Mam tento problem s fanconrol:
Kód:
# pwmconfig 
This program will search your sensors for pulse width modulation (pwm) 
controls, and test each one to see if it controls a fan on 
your motherboard. Note that many motherboards do not have pwm 
circuitry installed, even if your sensor chip supports pwm. 

We will attempt to briefly stop each fan using the pwm controls. 
The program will attempt to restore each fan to full speed 
after testing. However, it is ** very important ** that you 
physically verify that the fans have been to full speed 
after the program has completed. 

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
Vsetko ostatne, co sa tyka lm-sensors ide normalne, teploty, otacky, napatia ukazuje spravne. Ma to niekto rozbehane na ABIT NF7-S? Surne potrebujem stisit vetrak(je v predu case a dost huci )

Asi tato doska nema pwm chips, ako sa da este softwarovo znizit rychlost vetraku v linuxe? v speedfan mi to funguje bez problemov.

Diki