Jak Ti na tohle mam odpovedet....

Zasada c. 1) NEflashovat BIOS novejsi verzi pokud vykazuje jakekoli anomalie... Pouze az kdyz se na beton presvedcis, ze chybu nezpusobuje zadna komponenta. Pote muzes prstoupit k oprave. S tim co jsi udelal, jsi mel temer 100% zaruku umrtveni desky...

BTW: Postupoval jsi presne podle tohoto navodu ?
Award: The boot-block BIOS will execute an AUTOEXEC.BAT file on a
bootable diskette. Copy an Award flasher & the correct BIOS *.bin file on the
floppy and execute it automatically by putting
AWDFLASH *.bin /sn /py /cc /r in the AUTOEXEC.BAT file.
The * would be the correct bios .bin file and there
must be spaces between the slash marks. Put it in the floppy and turn on the
computer when the floppy seeks it will load the correct bios and reboot by
itself. When it finishes you have to remove the floppy and enter the cmos
SETUP and modify the CMOS for your configuration.
Kompletni vyklad prikazu najdes zde - http://www.plasma-online.de/textual/...ash_award.html

Checksum error muze mit vice pricin - slabou CMOS baterii, (cmos checksum error) virus, mechnickou zavadu samotneho chipu, chybne naformatovany hdd, chybne pameti apod. Samotny zatuh pak muze zpusobovat napriklad zdroj... Zkousel jsi vsechny komponenty i v jinem pocitaci ? JInak si nemuzes byt jisty, ze jsou nezavadne...

Zkus pohledat na strankach http://www.badflash.com/ a precti si FAQ na http://www.wimsbios.com/ To by ovsem mel udelat kazdy kdo se chysta k necemu podobnemu jako ty....

Rozsahlou diskusi muzes najit take zde - http://www.lanyoncomputers.com.au/co...18&thread=3961

A jestli Ti nepomuze nic z tohoto, tak snad uz pouze vymena ROMky...