nHancer (NVIDIA Profile Editor)

[Over]

Pro ty co si chtěj upravit profily pro gamesky ve ForceWare driverech, popřípadě vytvořit vlastní + nějaké featurky navíc, co nejsou běžně přístupné.
http://downloads.guru3d.com/download.php?det=978

...pro správnou funkčnost je třeba mít nainstalovaný MS.NET Framework 1.1 http://www.slunecnice.cz/product/Mic...NET-Framework/

[Over]

Version 2.0 Beta 9 (20th August 2006)

(32bit) http://www.nhancer.com/downloads/nHa...eta9_32bit.zip

(64bit) http://www.nhancer.com/downloads/nHa...eta9_64bit.zip

changelog:
* Fixed bug: Changes in the tray icon context menu would only be effective, if the “global settings” were currently selected in the nHancer window (even if the window is currently closed).
* Added new radio buttons above the “Settings” area to switch between global and profile settings. This was made cause it was too cumbersome to use the profile list if you want to switch between global settings and profile settings.
* Corrected the SLI recognition code. Now nHancer will again detect if your system has an SLI setup. If not, the SLI tabs will be removed and you will be asked if you want to remove all SLI-only profiles at the first startup of nHancer. If SLI is available but just disabled right now, nHancer still should show all SLI tabs and shouldn’t give the option to remove all SLI profiles. Please let me know if that doesn’t work correctly on your system.
* The SLI load balancing graph setting is now disabled if SLI is disabled.
* If some dialog message appeared while the splash window was still open, the dialog was closed together with the splash window, making it impossible for the user to read and answer the dialog. Now, each dialog will directly close the splash window, if it’s still open.
* The installer would create new entries in the “Add/Remove Software” control panel for each new version. Now a new entry is only created if nHancer hasn’t been installed previously.


MS .NET 2.0 Framework
http://www.microsoft.com/downloads/d...DisplayLang=de

[Masster]

Z pocatku byla tahle utilita hlavne pro uzivatele se SLI, ale v dnesni dobe bych ji doporucil opravdu kazdemu.

nHancer

Advanced Control Panel and Profile Editor for nVidia cards

Now released:

Version 2.1.0 (Dec 17th 2006)

Download 32bit version

Download 64bit version

also required

.NET Framework 2.0

Features

• Support of Forceware 60 and later, including the new 96 and 97 line
• Support of all GeForce cards, including the new GeForce 8x00 line
• Support for single card, SLI and Quad-SLI systems
• On-the-fly control of all global quality and performance-enhancing settings for all games
• Create and manage fully automated profiles for all your games
• Very easy to use, explains all options and their effects, like Anti Aliasing, Anisotropic Filtering, etc.
• Special options for nVidia's SLI feature, allowing you to to use almost every game with SLI even if nVidia doesn't support it
• Offers additional Anti Aliasing and Anisotropic Filtering modes, that are not available through nVidia's control panel
• Flexible user interface: change the size of the window and all sub areas
• User interface and help texts available in various languages (right now English, German, Polish and Spanish)
• Coexists perfectly with nVidia's own control panel and other tools, like aTuner or RivaTuner. nHancer will immediately detect any changes made by any other tool.

System requirements for nHancer

• Any nVidia GeForce graphic card
• Windows 2000, XP or 2003
• Forceware driver version 60 or higher
• MS .NET Framework 2.0 (download)

[Over]

nHancer 2.1.1 released

http://www.guru3d.com/newsitem.php?id=4884

Features

* Support of Forceware 60 and later, including the new 96 and 97 line
* Support of all GeForce cards, including the new GeForce 8x00 line
* Supports Windows Vista
* Support for single card, SLI and Quad-SLI systems
* On-the-fly control of all global quality and performance-enhancing settings for all games
* Create and manage fully automated profiles for all your games
* Very easy to use, explains all options and their effects, like Anti Aliasing, Anisotropic Filtering, etc.
* Special options for nVidia's SLI feature, allowing you to to use almost every game with SLI even if nVidia doesn't support it
* Offers additional Anti Aliasing and Anisotropic Filtering modes, that are not available through nVidia's control panel
* Flexible user interface: change the size of the window and all sub areas
* User interface and help texts available in various languages (right now English, German, Polish and Spanish)
* Coexists perfectly with nVidia's own control panel and other tools, like aTuner or RivaTuner. nHancer will immediately detect any changes made by any other tool.

[silenec]

nHancer 2.2.0 released

New Features in Version 2.2.0

• Vista related Problems with "User Access Control" (UAC) and Autostart fixed
• Compatibility with Forceware 100+ for XP added
• Reintroduced the Supersampling modes (8xS, 16xS, 2x2 etc.) for 8x00 cards
• Added all new Anti-Aliasing modes for 8x00 cards (32xS, SLI 64xS)
• Bugfixes and improvements

Download - http://downloads.guru3d.com/download.php?det=978

[Over]

nHancer 2.2.3 released

http://www.nhancer.com/?dat=downloads

New Features

• Added compatibility to 160+ Forceware versions
• Bugfix: On some systems, nHancer failed to startup (it hang with 100% CPU utilization).
• Bugfix: nHancer 2.2.x wouldn’t run on Windows 2000 systems, because the registry path to the driver settings looks different, so that the service denied any access to that path.
• Changed the installer so it’s now required to uninstall a previous version of nHancer before installing a new version. Due to various problems with the rather buggy installation routine which comes with Visual Studio 2005, there’s no better solution for the time being.

[Over]

nHancer 2.3.1 released

http://www.nhancer.com/?dat=downloads

New Features


• Compatibility with Forceware 163+ added
• Ability to configure DirectX 10 SLI compatibility
• Profiles customized by the user are shown in a different color and the list can be filtered to show customized profiles only
• Added several Anti-Aliasing modes for GeForce 8x00 cards
• Added a couple of compatibility options
• Replaced install routine (the original one could cause problems on some systems)
• If nHancer is started a second time, the first instance will be brought to front instead.
• Some Bugfixes.

[Over]

nHancer 2.3.2 released

http://www.nhancer.com/?dat=downloads

New Features


• Support for 8800 GT (G92) cards
• Compatibility with Forceware 169+ added
• Added Italian User Interface (thanks to Giulio Sosio!)
• Fixed installer problem that impeded installation on some systems with non-latin unicode settings
• Several additional 8x00 cards (G84 & G86) and 7x00 cards detected correctly now
• Added new SLI mode introduced with Forceware 169
• Smaller bugfixes

[Masster]

nHancer: 2.4.0 Beta 7

• Corrected all startup problems. Multithreaded startup for splash screen redone from scratch and much, much simpler.
• Added new filter option “predefined profiles of installed applications” (which is used by default). When used only predefined profiles of actually installed applications are shown. Great idea introduced in nVidia’s control panel
• Added new filter option “manual profiles”.
• Multiple profiles with the same name will now marked as conflicting.
• Profiles which are neither set to be activated manually nor contain any executables for automatic activation are now marked with a warning.
• Improved SLI detection.
• Bugfix: nHancer handled manual profiles incorrectly when reimporting profiles during startup. The same profile was offered for import upon each startup, which could result in the identical profiles in the profile list.
• Several Bugfixes (see http://forum.nhancer.com/project.php?projectid=1)

Download:

• x86 verze
• x64 verze

[Over]

nHancer 2.4.1 released

http://www.nhancer.com/?dat=downloads


New Features

• New graphical design for the logos, the splash window and the about window, made by Eberhard Klauke.
• Completely redesigned user interface for the profile management:
• Search for profiles by their name (just enter a part of the game's or the application's name while nHancer's window is active)
• Filter the list of profiles with the new filter menu (the icon on the top right corner of the profile list) using their type or properties. Most useful is the filter that shows only the profiles for actually installed programs
• Support for all GeForce 9x00 cards and all GeForce (formerly Forceware) drivers up to 175.x
• Even the fixed settings in nVidia's predefined profiles can now be altered, including the "forbidden" flag used in some profiles to disallow anti-aliasing. All profiles can also be reverted to their original state just by clicking on the "delete" button.
• Added additional anti-aliasing modes for GeForce 8x00 and 9x00 cards. The mode "8xSQ" is especially interesting, it gives 2x2 supersampling and 2x multisampling
• Added new SLI modes for triple and quad SLI
• Added support for Hybrid-SLI
• Added anti-aliasing compatibility flags for DirectX 10
• Added OpenGL multi monitor and multi GPU options
• If nHancer is started with full administration privileges, it runs fine even without the nHancer support service. It's possible to deny the installation of the service altogether during nHancer's installation procedure.
• A load of minor improvements and corrections. More details can be found in the Readme file

[Over]

nHancer 2.4.5 released

http://www.nhancer.com/?dat=downloads

New Features

• Added the French translation made by QuarkZ. Thanks a lot QuarkZ!
  
• Added detection for new chips.
  
• Improved the application scanner, some applications not found previously are now detected correctly.
  
• nHancer can be used while it’s scanning for applications. The result of the last scan is also saved.
  
• When resizing nHancer’s window, the profile list will now automatically scale with the window while the description pane keeps its vertical size. Note than you can still resize the description pane freely by grapping the pane divider just above the description pane.
  
• Bugfix: Closing nHancer right after it had been started could result in a 30 second delay until the process actually died.
  
• Small bugfixes.
  

[Over]

nHancer 2.5.1 released

Download nHancer 2.5.1 for 32 bit Systems

Download nHancer 2.5.1 for 64 bit Systems


New features

• Compatible with GeForce 182 and 185 drivers
  
• Fully compatible with Windows 7
  
• Added Ambient Occlusion settings (needs 185 drivers)
  
• Added new SLI Anti-Aliasing modes
  
• Reworked card detection to use the official API provided by nVidia (NVAPI)
  
• Completely new "Show GPU info" output
  
• "Compatibility" settings tab splitted into separate Direct3D and OpenGL sections
  
• Other user interface tweaks
  
• Switched to .NET 3.5
  
• Removed support for older drivers (pre 182) and older cards (pre GeForce 8000)
  
• Bugfixes

[Over]

nHancer 2.5.6 released

Download nHancer 2.5.6 for 32 bit

Download nHancer 2.5.6 for 64 bit

New features in Version 2.5.6

• Corrected problems with version 2.5.4

New features in Version 2.5.4

• Compatible with GeForce 190 drivers
• Added new options:
  
  • Power management
  • Direct3D 9 compatibility
  • various OpenGL compatibility options
  
  
• Japanese language
• Bugfixes

.NET Framework 3.5