:queue c03a9d80, I/O limit 4095Mb (mask 0xffffffff) hdd: ASUS CRW-5224A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(33) hdd: attached ide-cdrom driver. hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 > SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1309.200 MB/sec 32regs : 785.200 MB/sec pIII_sse : 1621.600 MB/sec pII_mmx : 1774.800 MB/sec p5_mmx : 1852.000 MB/sec raid5: using function: pIII_sse (1621.600 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5+(22/07/2002) Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with orderd data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed Adding Swap: 297160k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 122M agpgart: Detected Via Apollo Pro chipset agpgart: AGP aperture is 64M @ 0xd8000000 scsi0 : SCSI host adapter emulation for IDE ATAPI devices 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 11 for device 00:09.0 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 eth0: RealTek RTL8139 Fast Ethernet at 0xca94f000, 00:06:4f:0a:2e:9b, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. isapnp: Scanning for PnP cards... isapnp: Card '3Com 3C509B EtherLink III' isapnp: 1 Plug & Play card detected total eth1: 3c5x9 at 0x220, 10baseT port, address 00 20 af 6b fd a7, IRQ 12. 3c509.c:1.19 16Oct2002 becker@scyld.com http://www.scyld.com/network/3c509.html PCI: Found IRQ 5 for device 00:07.5 PCI: Setting latency timer of device 00:07.5 to 64 usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:07.3 PCI: Sharing IRQ 11 with 00:09.0 uhci.c: USB UHCI at I/O 0xd400, IRQ 11 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 11 for device 00:07.3 PCI: Sharing IRQ 11 with 00:07.2 PCI: Sharing IRQ 11 with 00:09.0 uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected parport0: PC-style at 0x378 [PCSPP,EPP] parport_pc: Via 686A parallel port: io=0x378
Kód:Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0xffffffff (-1) Link detected: yes
Settings for eth1:
mii-tool hlasi eth0 okiKód:Supported ports: [ TP AUI BNC ] Supported link modes: 10baseT/Half 10baseT/Full Supports auto-negotiation: No Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: BNC PHYAD: 0 Transceiver: internal Auto-negotiation: off Current message level: 0x00000002 (2) Link detected: yes
eth1 (3com)siocgmiiphy no eth1 failed. operation not supported, a na tom momentalne pracujem.
Inak na 2 PC sa nepingnem, ale cez arp ho vidim ako incomplete. Dik za pomoc
[edit by Rainbow] Dal som to do citatelneho tvaru
Odpověď s citací