Velmi šikovná záležitost,řeší např. velmi jednoduše refresh rate pod OpenGL atd...
Jednodušší nastavení ovladačů snad už ani není možné :wink: .
http://www.radeon2.ru/atitray/attsetup.exe
http://volny.cz/mildam/atitray.jpg
Printable View
Velmi šikovná záležitost,řeší např. velmi jednoduše refresh rate pod OpenGL atd...
Jednodušší nastavení ovladačů snad už ani není možné :wink: .
http://www.radeon2.ru/atitray/attsetup.exe
http://volny.cz/mildam/atitray.jpg
aa hned to sosam a zkousim :wink:
edit:tak uz to mam-vypada to fajnove,konecne si muzu rychlet menit vyhlazovni a anizo dle potreby..jeste pak testnu ty obnovovaci frekvence...
Neinstaluje se,vytvoříš složku do které rozbalíš,a v options pak už jen "load with windows".Citace:
Původně odeslal Wolferine
Ještě jsem nevyzkoušel profily.
na to ze se neinstaluej sem uz prisel :wink:
mno etd si s tim hrat nebudu,sem nemocnej tak si zas pudu na chvili lehnout :-(
ATI Tray Tool v.1.0.0.205 - http://www.radeon2.ru/atitray/atitray.rar
Nyní ve verzi 1.0.0.220
Přidány volby - DMA Copy,Block Write
http://www.radeon2.ru/atitray/attsetup.exe
http://www.radeon2.ru/atitray/atitray.jpg
Tato verze má již instalátor...
.... hele .. toe docea good .. musim rict :-)
no ten pixel shader 2.1 jsem nějak nepochopil :-o ale nastavený ho mám :lol:
super tohle mi chybělo....rychlá změna AA+AF a další vychytávky hned "po ruce"
EDIT: je možný že si to nerozumí s Omegama? něco změnim a koukam do panelu a jako by se nic nestalo
Mám to na Omegách,a vše je tak jak má být.Pravda je to,že rychleji nastavené ovladače s možností profilů jsem zatím nevidělCitace:
Původně odeslal susman
:arrow: http://www.volny.cz/mildam/AtiTray.JPG
jo chodí to ale konkrétně AA+AF se mi aktivuje akorát se to neukáže v control panelu
Pani keď tak nad tým rozmýšlam na čo je dobra tato utilita ?Je tam kopu nastaveni väčšinou su aj v normalnom CP.
Otázka mam 9100 radeonka ako by bolo vhodne vyladiť tuto karty pomocou nastaveniami čo su v totmo softíku ?
Nová verze ATI Tray Tool v1.0.0.228 http://www.radeon2.ru/atitray/attsetup.exe
- optimalizovaná pro Cat4.3
Dále ještě nová verze RadLinker1005 http://www.radlinker.com/RadLinker1005.zip
- Fixed a crash in Explorer when running a custom profile after logging off.
- Added a selection for removing a custom profile.
- Settings should now match up with the Catalyst 4.2/4.3 control panel.
- Fixed errors with Steam.
- Fixed application FSAA setting
- Added Spanish and French language translations.
- Fixed process priority setting.
Verze 290 umožňuje např. "Temporal anti-aliasing"....
1.0.0.290
+ Minor bug fixes
+ Improved PCI Scan procedure
+ Updates plugins API
+ Added support for Direct3D Anisotropic Filtering Optimization
(Can improve speed up to 10-15% without significant losing quality. This mode
can give better quality than standard "Performance" mode)
+ Added support for Direct3D Trilinear Filtering Optimization
+ Added support for Direct3D Temporal Antialiasing
+ Now you can limit clocks for Overclocking using atitray.ini file.
+ Added support for HYDRAVISION
http://www.radeon2.ru/atitray/attsetup.exe
Navíc je tu k Radlinker v 1008!
New in this release:
New look.
Added support for 33 new graphics boards. What could they be???
Added support for Temporal Anti-Aliasing (DirectX mode only).
Added Italian language library.
http://users.adelphia.net/~webspace/RadLinker1008.zip
v.1.0.0.300 přidáno několik vylepšení.....
http://www.radeon2.ru/atitray/attsetup.exe
Dnes již ve verzi Ati Tray Tools 1.0.0.309
1.0.0.307
+ Fixed bug, which in some cases prevent windows from restarting/shutdown. This bug first time
appeared in build 303.
1.0.0.305
+ Added option to check for new version in internet
+ Fixed some bugs with dialog box positions
1.0.0.303
+ Updated Games Profiles. Now you can specify two different overclocking profiles.
One to load before start game and second one, after game ends.
+ Added options to create shortcut on desktop for Game Profiles.
+ Fixed bug with OpenGL dialog window and Force Z Buffer Depth
1.0.0.300
+ Added support for Game Profiles
+ Fixed bug with grayed menu items for D3D/OGL profiles at first run. (When no profiles available and
you create new one, Direct3D and OpenGL Profiles menu still grayed)
Ati Tray Tools 1.0.0.319
1.0.0.319
+ Improved Game profiles support
+ Changed some internal codes
1.0.0.317
+ Improved plugins support, added some new functions to Plug-Ins API
+ New plugin added. Radeon Information. Gives general information about Radeon Cards like:
- Installed Memory Size
- Memory Type (SDRAM/DDR/DDR2)
- Memory Width (64bit/128/256)
- Rendering Pipelines count
+ Added support for RADEON X800 Series
+ Updated Game Profiles. Now you can use new option to restore previous setting for D3D/OGL after game ends.
1.0.0.314
+ Improved desktop shortcuts support
+ Fixed bug with loosing focus by games, which ran from desktop shortcuts.
1.0.0.312
+ Added support for AF mode with full Trilinear Filtering. Catalyst driver by default enable Trilinear
filtering only on 0 stage textures. By enabling this mode, you will receive true Trilinear filtering
on all texture stages.
+ Icon positions on desktop now will be restored after applying Direct3D settings.
[/url]
Ati Tray Tools 1.0.0.323
1.0.0.323
+ A few bugs fixed
+ Added information about current clocks to hint for tray icon.
1.0.0.322
+ Added support to turn on/off Pixel Shader Code optimization
+ Added profiles backup option
+ Optimizing code
+ Added options for Hyper Z
(I assume (at less for RV3xx), that all options for HyperZ modes are enabled by default,
even if there are no such values in registry. Use these settings for
testing purpose. You can always return all settings to default (for
Catalyst) state by clicking on "Reset to default" option.)
+ Updated installation procedure. Now ATI Tray Tools will be closed automaticaly when installing
over old version.
+ Added options in atitray.ini file to hide some menus on startup
hide_ogl=0 ;if 1 all OpenGL menus will be hidden
hide_d3d=0 ;if 1 all Direct3D menus will be hidden
hide_tweaks=0 ;if 1 all tweaks menus will be hidden
Ati Tray Tools 1.0.0.330
1.0.0.330
+ Minor bug fixes
+ Improved Game Profiles. Now ATI Tray Tools can automatically detect started application and if executable file will be found in the list of Game Profiles, will load corresponding settings like D3D/OGl and overclocking settings. Now there are no needs to create Shortcuts for Game Profiles. Just register an application in "Game Profiles" menu. You can switch this mode Off, just uncheck "Auto Detect Starting Games" located in "Game Profiles" menu.
1.0.0.327
+ Fixed bug when secondary monitors turns off when applying D3D Settings
+ Updated Reset Display procedure.
+ Improved Refresh Lock
1.0.0.325
+ "Options" menu renamed to "Tools" and now have option to Save and Restore Icons position
+ Added Refresh Lock system with ability to set separate refresh rates for each resolution.
Mám s tím malé problémy - při podržení kurzoru na ikonce tohoto prográmku se mimo jiné zobrazuje taktování, u mě ale to jednou je a podruhé tam jsou nuly a u " ovrclocking " to píše " eror ".Nevíte proč ?
Ati Tray Tools 1.0.0.333
1.0.0.333
+ Fixed bug when setting OGL Trilinear Option
+ Fixed bug with restoring previous settings for d3d/ogl after game finished.
1.0.0.332
+ Changes in Game Profiles. Added new filed for Game Parameters. Now if you register game with some comand line parameters, please put parameters in "Parameters" edit box.
+ Fixed bug with shotcuts for game pofiles used in new mode. (Autodetect mode doesn't need any specialy created shortcuts for games anymore)
+ Updated installation package. Now you can select between full and custom installation types. In Custom mode you can disable autostart ATT with windiws and creating any shortcuts in Start Menu
1.0.0.335
+ If you have version less than 1.0.0.333, you must manualy uninstall ATI Tray Tools and restart computer before install this build.
+ Added support for changing resolutions. Click left mouse button on Icon in tray area and select resolution.
Ati Tray Tools 1.0.0.338
1.0.0.336
+ Updated Game Pofile Name creation and fixed bug with creating shotrcuts. Now these chars / \ ? | " * < >, withh be replased with underscope _. BTW. Starting from build 330, ATT can automaticaly detect started game, so you should not create any shortcuts, until you use "Auto Detect Starting Games" option.
1.0.0.338
+ Updated Quick Resolution option. Now you can disable for frequency asking dialog and disable wait for 10 seconds before applying selected screen resolution. Add 3 variables in atitray.ini in section [resolutions].
dont_ask_rate=0 - if set 1 ATT will not ask to select refresh rate
select_max_refresh=0 - if set to 1 ATT will select maximum posible refresh rate for selected screen resolution, if dont_ask_rate=0, ATT will ignore this value
dont_wait=0 - if 1, ATT will not wait 10 seconds until apply selected screen resolution
Na první pohled ty TT vypadají celkem dobře. Podle funkcí by to mohlo nahradit PowerStrip. Ale teď to nemužu vyzkoušet, protože mám monitor v opravě :-(
ATI Tray Tools 1.0.0.352
1.0.0.352
+ Timings now can be included in overclocking profiles.
+ Added option to associate color profile with Game Profile.
+ Added variable in atitray.ini to hide timings pages. (hide_timings)
+ Added confirmation dialog to replace profile, if profile with the same name already exists.
+ Added hot key Alt+R in Timing pages to reset timings.
+ Fixed bugs with Game Profile editing.
+ If ResfreLock enabled ATT will not ask for refresh rate when changing resolution.
+ Timings now dissabled for X800 series. Until I find more information.
+ Added support for X800 Platinum Edition
1.0.0.345
+ Fixed bug with "Support DXT Textures" option. If you have problems with textures in games just after installing ATT, please check "Support DXT Textures" option in Direct3D, and if it's off, turn it on.
+ Updated Hot Keys. Now some of hot keys (Load d3d/ogl profiles) will not work while you play any games, registered in ATT game profiles. Functionality will be restored after game finished.
1.0.0.344
+ Now tray Icon will be recreated automatically if explorer crashes
+ Added Hot Keys system with abilities:
Load profiles Direct3D/OpenGL/Overclocking
Run any applications
Work with colors (gamma/brightness/contrast)
Load any Color Profile
Reset Colors
+ Anisotropic Filtering Optimization and Trilinear Filtering Optimization now moved to standard Direct3D settings and can be included in Direct3D profiles.
+ Added hardware low level color correction with profiles. All Color values always will be resets after any screen resolution changes.
+ Fixed compatible issue with Trend Micro Internet Security.
+ Fixed bug with overclocking profile when profile can not be deleted.
+ Renamed uninstall key name to disable ATI Uninstaller to uninstall ATI Tray Tools together with other ATI Software.
+ Internal changes in Shell Notify Icon procedure.
+ Fixed Quick Resolution bug.
Hlavne ten bug s texturama me dostal... Sem si myslel, ze mi odesla karta a pritom takovahle blbost... :roll:
*EDIT*
A mame tu dalsi verzi... tentokrat 1.0.0.352
1.0.1.358 + Added "Artifact Tester" with ability to find maximum values for GPU and MEM. Including an option to heat up main CPU, to simulate game environment.
- Be notified, that procedure to find real maximum clocks is not as simple as you can think. It is a very huge job and I never will create such options in ATI Tray Tools. The given procedure is intended to find clock, when no artifact detected during given time, while rendering a simple scene. (The space ship have about 26 000 triangles.). So it is up to you, how to use this Tester. 8-)
+ Added new Hardware Window. Now you can control PCI Lantency timer for your video card. Automaticaly apply value on start up and restore it after suspend/hibernate modes.
+ Added context sensitive help file (English version)
+ Improved installation. Now you can select Program Menu folder to shortcuts. When installing new version over previous one, new installation will automatically take path for Program Menu from old installation, and use it.
http://www.radeon2.ru/atitray/
1.0.0.362
+ Now timings can be loaded at start up. You must select which profile will be loaded at start up time, insteed of selecting clocks values.
+ Added 2 new hot keys , very usefull for mobile computer users. Will work on desktop system only if your monitor support this interface.
- Turn Monitor Off
- Turn Monitor On
+ Now color settings will not be reset if you change resolution
+ Added option to automaticaly overclock your card if any application required 3D Api (OpenGL/Direct3D)
How it works.
If you enable 2d/3d overclocking you must set which profile shoukd be loaded when application enter 3d mode and which profile load after this application finished. ATT some times can not detect when game use 3d mode. If you find such kind of game, create profile for it.
Also you can create the list of application which should be excluded from auto 2d/3d detecting. Some of the applications already excluded internaly by ATT and never will be monitored.
explorer.exe
atitray.exe
atitool.exe
nvmixer.exe
+ Changes in game profiles
For Game profiles now you can set 3 options:
1. Take no action - ATT will do nothing even if you enable 2d/3d overclocking and game use 3d mode.
2. Custom overclocking - If you set this option ATT will use overclocking profile you provided for this game only. even if 2d/3d overclocking is enabled.
3. Use auto 2d/3d - This option tells ATT to use global 2d/3d profiles. This option has no effect if you disable 2d/3d overclocking. But if you set this option (with global 2d/3d detection enabled) and your application does not require 3D mode, 3D profile anyway will be loaded.
+ Screensave will be disabled while 3D Render window is active.
- Removed "Autodetect Starting Games". Now this option is part of auto 2d/3d overclocking and always ON. It can not be disabled.
- Removed "With CPU Heat" function from Artifact tester. Now tester itself can heat main CPU.
http://www.radeon2.ru/atitray/
1.0.1.370
Updated Plug-Ins API. Added Run Time type plug-ins. These plugins will be executed at ATT start up.
Added PCI Register Set plug-in. Using this plugin, you can create list of PCI registers, which will be programmed at start-up. Also these registers will be restored after suspend/hibernate mode. Useful for setting BUS Disconnect on/off on motherboards without such option in bios.
Added CPU Load metter plugin with full source as example of "How to create Run time plugins and show information in system tray".
Updated Radeon Info plug-in.
Updated Games Profiles. Added option to close ATT after game end. But be careful and don't ask me if you got an error! If you set as game executable an loader, not the game itself, and this loader will be terminated after game start, ATT will be terminated too! Just remember. ATI Tray Tools will monitor .exe file provided as Game Executable!
Added option to load color profile at start up.
Fixed bug with TemporalAA in OpenGL configuration form.
Added OEM settings. (If you want to include ATT in your software/drivers package, please contact me first! I will provide more information)
http://www.radeon2.ru/atitray/
Tak to vypadá velice dobře, eště líp jak ATITool :).
Hned to du nasosnout :-)
Ati Tray Tools 1.0.1.380
+ Fixed bug when in some cases ATT unable to start low level driver even after reinstall.
+ Added full support for "ATI Control Center".
Now ATT can operate in two modes. Old mode and New Control Center Mode. The new Mode will be automaticaly activated if Control Center is installed. The difference between these two modes are:
-In new mode separate settings for d3d/ogl are removed. Added single 3D option.
-In Game Profiles now you will choice only sinlge 3D profile for both Direct3D and OpenGL games.
+ Removed "Radeon Information" plugins. Now you can use internal System Information, located in "Hardware->System Information" menu.
+ Added support for Catalyst AI.
Ati Tray Tools 1.0.1.382
1.0.1.382
+ Fixed bug when in some cases ATT unable to start low level driver even after reinstall.
+ Added full support for "ATI Control Center".
Now ATT can operate in two modes. Old mode and New Control Center Mode. The new Mode will be automaticaly activated if Control Center is installed. The difference between these two modes are:
-In new mode separate settings for d3d/ogl are removed. Added single 3D option.
-In Game Profiles now you will choice only sinlge 3D profile for both Direct3D and OpenGL games.
+ Removed "Radeon Information" plugins. Now you can use internal System Information, located in "Hardware->System Information" menu.
+ Added support for Catalyst AI.
Ati Tray Tools 1.0.1.386
1.0.1.386
+ Added support for Radeon X700 Series
+ Added Memory Timing Editor for X800/X700 Series
+ Added support for Geometry Instancing option. (Look in Tweaks section)
+ Updated Low Level driver. Also changed name from rvxedit.sys to atitray.sys
+ Extended Game Profiles. Added option to switch desktop resolution before starting game.
+ Fixed bug when desktop gamma resets to default after game end.
+ Fixed bug when ATT can not restore overclocking profile after game end.
Ati Tray Tools 1.0.1.400
1.0.1.400
+ Added TV Out support (test mode). Look in Display->Settings. You can adjust all properties for TV Out including Contrast, Color Saturation, Screen Position, Flicker Removal, TV Format and much more. Also added support for Theater Modes. All these can be included in profiles.
+ Added new memory timings.
+ Added Display Rotation support.
+ Added new hot keys.
: Increase Master Volume
: Decrease Master Volume
: Mute/Unmute Master Volume
: Rotate display to 0
: Rotate display to rigth 90
: Rotate display to 180
: Rotate display to left 90
: Switch between display rotation (0 and 180)
: Set Default Single Display Profile
: Load Display Profile
: Start Audio Recorder
: Stop Audio Recorder
+ Improved overclocking procedure. Now ATT can work in two modes.
1. (Default) High precision. In this mode reference divider will be calculated by ATT to archive best accuracy.
2. Low precision. In this mode ATT will use BIOS default reference divider and calculate only GPU/MEM feedback dividers. If you have problems with Default method, try to use Low precision mode.
+ Default button in Overclocking window, now uses BIOS reference divider to set default BIOS clocks.
+ Now Desktop Colors will be restored after game end.
+ Fixed bug with missed buttons to load WAV file for 2d/3d auto detection.
+ Improved artifact scanning procedure for r4xx series.
+ Added new tool. Audio Recorder. Using this tool you can record music during playing games. Audio Recorder will automatically create file names like "Untitled[xxx].wav", where xxx is auto incremented number starting from 0. If file with the same number is exists, Audio Recorder will create file with higher number.
To ensure you recording from right source, check mixer record settings before using this tool
Ati Tray Tools 1.0.1.500
1.0.1.500 (January 27, 2005)
+ Added Support for last Radeon models
+ Experimental support for Windows XP 64bit/ 2003 64bit.
+ Improved TV/Display support, updated "Default Single Display" profile.
+ Updated Display information. Now "Displays" dialog window will show DDC information for monitor if supported.
+ All registry operation for Catalyst settings are moved to low level driver. Now you can use ATI Tray Tools under standard user or guest accounts (without administration rights). Please restart computer after installing this build.
+ To provide easy operation with Low Level driver I've added new utility "Low Level Driver Installation".
Now you can easily Start/Stop/Install/Uninstall driver.
+ Improved 3D Renderer. Now you can resize 3D Renderer window. The bigger window the better chances for finding maximum clocks.
+ Added option to set minimum allowed artifacts count.
+ Added new options in 3D rendered
"Set 3D to max quality". - If you select this option ATT will
automatically set all 3D settings to maximum quality. Antialiasing - 6x, Anisotropic Filtering - 16x,
"Set 3D to max speed". - If you select this option ATT will
automatically set all 3D settings to maximum speed. Antialiasing - 0x, Anisotropic Filtering - 0x,
+ Update artifact scanning procedure. Now 3D Renderer will show amount of artifacts.
+ Updated System Information module. Added information about Sub Vendor.
+ Updated "High precision" overclocking mode. Now you can set restriction for reference divider calculation.
How it will work:
By default ATT, in High precision mode, calculate best reference divider, set nearest desired clocks using range between 2 and 16. Sometimes the bigger divider gives most desired clocks, but use of bigger divider is a way to unstable overclocking. You can reach better overclocking values with better stability using smaller dividers, but in this case you will not be able to set accurate clocks.
You can use "Calculate" button to see which of the dividers will be used for obtaining desired clocks.
Just for example we want to set GPU of 380Mhz and Memory of 340 MHz. Lets have a look which clocks we will have with different restrictions:
Clocks : Restriction : Calculated Divider :Total Difference in MHz (GPU+Mem)
379.80/340.20 16 15 0.40
380.25/339.75 14 12 0.50
380.70/340.20 11 10 0.50
381.00/339.00 9 9 2.00
381.38/340.88 8 8 2.26
378.00/339.43 7 7 2.43
382.50/337.50 6 6 5.00
and so on. As you can see small difference is achieved using higher "Calculated Divider". So if you want to have accurate clocks you should increase restriction or if it doesn't matter you can use lower restriction.
+ Added hot key to reset display driver
+ Added new module "Monitor Graphs", at this moment you can control speed of GPU/Memory,
GPU/Env Temperatures, FAN Speed and Main CPU Usage. With option to create log files and export history to TXT/CSV/BMP files at any time.
For ASUS Boards (with FinTek monitoring chip) the value of FAN Speed can be wrong if chip sets to operate in manual mode (using ASUS SmartDoctor for example).
History capacity is up to 20 000 records.
Automatic display of minimum and maximum values.
Be informed, when computer go to the suspend/hibernate state, with opened Monitoring Window, ATT automatically close it.
+ Added "Hardware Monitoring" module. Using this module you can put GPU or Environment temperature to system tray.
+ Added option to dump current Video BIOS to file (experimental mode). Only for Radeon 9500 and up.
+ Added option to show current assigned hotkeys in "General Settings" dialog box for Audio Recorder and ScreenShot maker.
+ Added FAN Control to "Overclocking Module". Can be included into overclocking profiles. ASUS boards (9600XT/9800XT) with FinTek monitor chip are not supported yet.
+ Added 2 new hot keys to operate with FAN Speed.
- Set FAN to auto speed
- Set FAN to manual (desired) speed
+ Changes in Overclocking Window. Now when you run "Find Max GPU" or "Find max Mem" procedures, some of controls on overclocking window will be disabled.
+ Now if you close ATT manually default clocks for GPU/Mem will be applied.
+ Added confirmation message to "Save icon positions".
+ Fixed bug with OpenGL MipMap and LODBias settings when both of them after reinstallation of Catalyst driver were reset to High Speed instead of High Quality.
+ Fixed some interface bugs.
+ Fixed MMC applications detection routine.
+ Fixed bug with Display profiles when Overscan mode were no saved to profile.
+ Fixed bug when ScreenShot system unable to make screen shot with Primary Monitor attached to second DVI port.
Ty nové Ati Tray vypadají skvěle. Jěště, kdyby tak vvšechny ty nové funkce fungovaly! Např. to automatické přetaktování při přechodu z 2D na 3D a naopak mi nefunguje. Funguje to někomu?
funguje bez problemu, v teto verzi je ale zas nejaky divny artifact tester,haze me to chyby pri jakekoliv frekvenci hmmCitace:
Původně odeslal Matio
No úplně bez problémů to není, mě to nefunguje. A ten Artifact tester mi zase na rozdíl od tebe funguje dobře... Dívné.
Je to super program, vsem doporucuju. Zatim jsem nemel zadny problem.
no program cool artifact tester je great... ale ten automatickej OC mě nefachá jak ste to nastavili? prostě ste si tam nahodili + a daly si tam například hry? a fungovalo vám to?
Dnes již ve verzi - Ati Tray Tools 1.0.2.600
1.0.2.600 (April 17, 2005)
* Improved 3D detection.
* Now ATT will not try to monitor application which was started from Windows folder.
* Fixed error in "DCC Configuration" window when "Override Display Limits" options becomes grayed if monitor doesn't support DDC.
* Fixed bug with display rotation assigned to hot keys.
+ Added support for Smart Shaders effects. A few custom shaders included in installation package. Look in "Smart Shaders" folder.
* Upgraded "Game Profiles" module. Now you can set individual 3D setting for game.
+ Added "Edit" button near 3D profiles selection to easy change settings in 3D profile without closing "Game Profiles" window.
+ Added "Play" button in "Auto 2d/3d" module for fast playing selected .wav file.
+ Added option to select type of font to draw FPS value
* Standard - fastest font
* Digits - fast font
+ Added support for Direct3D 8/Direct3D 9 games in OSD Module (FPS and FlashOSD).
+ Added new Flash OSD fields.
"Free Texture Memory (D3D)". - This field will show free Texture Memory. Texture memory is calculated as sum of on board video memory plus AGP Memory.
"Show 3D API Type" - This field will show used 3D API in game. (OGL/D3D8/D3D9)
"System Memory Used by process" - Show how much system memory currently used by application.
All fields in FlashOSD updated one time per second but be careful it can sometimes slow down a bit your game if you select "Show all times" mode. Because in this mode, your video board will make additional job to render all characters in FlashOSD strings every frame.
* Changed behavior of FPS meter. Now it can be hidden.
+ Added new hot key "Hide/Show FPS meter".
* Fixed some bugs in ATT Shared Memory interface module.
+ Added option to disable Aggressive 3D detection code for compatible issues.
* Updated "Monitoring Graphs". Added support for minus temperatures. * Added 2 new monitoring sources:
1. Free Video (onboard) Memory
2. Free Texture Memory (onboard memory + AGP Memory)
* Now monitor will display values at left side of line when you point your mouse over history line.
+ Added support for new X850 models
* Upgraded color correction module to support two displays. Now you can save separate color profiles for each display. Now hot keys will apply color correction only for selected display. You can change active display for color correction from Color menu or by pressing hotkey. After loading color profile, you active display for color correction also will be changed.
+ Added hot key to switch active display for color correction.
* All items from Tweak Menu moved into one Dialog Box "Standard Tweaks". TemporalAA, CatalystAI removed from menu and can be access from either Direct3D settings or OpenGL settings dialog boxes.
ATI Tray Tools 1.0.2.625
+ Added support for PAL-M TV Format
* Now ATT can detect started application and apply apropriate settings even if this application is in exception list.
+ Added missed Smart Shader effects
* Fixed bug with restoring previouse OpenGL settings in "Game Profiles"
+ Added new monitoring source "FPS Counter".
- Removed "Free Texture Memory (D3D only)" field from FLashOSD
+ Added "Free Video Memory" and "Free Texture Memory" to FlashOSD module. Will work with any 3D API.
+ Added support for Custom Smart Shader effects in Control Center mode.
* Improved support for Catalyst Control Center.
+ Added "Force Triple Buffer (D3D)" in Game profiles. This option is application depended and can not be enabled as system wide option. To be able to use Direct3D Force Tweaks you must keep enabled "Aggressive 3D Detection" option.
* Impoved Auto 2d/3d and OSD Modules.
+ Added option to select custom Smart Shader files from list of files in "Smart Shaders" folder.
* Fixed wrong detection of some Radeon 9100 boards
* Minor changes in 3D Rendering window to speed up rendering procedure up to 10%.
ATI Tray Tools 1.0.2.640
- Fixed incompatible issues with third party shell replacements (Aston and etc.)
- Fixed bug when some games and applications can not start with enabled "Aggressive 3D Detection" option
- Fixed OSD Module when some FlashOSD fields appears as 0
- Fixed error with Pixel and Vertex shaders override option.
- Fixed error when OpenGL application can not start with Smart Shaders enabled
- Improved support for Custom Smart Shaders under Catalyst Control Center
- Updated OSD Module for OpenGL applications. Now no in game effects (like AA/AF) will affect rendering of FPS and FlashOSD.
- Added option to disable changing FPS color if FPS Value less than 25
- Added option to disable low level color correction. (Temporarily fix for Windows 64bit)
- Increased Maximum Overclocking limit up to 200%
Mam problem. Pri spusteni Direct3D hry mi Ati Tray Tool sam od sebe ukazuje v levem hornim rohu FPS. V 3Dmarku05 to sezere 50b. Jak to vypnout, v nastaveni jem nic nenasel a delaji to jen posledni verze (asi 600-663)
tools and options=>OSD=>generals setings=>enable onscreen displayCitace:
Původně odeslal PhoB
Diky MIKROBOSS
Flash: ne 673, ale 663 ;-)
Citace:
Původně odeslal PhoB
1.0.2.673 (May 17, 2005)
* Updated Color Module. Decreased step for gamma correction.
* Renamed "Advanced Direct3D Tweaks" to "Advanced Tweaks" and now support OpenGL tweaks too.
+ Added a few new tweaks in "Advanced Tweaks" section
* Fixed bug with OSD Plugins when no information displayed even if "Use Plug-in" was checked.
+ Added two "Hide" option in OSD module to hide separate FPS and FlashOSD (with hotkeys)
+ Added new font style for FPS Meter "Small fonts".
* Updated "System Tray Hardware Monitoring". Now you can specify font name, size and style to use
in system tray icons.
+ Added new OSD Plug-in "Mother Board Monitor". This plug-in can show any information from Motherboard Monitor application in
FlashOSD module.
http://downloads.guru3d.com/download.php?det=733 :arrow: :idea:
lidi nevite cim to muze byz ze me nejde skoro zadny refresh force??? hlavne potrebuju si dat v Q3 (OpenGl) 110Hz.... jde to pouze pres powerstrip... ale stve me ze se frekvence meni 2x za sebou.,.. prvne na tu ktera je ve windowsech a po sekunde tu co tam mam mit.. no je to drobost,, ale vrta mi to dost hlavou... ATI tray tools ani nic.. a nejde tam dat 110 HZ.. jenom 100 nebo 120! stejne tak refresh fix
btw.. grafarnu mam R9100 a catalist 5.5 ale toto dela na kazdem
1.0.2.685 (June 5, 2005)
* Improved OSD support for OpenGL applications
* Update rendering procedure for FlashOSD text. Now FlashOSD will use smaller spacing between characters.
* Recreated Screenshot system, Now ATT will make screen shot directly from application rendering data. If no game is active, ATT will use old WinGDI method. Be informed, OSD Module must be enabled to make in game screenshots because this system shares the same resources with OSD module.
* Updated Core name detection database (up to R520/R530 models)
- Removed plugin "OSD MotherBoard monitor"
* Added new OSD Plugin "OSD Motherboard Sensors". This OSD plugin can show information from MotherBoard monitor, SpeedFan, PC Alert (MSI)
+ Added support for X700 Mobility
+ Added support for FireGL V5000
+ Added a few new tweaks in "Additional Tweaks" section
* Fixed bug with rotation hotkey.
* Fixed some character rendering in FlashOSD module
* Now game profiles in menu will show game executable icon
:arrow: http://mr-71159.v-mirror.spb.ru/atitray/attsetup.exe
1.0.2.690 (June 10, 2005)
* Recreated "Advanced Tweaks" module. Now this module will use external database files for tweaking. You can create your own files and put them in Database folder. Just look for example in predefined database files.
* Improved Catalyst Control Center support
* Fixed serious bug when new build of ATT unable to start if game executable doesn't exists
:arrow: http://www.radeon2.ru/atitray/attsetup.exe
Aktuálně - Ati Tray Tools 1.0.2.705
1.0.2.705 (June 27, 2005)
+ Added Shell Context menu for executable files. Now you can easily create/edit and delete game profiles associated with selected executable file. Just click right mouse button and select apropriate menu item from "ATI Tray Tools" menu. ATT must reside in memory to be able to do this job.
+ Added option to add offset (by X and Y) for OSD position in game profile.
+ Added option to show temperatrure in Fahrenheit. (FAN Speed table use only values in Celsius.)
+ Added new button in Game Profiles. "Detect 3D API Type". Using this button you can check what 3D API type is used in the selected profile. ATT will not be able to detect API type if the selected executable doesn't link directly to known 3D API library files like opengl32.dll, d3d8.dll, d3d9.dll.
* Updated Overlay Theater Mode. Now you can set separate settings for Clone and Extended Desktop Modes.
* Now TV settings accessible in Exntended Desktop mode too.
* Reenabled menu item to launch Windows Display Properties
* Updated installation procedure. Now if installation procedure unable to overwrite some files, it replace these files after restart. You must restart your computer in this case.
* Fixed wrong file name creation in ScreenShot module.
* Fixed some errors with Game Profiles in Control Center mode
* Fixed bug when ATT unable to start on system with Dual Monitors.
Funguje vám 1.0.2.705 dobře? Já jsem to nainstaloval a spustil a začaly mi padat "rezidentní" programy (Girder, AVG7 mail scanner, Creative AudioHQ) ??? Nevím teda jestli je to tím att, ale začlo to hned po nainstalování a spuštění...teď má z5 starší verzi a zatím dobré... :?:
1.0.3.720 (July 18, 2005)
+ Added new options into Game Profiles. Direct3D9 tweaks. Using this tweaks you can override some hardware information about your video board.
+ Added support for SMARTGART. Look in "Hardware" menu. (SMARTGART service must be installed and enabled!)
+ Added 5 new hotkeys for manual overclocking GPU and Memory by 1 step up or down.
+ Added new tweaks databases Video Acceleration settings and Display Tweaks.
+ Added Default buttons for Standard Tweaks window, Direct3D and OpenGL Tweaks.
+ Added options to execute applications when entering 3D mode and when leaving it.
* Updated installation procedure. Added two shortcuts to Install and Uninstall ATT Windows Shell Integration.
* Updated Shared Memory. Now FPS counter is included in global ATT Shared Memory.
* Improved command line support. Added command line options:
/LD3D [name of profile] - load Direct3D (or 3D in Control Center mode) profile
/LDGL [name of profile] - load OpenGL profile
/LDOV [name of profile] - load Overclocking profile
/LDTV [name of profile] - load Display/TV profile
/LDGP /LOADGAME [name of profile] - load Game Profile (If ATT is already started /EXIT command line parameter has no effect) /RSTCLK - reset clocks to default values
/EXIT - Exit from ATT
For example if you want to load overclocking profile and exit from ATT, you can add shortcut to ATT into Startup folder of system menu and add this command line. Always put profile name in quotation marks.
atitray.exe /LDOV "My Stable OverProfile" /EXIT
* Fixed bug when TV Properties Tab doesn't visible with extended desktop mode. Now TV Options will be accessible all times, even if you don't have TV attached to the board.
* Updated screenshot system. Added support for JPG/PNG file creating. Screenshot without active game always will be saved as BMP.
* Fixed broken support for temperature monitoring and fan control for ASUS 9800XT boards.
* Improved OSD rendering in situation when game clipped part of screen with ViewPort.
* Fixed error with hotkeys (Hide/Show FPS/FlashOSD)
* Updated Advanced Tweaks editor
* Updated "No overclocking" mode. If you Radeon doesn't supported by ATI Tray Tools (IGP series) you can disable all overclocking functions in atitray.ini. Set opt_disable_ovr value to 1. In this mode all modules depended on GPU and Memory clocks will be disabled. For example Overclocking, hardware monitoring, Auto 2d/3d Overclocking and so on. But you still can use all other functions!
* Fixed wrong OSD color calculation for some old Direct3D (D3D 7/6/5) games.
:arrow: http://www.radeon2.ru/atitray/attsetup.exe
1.0.3.730
1.0.3.730(August 18, 2005)
* Updated display rotation module.
* Update device names database
+ Added Catalyst A.I. control into Direct3D submenu
* Improved OSD support for OpenGL games and applications.
* Moved all I2C control functions into kernel mode driver.
+ Added option in General Settings to disable reset clocks before suspend mode.
* Update "OSD Example" plug-in. Added option to show power status. (Battery life time)
+ Added new auto overclocking mode depended on computer power status.
Download
nevite nekdo jak si zachovat vsechny profily aby se nesmazaly s instalaci nove verze ?? nejaky ten konfiguracni soubor nebo neco obdobneho....
Při odinstalovaní se tě to ptá jestli chceš zachovat nastavení ne? tak dáš ano a po instalaci nové verze máš vše nastavené. aspoň u mě to tak funguje.Citace:
Původně odeslal epidot
1.0.3.755 - Release ještě pouze v ruštině - EDIT: s tím by se hledal snad jenom silenec ;D :wink: .
http://www.radeon2.ru/atitray/attsetup.exe
ale houby v rustine, daval jsem to jeste na Vbull forum, to ze na guru3D to jeste nemaji neznamena ze to neni.Citace:
Původně odeslal flash
1.0.3.755
* Updated core and product names database. Included X1300, X1800 information
* Fixed bug in Display Detection procedure in Windows 64
* Fixed error with ScreenShot file name generation
* Fixed bug with Custom Game profiles.
+ Added option in Advanced Direct3D Tweaks database to force support for Adaptive AA
A ATi Tool vedete? :wink: :wink: :wink:
nevedeme, toto je lepsi :wink:Citace:
Původně odeslal Crusheer
J asem ati tray tools používal na mjinutý ati kartě, jenze ten program mi obcas jen tak restartnul system. tak ja to ted skusim :-) :-) :-)
1.0.4.780 (October 19, 2005)
[+] Added option in atitray.ini to enable old I2C control method. Used prior 750 build.
[+] Added option in atitray.ini to turn on OLD BIOS detection procedure
[+] Added support for F75363/F75363SG sensors
[+] Added new option to configure quality of Adaptive AA. You can select from two modes. Performance and Quality.
[+] Added new option to enable "High Quality AF". Enabling this feature may impact performance. This feature is not supported by all ATI graphics cards. (it seems only R5xx series can handle this feature)
[+] Added experimental support for Digital Flat Panels and Mobile LCD Panels.
[F] Fixed error when ATT tries to read clocks and unable to start if clocks equal 0 even if overclocking was disabled.
[F] Fixed error in Game Profile creating procedure when the game name contains ampersand chars
[F] Fixed bug with wrong BIOS detection procedure[*] Redesigned Direct3D and OpenGL configuration dialog boxes[*] Updated TV/Display module. Added experimental support for old Radeon boards (less than 9500)[*] Improved ATT shared memory update procedure
1.0.5.815
[F] Fixed bug when ATT produce BSOD at start up on some motherboards like Asus P5WD2[*] Improved current 3D settings detection on new Catalyst installation
[F] Fixed bug with wrong detection of current level of Adaptive AA.
[+] "Save Icon Position" module now will save positions for each resolution you will use. Saved positions
are incompatible between different resolutions.
[+] Added new module in monitoring graphs. "Motherboard Resources". Now you can directly monitor
temperatures, voltages on your motherboard! Big thanks to OverSoft team for SIO Engine plugin.
Full supported sensors Winbond: W83627HF, W83637HF, W83627THF, W83782D, W83781D, W83697HF, W83627EHF
ITE: IT8705F, IT8712F. Abit uGuru. Partially supported Winbond W83647HF, Asus AS99127F,
Fintek F71872. This module in beta test stage.
[+] Added support for custom FPS color in game profiles. Only for OpenGL/Direct3D8/Direct3D9 Games
and applications. For old Direct3D and DirectX games (Direct3D7/6/5) custom FPS color will be used
only if game will use 32 bits color format in rendering procedure.[*] Updated Core names database. Included information about R580, R600, RV370X, RV371,
RV530 LE/SE/VE chips.
[+] Added information about X1900 boards[*] Now Overclocking and Monitoring disabled by default for R5xx boards. Until I find more
information about overclocking new ATI chips.[*] Now ATT will not update Monitoring Tray Icons if registered games is active.[*] Moved all overclocking procedures into Kernel mode driver.[*] Updated I2C procedures. [*] Updated OSD plugin "Motherboard resources". Added support for internal ATT Motherboard
monitor sources. [*] Updated plugins API. Included functions to access internal Motherboard monitor information.
Some function has been updated for OSD Plugins. Please refer to readme.txt in plugins folder. All third party
runtime and OSD plugins with configuration procedures must be updated.[*] I2C Dump procedure now can be directly accessed in System Information module.
[F] Fixed wrong CRT + TV detection in System Information module.
[+] Updated texture LOD adjustment procedure. Now you can select positive value, which can
increase performance, but in result of very bad quality.
[+] Added support for HDTV modes in Display module.[*] Improved TV/Display module support under Windows XP 64
[F] Fixed situation when ATT unable to properly detect supported display types
[F] Fixed bug when ATT lockups in System Information module under Windows 64.[*] Updated ATT Shared Memory. Included information about free Video/Texture memory, current 3D api and System Memory used by
game. Last two fields will be updated only if any 3D application is active and in FlashOSD interval.[*] Recreated color correction procedure. Now colors will be changed automatically on all available displays. Added support
for color correction on X1300/X1600/X1800/X1900[*] Added option in Game Profiles to adjust interval in seconds in which ATT will check and update current colors in game.
Default value is 10 seconds.
[F] Fixed incorrect FPS color rendering for DirectX and old Direct3D games
ATI Tray Tools 1.0.5.820
Changes:
* Added new configuration option (in atitray.ini) to exchange GPU and Environment temperatures.
* Fixed wrong temperature display in Overclocking window if SharedMemory was disabled.
* Fixed issue when ATT unable to restore current colors after game end.
* Fixed issue when ATT shows incorrect values for free Video and Texture memory in FlashOSD module.
Měl bych menší dotaz jak můžu v tomto programu(verze 1.0.5.820) nastavit rychlost otáček Fanu.Když si je nastvím podle své potřeby a uložím třeba i do profilu tak vždy při spouštění Win najede default nastavení a moje nastavení je smazané.(je zajmavý že takty uložený zůstanou ale otáčky větráčku ne).
Grafika X800XL + Zalman VF700AlCu(předělanej na konektor na grafice).
Vyřešeno - už to funguje;-)
1.0.5.824
*Updated core names database. Added information about R505 chips.
*Improved "High precision" overclocking mode for X8xx boards. Now ATT can set more accurate values for requested GPU and Memory clocks.
*Resrticted I2C scan procedure up to 0x4F address.
Jak se dá vypnout to FPS ? Ukazuje mi to vpravém rohu počet snímků.Nemohu najít kde se tato položka dá zrušit. Jinak utilitka je to fakt šikovná.
Citace:
Původně odeslal Dusan
je to pod Tools & options - OnScreen Display na položce OSD Screen Corner zaškrtneš HIDE.
Taky jsem si s tím před asi 14 dny lámal hlavu a nemohl to najít
ATI Tray Tools v1.0.5.877 Release Candidate
Bez X1xxx overclockingu, ale už je tam temp a voltage monitoring a fan control:
[I] Overclocking for X1300/X1600/X1800/X1900 disabled in this release due to lack of information and without hardware sample in my laboratory.
[F] Fixed ATT loading bugs in Windows 2003 Server when Hardware acceleration is disabled.
[F] Fixed bug in 3D Scanner when ATT enters into infinite loop
[*] Updated new "Apply 3D settings" method.
[*] Support for TRUFORM now disable if detected Catalyst version more than 5.9
[*] Improved Auto FAN Control method for FinTek sensors. Now you can manually adjust RPM in temperature table.
[*] Updated Monitoring Graphs module to support new monitoring sources
[*] Updated kernel mode I2C procedures.
[*] Geometry Instancing now can be included in 3D profiles
[*] Reverted color correction procedure to old type, when you can adjust color individually for different displays.
[*] Updated internal benchmark module. Now benchmark will render two scenes, first in max speed mode and second one in max quality mode. And benchmark will be run on full screen mode (1024x768x32bit)
[*] Updated Color calculation procedure. All color profiles must be recreated.
[*] Updated Sound Recorder. Now you can configure input source and level of recording signal directly in ATT.
[+] Added temperature monitoring, voltage monitoring and fan control for R5xx boards (X1600/X1800/X1900)
[+] Added new X1600 and X1900 DevieID's in database.
[+] Added deinterlacing method adjustment in Video Overlay module
[+] Added 3:2 pulldown support
[+] Added support for new TV Video standards
[+] Added voltage monitoring for video board with FinTek sensor (Mostly used by ASUS)
[+] Added option to change Jpeg quality for screenshots.
[*] Updated start up modes option. Now you can select how ATT will start with Windows. Via registry or via StartUp menu folder.
[*] Update "Switch rotation" hot key. Now it will switch between 0 and 180, or 90 and 270 and vice versa
[*] Updated Injection code procedures to prevent games from crash if used with "fake" Direct3D9 dll file.
Build 1.0.5.880 RC
[F] Fixed bug with auto fan control on R5xx boards (X1600/X1800/X1900)
[*] Updated injection code to allow to use custom made (fake) d3d dll files.
[F] Fixed bug with loading color profile using hot keys
http://atitray.fangel.ru/viewtopic.php?t=199
vedle..
Když si udělám nastavení profilu ke hře musím ji spouštět potom přes ikonu vytvořenou Ati Tray Tools nebo se mi spustí i přes ikonu od té hry ? Nevím potom na co je tam ta funkce k vytvoření ikony ?
Konečně...:)
[+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or if you have a problem with low level overclocking. Remember this option will be active only if your video board support Overdrive version 3 and ATI HotKey poller service is started.
[+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be
resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via game profiles it is a safest way.
[*] Updated color correction hotkeys, to support new color correction formula
[*] Updated 3D renderer and benchmark module.
[F] Fixed situation when 3D renderer shows artefacts after using benchmark module.
[+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There are no way to activate them for old video board, so do not ask me about it.
[*] Updated auto FAN control functionality for R5xx boards.
[*] Updated system information module. Added basic information about Overdrive support.
[F] Fixed broken OSD functionality for Direct3D8 games and applications.
[F] Fixed detection of current 3D profile with no GI option included
[*] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game or application is active and OSD enabled.
[*] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor (like 9600XT/9800XT)
[F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters.
[F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations.
[+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted. Note some modes can be disabled in certaint situation, such as display rotation
[+] Added support for "Perserve Aspect Ratio" option in Display module. If supported by LCD or DFP display.
[F] Fixed bug with hotkey for decreasing contrast in color correction procedure.
[+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)
[*] Monitoring Graphs window now will be automaticaly reopened after suspend mode if it was active before entering into Suspend mode.
[+] Added option to Force TV Detection. If you are using an older TV or one that has non-standard inputs that may not be automatically detected, use Force TV Detection.
[+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.
[*] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not expect a lot http://forums.guru3d.com/images/smilies/smile.gif
[*] Updated Core names database. Added information about RV570/RV535 chips.
[+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting clocks and voltages to default state.
[F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode.
[+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages.
[+] Added new command line parameters:
/LDSD - Load "Default Single Display" profile
/EXD - Turn Extended Desktop On/Off
[+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading.
Zdravim. Cez co si taktoval grafiku?
Nějaké dobré zprávy do budoucna
Originally Posted by Ray Adams
I said that there are no way to use Overdrive with values more than limit in CCC. This is not true I just finished updating Overdrive support and in next release you will be able to set ANY clocks and even more, you will be able to change GPU Voltage too!
1.2.6.940
Je to tu !!!
Babelfish preklad :) Snad to z toho pochopite:
"Renovated the module of control Overdrive 3. Now you can advance any accessible frequencies to GPU and memory (above or lower than possible in THE CCC), and also advance voltage to GPU."
celá zpráva
1.2.6.940
[F] Fixed bug when manual fan control can not be applied[*] Updated some translation files
[F] Fixed Old I2C Method to be compatible with X1xxx boards in memory voltage control procedure
[+] Added ability to change how ATT will react on "ATI HotKey poller" service. (in General options)[*] Updated Overdrive control procedure. Now you can set any available clocks for OverDrive even beyond the Catalyst limits!
And change GPU Voltage too.
[+] Added option to apply OverDrive settings on startup
[+] Added Portuguese (Brazilian) and Belorussian translations
________
Can be downloaded from Guru3d (when will be updated) or by checking for new version in General options in ATI Tray Tools.
Ray jede :)
News about next release
At this moment I'm finishing adding new method of overclocking for R5xx boards. This method will be called "Driver Level".
What will do this method:
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not resets by that service in 3D games
5. With this method clocks will not resets when you play any video files (checked on my 1800XT, no more resets)
6. More stable overclocking. Catalyst know HOW to do overclock job better that any other utils
________
I hope this method will work without problems, but there are some disadvantages:
1. It seems that this method can be used only on video boards with Overdrive support (I will check it with non Overdrive board 1600Pro)
2. The step in MHz will be higher than in Low Level ( about 6MHz)
celkem zajímavé reakce od Unwindera a Wizzard na práci Raye
http://www.rage3d.com/board/showthread.php?t=33868890
No teda jestli je to pravda, tak to celkem mení můj názor na Mr. Adamse... ale ne na ATT.Citace:
Původně odeslal Spajdr
Jediny problem, proc jeste pouzivam AT a ne ATT je ten, ze ma dost divne nastaveni voltazi u pameti. Mel by jeste dodelat moznost nastaveni vsech 3 voltazi na pameti a jeste aby se to nastaveni aplikovalo pri prepnuti do 3D. Pak jeste nejak obejit relaxovane casovani pameti, protoze to silene zpomaluje oproti AT (par tisic v AQM3) a pak by to bylo super )
ATI Tray Tools 1.2.6.955
[+] Added new overclocking method for X1xxx boards with Overdrive support. "Driver Level overclocking".
Near the same method first was introduced in RivaTuner and then in ATITool.
What will do this method?
1. Overclocking will be done by Catalyst itself like Overdrive
2. Voltage will be applied by driver for GPU and by ATT for memory. Only for hardware with voltage regulator
3. ATT will emulate Overdrive job, but will allow to set clocks when you want it instead of when you run full screen 3D application.
4. This should work even if you didn't disable ATI HotKey poller! And clocks will not reset by that service in 3D games
5. With this method clocks shouldn't not resets when you play any video files (tested on my 1800XT)
6. More stable overclocking.
7. You can create full featured overclocking profiles in ATT and use them in game profiles.
8. For Video board without OverDrive support ATT will use alternative method for overclocking like used in ATI WinClk and also in last release of RivaTuner.
But this method has some disadvantages:
1. Big steps for clock regulators. For GPU about 6Mhz and about 9Mhz for Memory.
2. Not all voltages can be applied. Try not to set voltage less than 1.1000 and voltage can not be applied if video doesn't support voltage control.
[*] Improved Overdrive 3 support. Now ATT will calculate nearest possible clocks before applying.
[+] Added Japenese, Finnish translations
[+] Added option to include clocks in Overclocking Profile. Now you can create profile just for FAN or for Voltage control without GPU and Memory clocks. "C" means that profile has Clocks included.
[*] Updated user interface in some dialog windows.
[*] Updated "New AA & AF Methods" database. Added a lot of experimental options to improve antialiasing methods like SAAOM, EATM.
No ja bych potreboval poradit s voltazi pameti. Me de nastavovat pouze jadro, kdyz zmenim vurent voltaze pameti tak to je dle me jen tak kdyz to jede ve 2d a jeste mi nejde prepsat po pouziti se mi vraci zpet na svoji hodnotu.
http://3web.dkm.cz/myie2cz/test/ATT_AAexperimental.jpg
Myslím že ani sám Ray Adams neví co to všechno těch 13 AA módů dělá :D
DOWNLOAD
Fixed procedure to display memory clocks as DDR in Overclocking Window.
Updated tray icon
Added hotkeys to switch monitor rotation between 0/90 and 0/270
Added Romanian translation
Updated existing translation files
Added Memory IO voltage control for X1xxx video boards.
Updated GUI interface for some dialog boxes
Updated core names database
Added 500ms delay before restoring previous 3D settings after exiting from game. If this included in game profile.
Updated text rendering procedure in FlashOSD module
Updated overclocking support for RV570 and RV560 boards. Thanks Unwinder for help and information.
Tak sem si teda stahnul tu posledni verzi 964, ale nikde nemuzu najit polozky upravy napet nebo casovani pameti. Kolonka ATI ovedrive 3 je nefunkcni. Ze by to na x1650pro nefungovalo? Nak
ja to iste... zrejme je to tym, ze mame Omegy 6.9... dufam ze skoro vyjdu nove aj s plnou podporou r1650Pro.....Citace:
Původně odeslal Nakadah Al Jaffa
No prave...originalni catalysty instalovat nechci. Sem rad ze grafika ficela hned napoprve - s omegama. O potizich s catalysty uz sem neco slysel, tak se tomu hodlam vyhnout. NakCitace:
Původně odeslal Hazo
Takze ray kupil HD 3870 a zacal pracovat na ATT pre tie rady kariet.
ATT beta with HD 3xxx (and may be 2xxx) support
Samozrejme pri tej prilezitosti, vydal nove ATT
Download
http://cid-a50350ea7a969f0c.skydrive...c/attsetup.exe
attsetup.exe
http://rapidshare.de/files/38791527/attsetup.exe.html
Fixed wrong FAN monitoring
Fixed bug with System Tray monitoring window
Disabled "Calculate" button in Overclocking window
- Some fixes in FAN control
- Implemented support for new AA modes and AA Filter modes
http://img159.imageshack.us/my.php?i...autofanfy0.jpg
parada, a ze jsme se nacekali co :lol:.. jdu to nahodit :)Citace:
Původně odeslal AjsTi
JJ ;) Male OT/Ray proste nemal prachy na novu grafiku a nemohol pokracovat vyvoj, tak sa pozbierali ludia z fora a kupil grafiku a obnovil svoj program /OTCitace:
Původně odeslal rombo
Mimochodom monitorovanie otacok ide, alev tray sa mi sotva na sekundu zobrazi teplota a potom tam je len nula, ale ta bublina ked na to dam mysku ukazuje teplotu zhodnu co ukazuje rivatuner.
bohuzel toto mi to dela taky :rolleyes:Citace:
Původně odeslal AjsTi
EDIT: a dokonce se ta teplota ani neaktualizuje, no zrovna funkcni ten ATT moc neni :(
Napisem Rayovi, cera som jaksi uz ani nemohol ;) Zaujima to nielen teba ale i mna.Citace:
Původně odeslal rombo
EDIT:Zrejme treba skusit poslednu betu. http://cid-a50350ea7a969f0c.skydrive...c/attsetup.exe 1.4.7.1111 , on ich tam teraz vydava ako na pase ;)
Hold som v praci, najskor az doma ;)
EDIT2: Monitoring v systray funguje ! Uz je verzia 1.4.7.1113.
ano, potvrzuji ze funguje ;).. dokonce uz je verze 1.4.7.1115 kterou mam momentalne nainstalovanouCitace:
Původně odeslal AjsTi
New beta uploaded (build 1114)
+ Added experimental button "Apply Fix" (in FAN tab of overclocking window) which should fix problems with auto fan control. Just click it ones and set auto mode. Then tell me how your Fan works
No staci spamu, pockam na full verziu ;) O 1115 nepise co je nove a pocitam, ze do rana bude aspon 30 na konci ;)
Inac toto sledovat ;)
Nevíte čím to může být ? Tento program jsem používal se svojí AGP ATI X8OOPRO , ale teď jsem si pořídil novou PCIe HD3850 a nechce mi spolupracovat. Zobrazuje úplně nějaké divné takty paměti i jádra a pokud chci přetaktovat tak mi to spadne. Používám ATI CATALYST 9.2.
Otazka je aku verziu programu pouzivas, istu dobu robi Ray len bety, ktore doraba na niektore novsie karty. Takze miesto starej full doporucujem si stiahnut betu. Ja mam HD3870 a takty funguju ako maju.
treba zde...
http://majorgeeks.com/ATI_Tray_Tools_d4569.html