Jak nejrychleji opravit ve Fodore Core 3 kernel panic pri mountovani hdd.
Presouval jsem pomoci Norton Ghost 2003, mam ext3. Presun z 10GB PATA na 20GB PATA byl v pohode, ale z 20GB PATA na 160GB SATA to bohuzel neproslo. Vsechny disky jsou WD.
Presun Fedora PATA>>SATA-kernel panic
Jak nejrychleji opravit ve Fodore Core 3 kernel panic pri mountovani hdd.
Presouval jsem pomoci Norton Ghost 2003, mam ext3. Presun z 10GB PATA na 20GB PATA byl v pohode, ale z 20GB PATA na 160GB SATA to bohuzel neproslo. Vsechny disky jsou WD.
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
a nezmenilo se ti NAHODOU oznaceni disku z hda na sda?
Jeste vypis:
Reading all physical volumes. This may take a while
No volume groups found
No volume groups found
No volume groups found
mount error 6 mountnig ext3
mount error 2 mountnig none
switchroot: mount failed:22
umount /initrd/dev failed: 2
Kenel panic
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
A mas v jadre zapnutu podporu S-ATA diskov? Ved ti tam jasne pise, ze nenasiel disky. Zmenil si fstab?
C2D 6750(2660MHz)@(3600MHz pri 1.41V ), 450x8(1.37V-real 1.39V full load),MSI P35 Neo2
, PQI 2x1GB DDR2 800MHz@900MHz 4-4-4-12,Saphire 3850 256MB, powered by EC 450W
PC2: AMD x2 5000+(250x13), MSI K9N-SLI PLATINUM, 2GB RAM 800@819, MSI GF 8600GT silent
Ne nemenil. Byval bych hledal, ale to by na foru musel fungovat search. Postup jakym jsem klonoval jsem popsal-muj prvni SATA. Myslim si, ze zavadec hleda system na PATA disku. Zkus prosim popsat trochu postup. Jinak disk se me nemountuje ani kdyz je zapojeny PATA a SATA zaroven, atakze to bude podpora SATA disku v jadre...
edited: Melu blbosti. Diske se nenamountuje, protoze ma stejny LABEL a ne kvuli jadru. Jinak jadro 2.6.11
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Jinak muj fstab (pri bootu z PATA)
---------------------------------
# This file is edited by fstab-sync - see 'man fstab-sync' for details
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0
---------------------------------
Pri fdisk -l /dev/sda
Vypisuje informace o SATA disku, tak jak bych si predstavoval
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
fstab ti nepomuze, dulezity je parametr jadra "root=/dev/xxx"
In a world without fences and walls, who needs Gates and Windows? | Nesnáším wide monitory.
Workstation: Xeon E3-1275v5 :: Silentmaxx TwinBlock fanless :: Fujitsu D3417-B :: 32 GB ECC DDR4 :: Radeon Pro WX 2100 fanless :: Dell UP2715K :: Gentoo
Server: Xeon E3-1245v6 :: Supermicro X11SSH-F :: 32 GB ECC DDR4 :: Aquantia 5GBase-T :: 36 TB storage :: Gentoo Hardened
ted mam:Původně odeslal Gargamel
root=/dev/VolGroup00/LogVol00
edited: root (hd0,0). Zkousel jsem zamenu za sd0 ale nejede.
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Pastni sem lilo.conf alebo grub.conf...
Zalezi, ako mas rozdeleny disk, ci pouzivas boot disk, ...
V prvom rade musis mat nastaveny configurak zavadzaca(lilo,grub).
Podla mna by mal root vyzerat nejak takto:
root=/dev/sdaX , kde X je cislo particie, na ktorej mas root disk.
Ak pouzivas aj boot disk tak to treba nastavit podobne...
C2D 6750(2660MHz)@(3600MHz pri 1.41V ), 450x8(1.37V-real 1.39V full load),MSI P35 Neo2
, PQI 2x1GB DDR2 800MHz@900MHz 4-4-4-12,Saphire 3850 256MB, powered by EC 450W
PC2: AMD x2 5000+(250x13), MSI K9N-SLI PLATINUM, 2GB RAM 800@819, MSI GF 8600GT silent
Moje lilo.conf. Zkusim ted zmenit ten parametr boot.
prompt
timeout=20
default=linux
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
linear
image=/boot/vmlinuz-2.6.9-1.667
label=linux
initrd=/boot/initrd-2.6.9-1.667.img
read-only
root=/dev/VolGroup00/LogVol00
append="rhgb quiet"
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Tak je to jasne. Musis mat boot=/dev/sda
C2D 6750(2660MHz)@(3600MHz pri 1.41V ), 450x8(1.37V-real 1.39V full load),MSI P35 Neo2
, PQI 2x1GB DDR2 800MHz@900MHz 4-4-4-12,Saphire 3850 256MB, powered by EC 450W
PC2: AMD x2 5000+(250x13), MSI K9N-SLI PLATINUM, 2GB RAM 800@819, MSI GF 8600GT silent
Jakmile jsem to videl, tak jsem si to taky rekl, ale vypada to, ze stejne bootoval z PATA. Ted zkusim s boot=/dev/sda ten disk znovu naklonovat. bude to trvat okolo 20minut, potom se ozvu
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Ok, ale kukni si nejaky navod na lilo, napr.: http://www.lysator.liu.se/~forsberg/...with-lilo.html , lebo sa mi nezda cele to nastavenie root disku...
C2D 6750(2660MHz)@(3600MHz pri 1.41V ), 450x8(1.37V-real 1.39V full load),MSI P35 Neo2
, PQI 2x1GB DDR2 800MHz@900MHz 4-4-4-12,Saphire 3850 256MB, powered by EC 450W
PC2: AMD x2 5000+(250x13), MSI K9N-SLI PLATINUM, 2GB RAM 800@819, MSI GF 8600GT silent
Tohle lilo vytvarela fedora sama. Nikdy jsem ho nepotreboval upravovat bo mam na tom PC jen linux a nic jineho. Tak i kdyz mam v lilo.conf boot=/dev/sda tak to stejne nefunguje a bootoje to stale z PATA.
Ale uz jsem asi prisel na to cim to bude. Nijak jsem nad tim nedumal a postnul jsem sem LILO, ale ja nepouzivam LILO ale grub. Takze timto se chci omluvit, ze jsem sem postoval LILO. Vyrizuji mezitim spoustu telefonatu, tak jsem si nejak neuvedomil, ze uz na tom stroji nemam Slackware (tam jsem mel driv prave lilo) ale nove Fedoru.
Tohle je muj grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.11-1.14_FC3)
root (hd0,0)
kernel /vmlinuz-2.6.11-1.14_FC3 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
initrd /initrd-2.6.11-1.14_FC3.img
title Fedora Core (2.6.10-1.770_FC3)
root (hd0,0)
kernel /vmlinuz-2.6.10-1.770_FC3 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
initrd /initrd-2.6.10-1.770_FC3.img
title Fedora Core (2.6.9-1.667)
root (hd0,0)
kernel /vmlinuz-2.6.9-1.667 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
initrd /initrd-2.6.9-1.667.img
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
To je samozrejme naprosta blbost, protoze on tam ma LVM. Nemam s tim moc zkusenosti, tezko rict, jak to pujde zmenit, kazdopadne nejjednodussi bude asi nabootovat nejaky Rescue system z CDcek/DVD Fedory at si to opravi sama.
Jinak GRUB umi autocomplete, takze editaci commandliny, napsanim root ( a zmacknutim TAB se ukazou vsechny disky, napsanim treba hd0, a TAB se ukaze vypis partition. Cislo hdxxx hodne zalezi na BIOSu, jestli je nastaveny Legacy SATA mod nebo cisty SATA. (toto cislo se pak neshoduje s sda nebo hda napr.).
In a world without fences and walls, who needs Gates and Windows? | Nesnáším wide monitory.
Workstation: Xeon E3-1275v5 :: Silentmaxx TwinBlock fanless :: Fujitsu D3417-B :: 32 GB ECC DDR4 :: Radeon Pro WX 2100 fanless :: Dell UP2715K :: Gentoo
Server: Xeon E3-1245v6 :: Supermicro X11SSH-F :: 32 GB ECC DDR4 :: Aquantia 5GBase-T :: 36 TB storage :: Gentoo Hardened
Ono je to blbost z ineho dovodu. boot= urcuje len to, kam sa ma LILO nainstalovat. Nijako to nesuvisi s bootovanim. Bootuje sa z toho, co sa posle jadru ako root= parameter.To je samozrejme naprosta blbost, protoze on tam ma LVM.
1: Asus P2B 1.10 • Celeron 1100@1364/1.8V • 512MB SDRAM • Samsung SP1213N+WD AC28400 • Toshiba XM-6402B+SD-M1212 • PowerColor AR2L Radeon 9100 64MB • 3C900-Combo • Bt848A • ASB-3940UA • AWE-64 • DTK PTP-3007 • VisionMaster 405 • Umax UC630 • Star LC24-200 Colour 2: PCPartner TXB820DS • Cyrix MII PR300/1.8V • 256MB SDRAM • 2xSamsung HD400LD+IT8212F • Accesstek CW4001 • LS-120 • Mystique 4MB • Millennium II 4MB • 3C509 • CMI8329A+Dream MIDI • ADI ProVista E44 • SyncMaster 203B Notebook: DTK FortisPro TOP-5A • P166MMX/1.8V • 80MB EDO • Hitachi 5K80 40GB • 12,1" TFT Router: A-Trend ATC-1425B • i486DX 50@33/5V • 48MB FPM • WD AC14300 • UMC UM9003F • HP PC LAN 16/TP+ Car: Mazda 323P BA • Z5 1489ccm, 65kW@5500rpm, 134Nm@4000rpm
Nemam moznost pouzit Legacy SATA v BIOSu, jinak si myslim, ze by me to fungovalo uplne normalne. Kdyz tam mam jen SATA disk tak je k dispozici hd0 a fd0, takze to by zase naopak ukazovalo na zapnute L.SATA,ale v tom BIOSu to neni. Kdyz tam mam oba disky, tak je tam fd0 hd0 hd1, takze to vypada celkem v pohode. Ale at zadam hd0 nebo hd1 vzdy to bootuje z PATA.To je samozrejme naprosta blbost, protoze on tam ma LVM. Nemam s tim moc zkusenosti, tezko rict, jak to pujde zmenit, kazdopadne nejjednodussi bude asi nabootovat nejaky Rescue system z CDcek/DVD Fedory at si to opravi sama.
Jinak GRUB umi autocomplete, takze editaci commandliny, napsanim root ( a zmacknutim TAB se ukazou vsechny disky, napsanim treba hd0, a TAB se ukaze vypis partition. Cislo hdxxx hodne zalezi na BIOSu, jestli je nastaveny Legacy SATA mod nebo cisty SATA. (toto cislo se pak neshoduje s sda nebo hda napr.).
Jeste by zo mohlo mit neco spolecnyho s klonovanim pomoci Norton Ghost, ale nemelo by mit.
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Hehe jo sorry, prehlidl jsem se, myslel jsem, ze je tam napsano root=Ono je to blbost z ineho dovodu. boot= urcuje len to, kam sa ma LILO nainstalovat. Nijako to nesuvisi s bootovanim. Bootuje sa z toho, co sa posle jadru ako root= parameter.To je samozrejme naprosta blbost, protoze on tam ma LVM.
Jinak samozrejme u GRUBu je to uplne jinak, plati root (..) jak jsem psal
In a world without fences and walls, who needs Gates and Windows? | Nesnáším wide monitory.
Workstation: Xeon E3-1275v5 :: Silentmaxx TwinBlock fanless :: Fujitsu D3417-B :: 32 GB ECC DDR4 :: Radeon Pro WX 2100 fanless :: Dell UP2715K :: Gentoo
Server: Xeon E3-1245v6 :: Supermicro X11SSH-F :: 32 GB ECC DDR4 :: Aquantia 5GBase-T :: 36 TB storage :: Gentoo Hardened
Zatim se me ale stale nepodarilo to rozchodit
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Sorry, ze som ta zavadzal, som si myslel, ze grub sa konfiguruje vsade rovnako(skoro)... S LVM som sa este nestretol...
C2D 6750(2660MHz)@(3600MHz pri 1.41V ), 450x8(1.37V-real 1.39V full load),MSI P35 Neo2
, PQI 2x1GB DDR2 800MHz@900MHz 4-4-4-12,Saphire 3850 256MB, powered by EC 450W
PC2: AMD x2 5000+(250x13), MSI K9N-SLI PLATINUM, 2GB RAM 800@819, MSI GF 8600GT silent
Takze dneska jsem zkousel mountovat na hd0 /dev/sda1 coz je odnaceni disku, ale naprosto bezvysledne. Zkousel jsem ruzne veci v rescue, ale nikdy me to nenajde VolGroups
PC1. P4 Celeron Mobile 1,6@2656GHz, 2x1024MB DDR , ATI Radeon 9550, 2xWD 120JB, 2x17" LCD Benq FP737s, 7.1 sound + 7.1 repro, DVD, silent, 1GBit, TVCard FC6 PC2. P-III 1000@1200 MHz Tualatin, 1GB RAM, ATI Radeon 9000, Seagate 120GB 7200.9, CD-RW, 1Gbit super silent Kubuntu Notebook: Dell X300, Centrino 1400MHz Dothan, 1280MB RAM, Hitachi 80GB, BT, WiFi 1,2kg XP, FC6 Internet: 1x7MBit down, 1x2MBit up Sit: 1Gbit vnitrni sit
Toto téma si právě prohlíží 1 uživatelů. (0 registrovaných a 1 anonymních)
Pravidla přispívání
Odpověď s citací