Poradte prosim s traffic shapingem

[Tranceman]

Cusik lidi, v soucasne dobe se potykame v ramci Freenetove site v Liberci s problemem stahovacu. Nejlepsi by bylo sprovoznit nejaky traffic shaping na IP stahovacu, aby neblokovali linku.

prozatim tam mame tento script:

# Function to set HTB/SFQ shaper with fixed bandwidth on an IP address
set_shaper() {
IP=$1
SPEED=$2
ID=$3

tc class add dev eth0 parent 1:1 classid 1:$ID htb rate $SPEED ceil $SPEED
tc qdisc add dev eth0 parent 1:$ID handle $ID: sfq perturb 10
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst $IP/32 flowid 1:$ID
tc class add dev netcs0 parent 1:1 classid 1:$ID htb rate $SPEED ceil $SPEED
tc qdisc add dev netcs0 parent 1:$ID handle $ID: sfq perturb 10
tc filter add dev netcs0 protocol ip parent 1:0 prio 1 u32 match ip src $IP/32 flowid 1:$ID
}

### Individual IP address shaping example ###
### NOTE: ID should be a unique value >= 100

set_shaper 10.101.12.160 64kbit 100
set_shaper 10.101.20.137 64kbit 101
set_shaper 10.101.12.134 64kbit 102


#########################

Bohuzel to nefunguje..:o(( Pokud by nekdo nasel v cem je problem, tak at mi pisne..

Diky...

[Jezevec]

Merkni do siti, hledej na netu htb.init pripadne cbq.init. Funguje mi to celkem vpohode (HTB).

[Tranceman]

No ja bych chtel nejprve udelat nejakej script co by umel nastavit maximalni rychlost pro daneho uzivatel "sosaka". proste aby nebral celej bandwith..

nemoch bys mi ten tvuj script poslat? bych se an to juknul..:o)

Kdyztak ICQ 149 188-997

Diky

[Jezevec]

http://sourceforge.net/projects/htbinit/

stahni, precti si manual - je primo ve scriptu.