ST380011A and diagnostika
ahoj prosim vas potreboval bych vyvodit zaver z diagnostickeho testu hdd.
my hdd je 80gb seagate barracuda st380011A s 2MB cache, jedna se o pata a nevim jak mam z toho poznat jak je na tom uj hadr chudak proto hazim log z neho do druheho postu do sameho threadu. predem dik kdo mi to nejak objasni.
Z testu sem samozrejme pochopil ze je to ok ze tam byla polozka passed coz vim ze dobre dopadlo, ale me jde jen o to pochopit ty polozky. na co bys ce nel zamerit a ovazovat za moznou pricinu chyb v budoucnu diky moc
ST380011A and diagnostika
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
1/1/2006 @ 12:00 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 06/12/00
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A
Serial Number = 5JV6PEDQ
Int13 Num = 81, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9729x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 7815 64292
EXTENDED
2 NTFS 7816 9728 15735
Diagnostic Results:
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 01-Jan-2006 11:24:27
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JV6PEDQ
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156301488 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156301488) - Passed
Elapsed Time: 35.89 Minutes
Estimated Internal Transfer Rates
Min: 17.61Mb/s Max: 475.41Mb/s Avg: 311.59Mb/s
PIO/DMA Data Compare
Total Bytes = 23814144
Estimated PIO Transfer Rates
Min: 3.23MB/s Max: 3.42MB/s Avg: 3.33MB/s
Estimated DMA Transfer Rates
Min: 47.82MB/s Max: 79.70MB/s Avg: 59.59MB/s
Long Test Passed: 01-Jan-2006 12:00:32
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (64.2 GB) data) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (15.7 GB) software) Not Tested
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
================================================== ======
Re: ST380011A and diagnostika
a) nemas zapnuty smart. nevim proc.
b) nenalezeny zadne chyby hw razeni.
c) pokud mas nejaky problem, pouzij chkdsk /f anebo scandisk.
Re: ST380011A and diagnostika
tak smart sem dal enable v biosu pro oba dva hdd jak pro hdd wd tak seagate380011A.
Jinak u te kontroly povrchu hdd chkdsk /f se to vzdy musi davat pred tim otestovanim hdd softwarem seatool?
jestli ano jak to udelam abych si zkotroval povrch disku i u dalsich jednotek cili krome C: ktery je systemovy u ktereho ta kontrola povrchu disku probehla při příštím spuštění systému. jinak potrebuju zkontrolovat jednotky dalsi a to D: E: F: nevim jak na to.
jinak pises nenalezeny zadne chyby hardwaroveho zarizeni to se tyka toho hdd ze? pokud neni teda zaply ten smart.
Re: ST380011A and diagnostika
chkdsk c: /f ( zepta se te to, jestli chces kontrolovat pri dalsim spusteni, tak das ano ).
chdkdsk d: /f
chdkdsk e: /f
chdkdsk f: /f
a toto neni potreba delat pred pouziti seatools ( protoze ty netestuji filesystem, ale disk ).
Re: ST380011A and diagnostika
muj test dopadl takto: se zapnutym SMART:
PS: jeste neco bylo chybou kdyz sem nechal zaplyn enable smart i pro druhy disk WD kdyz sem testoval ten hdd seagate?
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
1/2/2006 @ 4:57 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 06/12/00
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A
Serial Number = 5JV6PEDQ
Int13 Num = 81, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9729x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 7815 64292
EXTENDED
2 NTFS 7816 9728 15735
Diagnostic Results:
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 02-Jan-2006 16:10:07
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JV6PEDQ
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156301488 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Check: Passed
Full Scan (0 to 156301488) - Passed
Elapsed Time: 36.49 Minutes
Estimated Internal Transfer Rates
Min: 8.80Mb/s Max: 475.41Mb/s Avg: 306.43Mb/s
PIO/DMA Data Compare
Total Bytes = 23905280
Estimated PIO Transfer Rates
Min: 3.29MB/s Max: 3.38MB/s Avg: 3.33MB/s
Estimated DMA Transfer Rates
Min: 48.66MB/s Max: 81.10MB/s Avg: 60.13MB/s
Long Test Passed: 02-Jan-2006 16:46:47
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (64.2 GB) data) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (15.7 GB) software) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
================================================== ======
jinak jak vidis je neco se strukturou pri testu to hodilo failed :-(
jinak jak rikam uz na zacatku nechal sem pri tom testovani seatoolsem zaply v biosu enabled i pro western digital disk
pak sem v biosu se u western digital prepl na disabled a seagate nechal enabled kdyz sem testoval strukturu systemu.
a napsalo to failded pri testovani struuktury
samozrejme seagate barracuda tam byl porad zaply smart cili enabled.
fakt nechapu proc failed pri testovani systemove striktury.
Re: ST380011A and diagnostika
a) seatools netestuji filesystem! pouze upozornuji na nesrovnalosti. jejich opravu zaridis viz vise.
b) SMART nechej zaply, je to system pro informace stavu disku.
c) zkus si o tom neco precist. zatim tady varis z vody.
Re: ST380011A and diagnostika
Citace:
Původně odeslal mISHA
chkdsk c: /f ( zepta se te to, jestli chces kontrolovat pri dalsim spusteni, tak das ano ).
chdkdsk d: /f
chdkdsk e: /f
chdkdsk f: /f
a toto neni potreba delat pred pouziti seatools ( protoze ty netestuji filesystem, ale disk ).
preklep ;-) je to CHKDSK
