Linux v konzoli, vase postrehy

[Lopan]

Jelikoz emergovani gnome trva fakt dlouho tak jsem furt na konzoli a zacina se me to libit takze by me zajimali veci okolo konzole ve vyssim rozliseni, vyssim refreshu, lynx + mys + obrazky atd.
Jedine co o tom vim je ze existuje nejaky framebuffer ale to je vse
Dik za pripadne info

[KtK]

da se na fb delat prakticky vsecko, myslim, ze wong o tom vi hodne Ma compa bez Xek.. Ja jen tak pro srandu zkusil pustit v konzoli v mplayeru film na framebuffer, a slapalo to..

EDIT: jestli ti vadi dlouhy loadovani gnome, di do WindowMaker-u.

[Wohmatak]

vyssi rozliseni - dle nastaveni framebuffer (mrkni do lilo.conf)

       vga=<mode>
              This  specifies  the  VGA text mode that should be selected when
              booting.  It may be specified as a global option.  The following
              values are recognized &#40;case is ignored&#41;&#58;

              normal&#58; select normal 80x25 text mode.

              extended &#40;or ext&#41;&#58; select 80x50 text mode.

              ask&#58; stop and ask for user input &#40;at boot time&#41;.

              <number>&#58;  use  the corresponding text mode. A list of available
              modes can be obtained  by  booting  with  vga=ask  and  pressing
              &#91;Enter&#93;.

              If  this  variable is omitted, the VGA mode setting contained in
              the kernel image is used. &#40;And that is set at compile time using
              the  SVGA_MODE variable in the kernel Makefile, and can later be
              changed with the rdev&#40;8&#41; program.&#41;

osobne mam vga = 0x517, coz je specialne kvuli vesa patchu (viz nize), ale muzes to tam psat i v decimaleech (tudiz tam muzes napsat proste 791

koukam ze to tu rovnou mam takze:

    | 640x480  800x600  1024x768 1280x1024                                      
----+-------------------------------------                                      
256 |  0x301    0x303    0x305    0x307                                         
32k |  0x310    0x313    0x316    0x319                                         
64k |  0x311    0x314    0x317    0x31A                                         
16M |  0x312    0x315    0x318    0x31B

ad refresh: http://tomahawk.iglu.cz/gentoo/patch...afb-rrc.tar.gz

ad mys: man gpm (/etc/init.d/gpm start) - dej si to do USE flagu

ad obrazky: kompiluj links (ne lynx) s podporou:
[ebuild R ] net-www/links-2.1_pre11 +ssl -javascript +png +X +gpm -tiff +fbcon +svga +jpeg
a pak kdyz budes hodnej tak ti to mozna i pojede

links:

Options are:

 -g
  Run in graphics mode.

 -driver <driver name>
  Graphics driver to use. Drivers are&#58; x, svgalib, fb, directfb, pmshell,  atheos.
  Available drivers depend on your operating system and available libraries.

[Gargamel]

No VESA pouzivej jenom pokud mas nVidiu, na ATIny i Matroxy sou v kernelu primo akcelerovane ovladace, ktere chodi bez problemu a treba takovy links na directfb s Matroxovyma DirectFB ovladacama je uplne super (treba i ve 2048x1536 (tusim) pekne plynule a bez blikani)

[Wohmatak]

pravda, na ATiny sou lepsi fb ovladace nez vesa...

...kazdopadne IMO je to dost k nicemu to mas daleko lepsi dat si nakej lightweight wm...

nema ma snad nekdo naky opravdu dobry duvod proc je fb o tolik lepsi nez Xka? nepocitam ted komply jako multimedialni stanice apod. (a i tam je to sporny)

[Lopan]

4Tomahawk: proste jen tak

[Gargamel]

No proste frajerina, ja sem chtel radeonfb aby to neblikalo (60Hz), driv sem na Matroxovi poustel filmy protoze sem na serveru nemel Xka...

[Wohmatak]

No proste frajerina, ja sem chtel radeonfb aby to neblikalo (60Hz), driv sem na Matroxovi poustel filmy protoze sem na serveru nemel Xka...

blikani resi ten vesafb patch, zustava akorat otazka akcelerace

[Lopo]

stejne je najvacsia frajerina pozerat film skrz AA-lib ...

[wong]

stejne je najvacsia frajerina pozerat film skrz AA-lib ...

jo to je, ale vazne treba takovy simpsni kdyz nesedis uplne u monitoru vypadaji DOST dobre