Mandrake 10.1 VT6410 Raid Install

[maros000]

Stiahol som si mandrake 10.1 instalujem linux prvy raz.... ale Stiahol som si drivery najnovsie... pre 9.2 na google som vygooglil ze by to malo ist tak som rozbalil a pozeram citam readme


Mandrake 9.2
1. prepare a blank floppy, format it to VFAT file system.
2. compile 2 driver, for BOOT and for UP, in the driver source directory
#mount /dev/fd0 /mnt/floppy
#make
#cp viamraid.o /mnt/floppy/viamraid_up.o
#make clean
#make -e NOMODVER=1
#cp viamraid.o /mnt/floppy/viamraid_BOOT.o
3. copy the patch.pl file to the floppy
#cp patch.pl /mnt/floppy/
#umount /mnt/floppy
4. the driver disk is OK, when install, after boot from the CD,
Press "F1", insert the floppy,
type "patch", then follow the install instructions.



ale dajak z toho neviem vyst, pokial by sa dalo dost polopatisticky...... mam knopix 3.6 viem ze to treba robit pod linuxom

[Fox!MURDER]

na tyhle raidy se vyprdni ... jsou k nicemu
linux ma vychytanej sw raid ..

[maros000]

Ale to asi tazko vies mam aj XP a chcelm by som aj Mandrake disk mam 2*40GB roz deleny na 10GB-XP 60-Data 10-volno(caka na mandrake)......
Via - nikdy viac...