OpenSUSE 10.0 a ATI driver

[Anduril]

Mam problem s instalaci ATI ovladace (fglrx) do OpenSUSE 10.0 (32bit) .. resp. nefunguje 3D akcelerace. Stahnul jsem balik (35MB) z ATI, vytvoril instalacni rpm balicek pro SUSE 10.0. IA32. Tento jsem nainstaloval podle pokynu, zadne chyby to nehlasilo. Pak jsem spustil sax2 (sax2 -r -m 0=fglrx -b /usr/share/doc/packages/fglrx/sax2-profile) a potom restartoval system. Vypada to, ze fglrx ovladac se sice pouziva, v XOrg.conf je imho vse jak ma byt, ale proste 3D nejede

Grafika je Sapphire R9000Pro.

# /.../
# SaX generated X11 config file
# Created on: 2006-02-12T00:38:21+0100.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
  Load         "dri"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "cz,us"
  Option       "XkbModel" "pc104"
  Option       "XkbOptions" "grp:shift_toggle"
  Option       "XkbRules" "xfree86"
EndSection


Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "7"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "Microsoft Wireless Optical Mouse?? 1.0A"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "6 7"
EndSection


Section "Monitor"
  Option       "CalcAlgorithm" "XServerPool"
  DisplaySize  340 270
  HorizSync    30-82
  Identifier   "Monitor[0]"
  ModelName    "AL1715"
  Option       "DPMS"
  VendorName   "ACR"
  VertRefresh  43-76
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "Device"
  BoardName    "RV250 If"
  BusID        "1:0:0"
  Driver       "fglrx"
  Identifier   "Device[0]"
  Option       "FSAADisableGamma" "no"
  Option       "TVHPosAdj" "0"
  Option       "Stereo" "off"
  Option       "FSAAMSPosX3" "0.000000"
  Option       "CenterMode" "off"
  Option       "FSAAMSPosY0" "0.000000"
  Option       "ScreenOverlap" "0"
  Option       "mtrr" "off"
  Option       "FSAAMSPosX4" "0.000000"
  Option       "FSAAMSPosY1" "0.000000"
  Option       "IgnoreEDID" "off"
  Option       "ForceGenericCPU" "no"
  Option       "NoTV" "yes"
  Option       "FSAAScale" "1"
  Option       "FSAAMSPosX5" "0.000000"
  Option       "FSAAMSPosY2" "0.000000"
  Option       "FSAAMSPosY3" "0.000000"
  Option       "GammaCorrectionI" "0x00000000"
  Option       "no_accel" "no"
  Option       "FSAAMSPosY4" "0.000000"
  Option       "FSAACustomizeMSPos" "no"
  Option       "UseFastTLS" "0"
  Option       "FSAAMSPosY5" "0.000000"
  Option       "TVVSizeAdj" "0"
  Option       "BlockSignalsOnLock" "on"
  Option       "FSAAEnable" "no"
  Option       "GammaCorrectionII" "0x00000000"
  Option       "TVHSizeAdj" "0"
  Option       "VideoOverlay" "on"
  Option       "TVVPosAdj" "0"
  Option       "no_dri" "no"
  Option       "TVColorAdj" "0"
  Option       "StereoSyncEnable" "1"
  Option       "UseInternalAGPGART" "no"
  Option       "FSAAMSPosX0" "0.000000"
  Option       "UseInternalAGPGART" "no"
  Option       "TVHStartAdj" "0"
  Option       "PseudoColorVisuals" "off"
  Option       "Capabilities" "0x00000000"
  Option       "FSAAMSPosX1" "0.000000"
  Option       "TVStandard" "NTSC-M"
  Option       "FSAAMSPosX2" "0.000000"
  Option       "OpenGLOverlay" "off"
  VendorName   "ATI"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection

Edit: Zkousel jsem taky pouzit vestavene ovladace, ktere by mely podporovat 3D akceleraci na DX8 ATInach (R9000/9200 atd), nicmene i kdyz jsem v sax2 3D akc. povolil, tak nefunguje.

[David Jaša]

1. Option "mtrr" "off" dej na on
2. Zkontroluj, že seš ve skupině "video" (příkaz groups, nejsi-li tak "usermod -a video username")

Pokud to nepůjde, tak si napiš druhou sekci "Device" s ovladačem radeon a pohraj si s jeho parametry (ty najdeš v man radeon), a v sekci "Screen" se odkaž na tuto sekci "Device".

[Anduril]

Tak jsem vyzkousel co jsi napsal a nic..furt stejne..porad se pouziva Mesa indirect >:{ Pritom pred tim jsem tam mel GF4Ti a s ovladacema od nvidie vsechno krasne behalo.. Zkousel jsem hledat i v googlu, ale zadnej navod nepomaha..

[David Jaša]

Ještě něco: projdi log (/var/log/Xorg.0.log) - někde tam pravděpodobně najdeš konkrétní důvod, proč DRI neběží. Takto to vypadá u mě:

(II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 8192 kB of Videoram available
(EE) SAVAGE(0): Insufficient Videoram available for 3D -- Try a lower color depth or smaller desktop.  For integrated savages try increasing the videoram in the BIOS.
(EE) SAVAGE(0): DRI isn't enabled

[Anduril]

Tak v tom logu je neco o problemu s AGP ..
[agp] unable to acquire agp, error "xf86_ENODEV"
..
a pak ze DRI inicializace selhala

Ale nevim co s tim..amd64_agp modul je nacteny

[David Jaša]

Ale nevim co s tim..amd64_agp modul je nacteny

Ještě je potřeba část pro danou kartu a možná modul drm. Nejspíš se bude jmenovat fglrx, ale nevím to jistě...