Radeon MOBILITY 9700

[andux]

Ako a odkial mam nainstalovat ovladace pre MOBILITY R9700? Ide mi aj o to, aby pri praci na baterku isla na mensi vykon - tak ako vo Windowsoch. Linux mam zatial iba tyzden, tak zatial do toho az tak nevidim

[Gargamel]

Napr. http://4um.ocguru.cz/viewtopic.php?t=83552

Neuvadis distribuci, takze nelze rict presne kroky, ale kazdopadne velka cast (i problemy) bude stejna. Ale stejne si myslim, ze fglrx ovladace jeste neumi dynamicky menit frekvence jadra podle stavu ACPI.

[andux]

Distribucii mam Kubuntu.... Skoda, ze to acpi nie je este doriesene - dost to setri baterku

[Gargamel]

Distribucii mam Kubuntu.... Skoda, ze to acpi nie je este doriesene - dost to setri baterku

Nevim jak je to v Ubuntu, ale minimalne v Debianu fglrx ovladace v baliku nejsou a ani nebudou. Zkus mrknout nekam do googlu, ale vypada to, ze si ty ovladace budes muset docela slozite nainstalovat sam.

ACPI v Linuxu docela i funguje (kdyz se postesti), ale grafika je oddelena vec, ktera pravdepodobne nejde nijak regulovat primo.

[Dr Meduza]

Ubuntu by melo mit balik na ATI (myslim ze sem tam neco takyho videl kdyz sem to trochu zkoumal minimalne na NV maj)

[andux]

aby som to tu uzavrel, keby to este niekto potreboval. V ubuntu je balik fglrx a bez problemov facha.

[David Jaša]

aby som to tu uzavrel, keby to este niekto potreboval. V ubuntu je balik fglrx a bez problemov facha.

All: používáte-li distribuční jádra, najdete tyto non-free ovladače v balíku linux-restricted-modules-verze_jádra:

$ apt-cache show linux-restricted-modules-2.6.12-7-686
Package: linux-restricted-modules-2.6.12-7-686
Priority: optional
Section: restricted/misc
Installed-Size: 13520
Maintainer&#58; Daniel Stone <daniel.stone@ubuntu.com>
Architecture&#58; i386
Source&#58; linux-restricted-modules-2.6.12
Version&#58; 2.6.12.2-5
Provides&#58; nvidia-kernel-1.0.7667
Depends&#58; linux-image-2.6.12-7-686, linux-restricted-modules-common &#40;>= 2.6.12.1-7&#41;, module-init-tools, nvidia-kernel-common
Suggests&#58; nvidia-glx, avm-fritz-firmware-2.6.12-7
Filename&#58; pool/restricted/l/linux-restricted-modules-2.6.12/linux-restricted-modules-2.6.12-7-686_2.6.12.2-5_i386.deb
Size&#58; 5199040
MD5sum&#58; 5019d8c85446afa0741c05aee1374dbd
Description&#58; Non-free Linux 2.6.12 modules on PPro/Celeron/PII/PIII/PIV
 This package provides restricted modules for Linux version 2.6.12 on
 Pentium Pro/Celeron/Pentium II/Pentium III/Pentium IV.
 Currently the following modules are included&#58;
  - madwifi &#40;Atheros&#41;
  - fglrx &#40;ATI&#41;
  - nvidia
  - fcdsl, fcdsl2, fcdslsl, fcdslslusb, fcdslusb, fcdslusb2, fcdslusba,
    fcpci, fcpcmcia, fcpcmcia_cs, fcusb, fxusb &#40;AVM ISDN&#41;
  - ltmodem &#40;Winmodem&#41;
 .
 These modules are "restricted" because they are not available under a
 completely Free licence.
Bugs&#58; mailto&#58;ubuntu-users@lists.ubuntu.com
Origin&#58; Ubuntu

Nicméně pokud používáte vlastnoručně kompilovaná jádra, tak si ty moduly musíte samozřejmě nainstalovat sami. Takto jsem instaloval ovladače od nvidie a šly bez problémů.

[Wizzard]

Mám taký drobný problém. Konečne sa mi podarilo rozbehať OpenGL v Kubuntu Breezy, až na to, že pri použití ovládača fglrx je všetko strašne svetlé, akoby gamma bola nastavená na 10 alebo viac, a ešte k tomu, farby sú nerovnomerne zosvetlené. Nastavenie gammy v XWindows nemá takmer žiadny účinok, teda bude to asi potrebné nastaviť niekde v xorf.conf.
Ak by mal niekto nejaký nápad, bol by som mu dosť povďačný.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/CID"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. Radeon 9200 (RV280)"
	Driver		"fglrx"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"EIZO FlexSca"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. Radeon 9200 (RV280)"
	Monitor		"EIZO FlexSca"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

[Dr Meduza]

a zkouusel si to nastavit ve FIREGLCONTROLPANEL ?

[Wizzard]

a zkouusel si to nastavit ve FIREGLCONTROLPANEL ?

Jop, to vôbec nepomáha, niečo sa pri nastavovaní mení, ale ten obraz je taký svetlý, že je to zbytočné, napríklad niektoré svetlejšie odtiene modrej, červenej alebo zelenej sú úplne biele a obraz je teraz celkom znehodnotený.