Problem nejspis s DMA :( ? Vyreseno

[Lipo]

Pri booto systemu se me ukazujou tyto hesla :
ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdcio, hddMA
hda: ST380021A, ATA DISK drive
hdb: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: WDC AC2850F, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: DMA disabled
ide0: reset: success
hda1 hda2 hda3
hdd: max request size: 128KiB
hdd: 1667232 sectors (853 MB) w/64KiB Cache, CHS=1654/16/63, DMA
hdd: hdd1 hdd2


Vadi me tam to error koukal jsem jestli neni neco spatne v jadru nastaveyho ale prisel jsem na dve veci

Use multi-mode by default [ ] a to zaskrtnu jak koliv tak to nema vliv je tam o techto errorech nejaka zminka
a dalsi polozka
Use PCI DMA by default when available [] na to vliv jiz ma ale kdyz ji vypnu tak max kopirovaci rychlost 2mb kdyz ji zapnu tak kolem 12 ale pise to ty errory nevite nekdo co stim ?

Jo jadro mam 2.6.6-rc2 ale delalo mi to i u 2.6.5 2.6.3 a 2.4.22 .

[Rainbow]

Vyskusaj odpojit ten Lite-On.

[Lipo]

Pomohlo to diky moc

[Rainbow]

Tak to nejako poprehadzuj, v niektorej kombinacii by to mohlo chodit
Osobne to mam takto:
Primary master WD300BB
Primary slave WD AC21200
Secondary master WD400BB
Secondary slave Accesstek CRW4001 (akoze MSI MS-8340S)