MDK 10 a několik dotazů

[FlashedBrain]

Už mě to celkem slušně funguje, ale měl bych pár dotazů:

1) jak sestřelit zatuhlou aplikaci (konkrétně Tux Commander, který při kopírování souborů ze sítě stuhnul na "Připravuje seznam souborů", přitom MCčko ze bezproblémů kopíruje - možná xcípl na české windowsové znaky v názvech ).

edit. aha, třeba ve Sledování systému .

2) Zkouším tady vypálit nějaké audio CD z mp3ojek v k3b (na RWčko) a vždycky toskončí po "Starting writing" chybou "Error while decoding audio tracks" .
btw datové CD to vypálilo normálně

System
-----------------------
K3b Version: 0.11.6cvs
KDE Version: 3.2 BRANCH >= 20040204
QT Version:  3.2.3

cdrecord
-----------------------
scsidev: '/dev/ide/host0/bus1/target0/lun0/cd'
devname: '/dev/ide/host0/bus1/target0/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note&#58; Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note&#58; The author of cdrecord should not be bothered with problems in this version.
TOC Type&#58; 0 = CD-DA
Using libscg version 'schily-0.8'.
Driveropts&#58; 'burnfree'
atapi&#58; 1
Device type    &#58; Removable CD-ROM
Version        &#58; 0
Response Format&#58; 2
Capabilities   &#58; 
Vendor_info    &#58; 'TEAC    '
Identifikation &#58; 'CD-W524E        '
Revision       &#58; '1.0E'
Device seems to be&#58; Generic mmc CD-RW.
Current&#58; 0x000A
Profile&#58; 0x0008 
Profile&#58; 0x0009 
Profile&#58; 0x000A &#40;current&#41;
Using generic SCSI-3/mmc   CD-R/CD-RW driver &#40;mmc_cdr&#41;.
Driver flags   &#58; MMC-3 SWABAUDIO BURNFREE 
Supported modes&#58; TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size &#58; 1613472 = 1575 KB
FIFO size      &#58; 4194304 = 4096 KB
pregap1&#58; -1
Track 01&#58; audio   38 MB &#40;03&#58;48.05&#41; no preemp swab copy
Track 02&#58; audio   51 MB &#40;05&#58;05.69&#41; no preemp swab copy pregapsize&#58;   0
Track 03&#58; audio   47 MB &#40;04&#58;45.29&#41; no preemp swab copy pregapsize&#58;   0
Total size&#58;      137 MB &#40;13&#58;39.04&#41; = 61428 sectors
Lout start&#58;      138 MB &#40;13&#58;41/03&#41; = 61428 sectors
Current Secsize&#58; 2048
ATIP info from disk&#58;
  Indicated writing power&#58; 3
  Reference speed&#58; 6
  Is not unrestricted
  Is erasable
  Disk sub type&#58; High speed Rewritable &#40;CAV&#41; media &#40;1&#41;
  ATIP start of lead in&#58;  -11745 &#40;97&#58;25/30&#41;
  ATIP start of lead out&#58; 359848 &#40;79&#58;59/73&#41;
  1T speed low&#58;  4 1T speed high&#58; 10
  2T speed low&#58;  4 2T speed high&#58;  0 &#40;reserved val  6&#41;
  power mult factor&#58; 1 5
  recommended erase/write power&#58; 5
  A1 values&#58; 24 1A D8
  A2 values&#58; 26 B2 4A
Disk type&#58;    Phase change
Manuf. index&#58; 40
Manufacturer&#58; INFODISC Technology Co., Ltd.
Blocks total&#58; 359848 Blocks current&#58; 359848 Blocks remaining&#58; 298420
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord&#58; WARNING&#58; Drive returns wrong startsec &#40;0&#41; using -150
Writing pregap for track 1 at -150
Starting new track at sector&#58; 0
Track 01&#58;    0 of   38 MB written.
/usr/bin/cdrecord&#58; Success. write_g1&#58; scsi sendcmd&#58; no error
CDB&#58;  2A 00 00 00 00 00 00 00 1B 00
status&#58; 0x2 &#40;CHECK CONDITION&#41;
Sense Bytes&#58; 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00
Sense Key&#58; 0x4 Hardware Error, Segment 0
Sense Code&#58; 0x08 Qual 0x03 &#40;logical unit communication crc error &#40;ultra-dma/32&#41;&#41; Fru 0x0
Sense flags&#58; Blk 0 &#40;not valid&#41; 
resid&#58; 63504
cmd finished after 0.020s timeout 200s
/usr/bin/cdrecord&#58; A write error occured.
/usr/bin/cdrecord&#58; Please properly read the error message above.
write track data&#58; error after 0 bytes
Writing  time&#58;   28.659s
Average write speed  40.3x.
Fixating...
Fixating time&#58;    1.394s
/usr/bin/cdrecord&#58; fifo had 64 puts and 1 gets.
/usr/bin/cdrecord&#58; fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord comand&#58;
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/ide/host0/bus1/target0/lun0/cd speed=10 -dao driveropts=burnfree -eject -useinfo -pad -shorttrack -audio /tmp/kde-admin/k3b_audio_0_01.inf /tmp/kde-admin/k3b_audio_0_02.inf /tmp/kde-admin/k3b_audio_0_03.inf