[root@david root]# gmplayer -channels 6 -v
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale


MPlayer 0.90rc4-3.2.1 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 50 audio & 135 video codecs
CommandLine: '-channels' '6' '-v'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf : No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed : 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
get_path('Skin') -> '/root/.mplayer/Skin'
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
cmd: 20
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.

Playing /mnt/cdrom/WindTalkers0.avi
Not an URL!
File size is 728657920 bytes
CACHE_PRE_INIT: 0 [0] 0 pre:0 eof:0
Cache fill: 0,00% (0 bytes) AVI file format detected.
list_end=0x2286
======= AVI Header =======
us/frame: 40000 (fps=25,000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 104886 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 680 x 280
list_end=0x10F4
==> Found video stream: 0
======= STREAM Header =======
Type: vids FCC: divx (78766964)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 25/1 = 25,000
Start: 0 Len: 104886
Suggested BufferSize: 66865
Quality -1
Sample size: 0
found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 680
biHeight 280
biPlanes 1
biBitCount 24
biCompression 808802372='DX50'
biSizeImage 571200
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x217A
==> Found audio stream: 1
======= STREAM Header =======
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 40000/16 = 2500,000
Start: 0 Len: 10488600
Suggested BufferSize: 20480
Quality -1
Sample size: 16
found 'wf', 18 bytes of 18
======= WAVE Format =======
Format Tag: 8192 (0x2000)
Channels: 5
Samplerate: 48000
avg byte/sec: 40000
Block align: 16
bits/sample: 0
cbSize: 18
Unknown extra header dump: [0] [0] [0] [0] [0] [0] [0] [0] [0] [0] [f0] [fe] [46] [8] [28] [0] [0] [0]
list_end=0x2286
Broken chunk? chunksize=1394 (id=JUNK)
list_end=0x2B3B36DA
Found movie at 0x280C - 0x2B3B36DA
Reading INDEX block, 209760 chunks for 104886 frames (fpos=0x2b3b36e2)
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x500C)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=555768160 (104886) audio size=167817600 (10488600)
VIDEO: [DX50] 680x280 24bpp 25,00 fps 1059,8 kbps (129,4 kbyte/s)
[V] filefmt:3 fourcc:0x30355844 size:680x280 fps:25,00 ftime:=0,0400
get_path('sub/') -> '/root/.mplayer/sub/'
SUB: Detected sub file: /mnt/cdrom/WindTalkers0.srt
SUB: Detected subtitle file format: subviewer
SUB: Read 509 subtitles.
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
dec_audio: Allocating 3840 bytes for input buffer
dec_audio: Allocating 18432 + 65536 = 83968 bytes for output buffer
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 320,0 kbit/s
A52 flags before a52_frame: 0x37
A52 flags after a52_frame: 0x17
Using MMX optimized resampler
AUDIO: 48000 Hz, 6 ch, 16 bit (0x10), ratio: 40000->576000 (320,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
================================================== ========================
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
================================================== ========================
Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 6 channels, Signed 16-bit (Little-Endian)
alsa-init: compiled for ALSA-0.9.0rc6
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: hw:0,0
alsa-init: pcm opend in block-mode
alsa-init: unable to set channels: Invalid argument
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
Could not open/initialize audio device -> no sound.
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: liba52
Audio: no sound
Freeing 0 unused audio chunks
Starting playback...
This file was encoded with DivX501 Build481
[ffmpeg] aspect_ratio: 2,428571
VDec: vo config request - 680 x 280 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,43:1 - prescaling to correct movie aspect.
VO Config (680x280->680x280,flags=0,'MPlayer',0x32315659)
VO: [xv] 680x280 => 680x280 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel@goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 69 for hw scaling
[xv] dx: 0 dy: 0 dw: 680 dh: 280
*** [vo] Allocating mp_image_t, 688x288x12bpp YUV planar, 297216 bytes
[xv] dx: 0 dy: 0 dw: 680 dh: 280