mplayer pada - uz neresit.

[KtK]

mam problemek s mplayerem - pokazdy kdyz se pokusim prehrat film dopadne to nejak takhle: (je to pusteny s prepinacem -v aby to bylo ukecanejsi)

using Xvideo port 69 for hw scaling
X11 error: BadAccess (attempt to access private resource denied)
Type: 0, display: 86ffd38, resourceid: e00006, serial: 48
Error code: a, request code: 93, minor code: 1

HW je ati rage 128, distro je debian sarge. na MDK to na stejnem HW jezdilo bez problemu. Dela to verze 0.9neco, 1.05pre i tejden stara 1.06pre.

jinak -bo help vypise toto:

        xv      X11/Xv
        x11     X11 ( XImage/Shm )
        xover   General X11 driver for overlay capable video output drivers
        dga     DGA ( Direct Graphic Access V2.0 )
        fbdev   Framebuffer Device
        fbdev2  Framebuffer Device
        vesa    VESA VBE 2.0 video output
        xvidix  X11 (VIDIX)
        cvidix  console VIDIX
        null    Null video output
        mpegpes Mpeg-PES to DVB card
        yuv4mpeg        yuv4mpeg output for mjpegtools
        png     PNG file
        tga     Targa output
        pnm     PPM/PGM/PGMYUV file
        md5sum  md5sum of each frame

jediny co funguje je x11 (neumi pri fs roztahnout obraz jinak nez -zoom -coz je nekoukatelne trhane, a pak snad jeste dga, coz je taky strasne)

verze Xek:

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 fabbione @ fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]

ovsem jadro je 2.4.27, tak nevim, jestli to treba nevadi..?

zkousel jsem delat vsechno mozny, vcetne kompilace jinym gcc, vysledek porad stejny..

[fish]

mplayer nema problemy - problem mas s Xfree/Xorg.
Xfree nevie spolupracovat s hardware karty.
pozri sa ci sa ti natahuje modul dri v konfiguraku XFree86

Section "Module"
...
Load "dri"
EndSection

Druha vec - treba zabezpecit pristup k dri pre non-root userov

Section "DRI"
Group 0
Mode 0666
EndSection

Ak nebude modul dri pre tvoju kartu (neviem co tam ma debian - distribucie manrake/redhat pouzivaju patche z dri.sf.net) mas moznosti:
- novsi xfree/xorg
- pridat dri modul z dri.sf.net
- pridat gatos modul z gatos.sf.net

[KtK]

tak dri v xf86configu uz mam, (nemel jsem tam ty prava pro nonroota) ale porad to same jinak:

ktk@ktk-debian:~$ cat /var/log/XFree86.0.log | grep EE
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) Failed to load module "pex5" (module does not exist, 0)
(EE) Failed to load module "xie" (module does not exist, 0)
(EE) R128(0): No DFP detected
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took j = 0

pro zajimavost jeste dodam xf86config: (spoustu komentaru jsem odmazal..)

ktk@ktk-debian:~$ cat /etc/X11/XF86Config-4
Section "Module"

    Load        "GLcore"
    Load        "bitmap"
    Load        "dbe"   # Double buffer extension
    Load        "ddc"
    Load        "dri"
    Load        "extmod"
    Load        "glx"
    Load        "int10"
    Load        "pex5"
    Load        "record"
    Load        "speedo"
    Load        "vbe"
    Load        "xie"

    Load        "type1"
    Load        "freetype"

EndSection

Section "DRI"
    Group 0
    Mode 0666
EndSection


Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"


    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

Section "ServerFlags"

EndSection


Section "InputDevice"

    Identifier  "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat" "500 30"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc104"
    Option "XkbLayout"  "us"
    Option "XkbOptions" "grp:alt_shift_toggle"

EndSection


Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option              "Emulate3Buttons"       "true"
    Option              "ZAxisMapping"          "4 5"


EndSection


Section "Monitor"

    Identifier  "muj monitor"

    HorizSync   31.5 - 57.0

    VertRefresh 50-90

EndSection


Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

    Driver     "vga"
EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "atina"
    Driver      "ati"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier  "Screen 1"
    Device      "atina"
    Monitor     "muj monitor"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
#       Modes       "640x480" "800x600" "1024x768" "1280x1024"
        Modes       "1152x864" "1024x768" "1280x1024"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"


    Screen "Screen 1"


    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

[fish]

Ja mam uz Xorg (Fedora Core) preto presne ti neporadim ale:
- x.org aj xfree86 radia pre niektore typy rage 128 driver "r128" nie "ati" skus ci ti pojde (pozri sa na http://www.xfree86.org/4.3.0/r1285.html )
Driver "ati" je skor urceny pre ATI mach64 a prve typy ATI rage chipov.

[KtK]

tak vymena driveru taky nepomohla zacinam zvazovat reinstalaci :/

[tosuja]

Reinstalace pri drobne chybe v X? NAPROSTO zbytecne. Temer urcite ti bude stacit ze sekce DRI vykopat "Group 0" (tezko existuje skupina s takovym jmenem, cislo je pro skupinu root, coz taky nechces).

Mam pocit, ze bez problemu pro ATI karty bylo pouzivat xvidix misto xv. Jinak bych byt tebou vykopal cast modulu X, ktere se nahravaji (nejspis nebudes potrebovat xie, pex5, speedo). neni to nutne, ale neuskodi to.

[KtK]

pozde..
jinak nefungovalo to ani pod rootem, ani s xvidixem.
ovsem uznavam, ze reinstalovat kvyli tomu system je lamerina..

[Gargamel]

Hehe s DRI nema XVideo naprosto nic spolecnyho a nema na to vliv. Zkus si pustit xvinfo, co ti to vypise, mel bys tam mit podporu YUV2 nebo cosi takoveho. Jinak zkontroluj rozliseni, zmen barevnou hloubku, treba mas malo pameti na karte.

V mplayeru by ti to pres SDL melo jet taky, ikdyz ten tusim vyuziva xv zrovna.

[KtK]

hosi, uz je pozde, ten linux uz neni.. jestli pujde okolo admin, necht to klidne zamkne.