Xorg

[Kaltas]

Potřeboval bych pomoc od místních linuxových guru...

Mám MacBook s 24" Dell (viz podpis) a rád bych z této kombinace dostal použitelný výstup... Nejraději bych aby se oba monitory daly vypínat a zapínat podle potřeby, tak že by na displeji MacBooku bylo rozlišení 1280x800 a na displeji Dellu 1920x1200. Teď mi to běží tak, že na Dellu je klonován displej MacBooku a přebírá i rozlišení (1280x800), což vypadá dost příšerně...

Můj xorg.conf:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"cz"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
	Driver		"intel"
	BusID		"PCI:0:2:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-64
	VertRefresh	43-60
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x800"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice     "stylus"	"SendCoreEvents"
	InputDevice     "cursor"	"SendCoreEvents"
	InputDevice     "eraser"	"SendCoreEvents"
	InputDevice	"Synaptics Touchpad"
EndSection

Section "DRI"
	Mode	0666
EndSection

[Jezevec]

Musis si pravdepodobne udelat dva monitory a dve graficky karty, respektive 2x sekce screen, monitor a device. Alespon takto mam vyreseno zobrazovani na TV+ monitor v rezimu "rozsireny" plochy. Ale je to Nvidia, mozna se intelacka grafarna chova jinak.

Az se dostanu dom, muzu ti tu nahodit konkretni reseni, ted se k tomu nedostanu.

Mimochodem, taky sem to mastil asi tejden, nez sem nasel pouzitelny reseni. Na netu je tuna informaci jak to nastavit ale 80% z toho nefunguje.

[Kaltas]

Díky za odpověď ... Nakonec jsem to vzdal po milionu pokusů a jedu čistě na Mac OS (a už bych neměnil)...

Na stolním PC mám Kubuntu a všechno bez problémů, takže od linuxu naštěstí nemusím odejít úplně ...