Delphi : komunikace pres RS-232

Zdravim,
delal jste nekdo uz komunikaci v delphi pres seriovy port?
Potreboval bych z jednoho zarizeni dostavat data a soupat je do nejakeho memoboxu. Mam pouzit nejakou knihovnu?
BTW nemate nekdo nejake tutorialy na delphi?
Diky moc
M.

delal jsem neco podobneho do Builderu 6, snad vyhrabu nejakou tu komponentu...

EDIT: nasel jsem to...pokud budes mit zajem, tak mi dej mail na sz, na ktery Ti muzu poslat i vetsi prilohu - cca 3MB

Tohle je komponenta ComDrv32.pas, ktera funguje 100% v delphi. HalenTech
EDIT: Funguje i v delphi7
{
+-----------------------------------------------------------------------------
|
| ComDrv32.pas (see ComDrv16.pas for Delphi 1.0)
|
| TCommPortDriver component
| COM Port Driver for Delphi 2.0
| v1.08/32 - November 19th, 1997
|
| Written by Marco Cocco
| Copyright (c) 1996-97 by Marco Cocco. All rights reseved.
| Copyright (c) 1996-97 by d3k The Artisan Of Ware. All rights reseved.
|
| Please send comments to d3k@mdnet.it
| URL: http://www.mdlive.com/d3k/
|
+-----------------------------------------------------------------------------

************************************************** ****************************
* Permission to use, copy, modify, and distribute this software and its *
* documentation without fee for any purpose is hereby granted, *
* provided that the above copyright notice appears on all copies and that *
* both that copyright notice and this permission notice appear in all *
* supporting documentation. *
* *
* NO REPRESENTATIONS ARE MADE ABOUT THE SUITABILITY OF THIS SOFTWARE FOR ANY *
* PURPOSE. IT IS PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WARRANTY. *
* NEITHER MARCO COCCO OR D3K SHALL BE LIABLE FOR ANY DAMAGES SUFFERED BY *
* THE USE OF THIS SOFTWARE. *
************************************************** ****************************
* d3k - The Artisan Of Ware - A Marco Cocco's Company *
* Casella Postale 99 - 09047 Selargius (CA) - ITALY *
* Tel. +39 70 846091 (Italian speaking) Fax +39 70 848331 *
* E-mail: d3k@mdnet.it Home page: http://www.mdlive.com/d3k/ *
************************************************** ****************************
}

unit ComDrv32;

interface

uses
Windows, Messages, SysUtils, Classes, Forms;

type
{ COM Port Baud Rates }
TComPortBaudRate = ( br110, br300, br600, br1200, br2400, br4800,
br9600, br14400, br19200, br38400, br56000,
br57600, br115200 );
{ COM Port Numbers }
TComPortNumber = ( pnCOM1, pnCOM2, pnCOM3, pnCOM4, pnCOM5, pnCOM6, pnCOM7,
pnCOM8, pnCOM9, pnCOM10, pnCOM11, pnCOM12, pnCOM13,
pnCOM14, pnCOM15, pnCOM16 );
{ COM Port Data bits }
TComPortDataBits = ( db5BITS, db6BITS, db7BITS, db8BITS );
{ COM Port Stop bits }
TComPortStopBits = ( sb1BITS, sb1HALFBITS, sb2BITS );
{ COM Port Parity }
TComPortParity = ( ptNONE, ptODD, ptEVEN, ptMARK, ptSPACE );
{ COM Port Hardware Handshaking }
TComPortHwHandshaking = ( hhNONE, hhNONERTSON, hhRTSCTS );
{ COM Port Software Handshaing }
TComPortSwHandshaking = ( shNONE, shXONXOFF );
{ What to do with incomplete (incoming) packets }
TPacketMode = ( pmDiscard, pmPass );

TComPortReceiveDataEvent = procedure( Sender: TObject; DataPtr: pointer; DataSize: UINT ) of object;
TComPortReceivePacketEvent = procedure( Sender: TObject; Packet: pointer; DataSize: UINT ) of object;

TComPortLineStatus = ( lsCTS, lsDSR, lsRING, lsRLSD{CD} );
TComPortLineStatusSet = set of TComPortLineStatus;

TCommPortDriver = class(TComponent)
protected
{ COM Port Device Handle }
FComPortHandle : THANDLE;
{ # of the COM Port to use }
FComPort : TComPortNumber;
{ COM Port speed (brXXX) }
FComPortBaudRate : TComPortBaudRate;
{ Data bits size (dbXXX) }
FComPortDataBits : TComPortDataBits;
{ How many stop bits to use (sbXXX) }
FComPortStopBits : TComPortStopBits;
{ Type of parity to use (ptXXX) }
FComPortParity : TComPortParity;
{ Type of hw handshaking (hw flow control) to use (hhXXX) }
FComPortHwHandshaking : TComPortHwHandshaking;
{ Type of sw handshaking (sw flow control) to use (shXXX) }
FComPortSwHandshaking : TComPortSwHandshaking;
{ Size of the input buffer }
FComPortInBufSize : word;
{ Size of the output buffer }
FComPortOutBufSize : word;
{ Size of a data packet }
FPacketSize : smallint;
{ ms to wait for a complete packet (<=0 = disabled) }
FPacketTimeout : integer;
{ What to do with incomplete packets (pmXXX) }
FPacketMode : TPacketMode;
{ Event to raise on data reception (asynchronous) }
FComPortReceiveData : TComPortReceiveDataEvent;
{ Event to raise on packet reception (asynchronous) }
FComPortReceivePacket : TComPortReceivePacketEvent;
{ ms of delay between COM port pollings }
FComPortPollingDelay : word;
{ Specifies if the DTR line must be enabled/disabled on connect }
FEnableDTROnOpen : boolean;
{ Output timeout - milliseconds }
FOutputTimeout : word;
{ Timeout for ReadData }
FInputTimeout : UINT;
{ Set to TRUE to prevent hangs when no device connected or
device is OFF }
FCkLineStatus : boolean;
{ This is used for the timer }
FNotifyWnd : HWND;
{ Temporary buffer (RX) - used internally }
FTempInBuffer : pointer;
{ Time of the first byte of current RX packet }
FFirstByteOfPacketTime : DWORD;
{ Number of RX polling timer pauses }
FRXPollingPauses: integer;

{ Sets the COM port handle }
procedure SetComHandle( Value: THANDLE );
{ Selects the COM port to use }
procedure SetComPort( Value: TComPortNumber );
{ Selects the baud rate }
procedure SetComPortBaudRate( Value: TComPortBaudRate );
{ Selects the number of data bits }
procedure SetComPortDataBits( Value: TComPortDataBits );
{ Selects the number of stop bits }
procedure SetComPortStopBits( Value: TComPortStopBits );
{ Selects the kind of parity }
procedure SetComPortParity( Value: TComPortParity );
{ Selects the kind of hardware flow control }
procedure SetComPortHwHandshaking( Value: TComPortHwHandshaking );
{ Selects the kind of software flow control }
procedure SetComPortSwHandshaking( Value: TComPortSwHandshaking );
{ Sets the RX buffer size }
procedure SetComPortInBufSize( Value: word );
{ Sets the TX buffer size }
procedure SetComPortOutBufSize( Value: word );
{ Sets the size of incoming packets }
procedure SetPacketSize( Value: smallint );
{ Sets the timeout for incoming packets }
procedure SetPacketTimeout( Value: integer );
{ Sets the delay between polling checks }
procedure SetComPortPollingDelay( Value: word );
{ Applies current settings to open COM port }
procedure ApplyCOMSettings;
{ Polling proc }
procedure TimerWndProc( var msg: TMessage );
public
{ Constructor }
constructor Create( AOwner: TComponent ); override;
{ Destructor }
destructor Destroy; override;

{ Opens the COM port and takes of it. Returns false if something
goes wrong. }
function Connect: boolean;
{ Closes the COM port and releases control of it }
procedure Disconnect;
{ Returns true if COM port has been opened }
function Connected: boolean;
{ Returns the current state of CTS, DSR, RING and RLSD (CD) lines.
The function fails if the hardware does not support the control-register
values (that is, returned set is always empty). }
function GetLineStatus: TComPortLineStatusSet;
{ Returns true if polling has not been paused }
function IsPolling: boolean;
{ Pauses polling }
procedure PausePolling;
{ Re-starts polling (after pause) }
procedure ContinuePolling;
{ Flushes the rx/tx buffers }
procedure FlushBuffers( inBuf, outBuf: boolean );
{ Returns number of received bytes in the RX buffer }
function CountRX: integer;
{ Returns the output buffer free space or 65535 if not connected }
function OutFreeSpace: word;
{ Sends binary data }
function SendData( DataPtr: pointer; DataSize: UINT ): UINT;
{ Sends binary data. Returns number of bytes sent. Timeout overrides
the value specifiend in the OutputTimeout property }
function SendDataEx( DataPtr: pchar; DataSize, Timeout: UINT ): UINT;
{ Sends a byte. Returns true if the byte has been sent }
function SendByte( Value: byte ): boolean;
{ Sends a char. Returns true if the char has been sent }
function SendChar( Value: char ): boolean;
{ Sends a pascal string (NULL terminated if $H+ (default)) }
function SendString( s: string ): boolean;
{ Sends a C-style strings (NULL terminated) }
function SendZString( s: pchar ): boolean;
{ Reads binary data. Returns number of bytes read }
function ReadData( DataPtr: pchar; MaxDataSize: UINT ): UINT;
{ Reads a byte. Returns true if the byte has been read }
function ReadByte( var Value: byte ): boolean;
{ Reads a char. Returns true if char has been read }
function ReadChar( var Value: char ): boolean;
{ Set DTR line high (onOff=TRUE) or low (onOff=FALSE).
You must not use HW handshaking. }
procedure ToggleDTR( onOff: boolean );
{ Set RTS line high (onOff=TRUE) or low (onOff=FALSE).
You must not use HW handshaking. }
procedure ToggleRTS( onOff: boolean );

{ Make the Handle of the COM port public (for TAPI...) [read/write] }
property ComHandle: THANDLE read FComPortHandle write SetComHandle;
published
{ # of the COM Port to use }
property ComPort: TComPortNumber read FComPort write SetComPort default pnCOM2;
{ COM Port speed (bauds) }
property ComPortSpeed: TComPortBaudRate read FComPortBaudRate write SetComPortBaudRate default br9600;
{ Data bits to used (5..8, for the 8250 the use of 5 data bits with 2 stop
bits is an invalid combination, as is 6, 7, or 8 data bits with 1.5 stop
bits) }
property ComPortDataBits: TComPortDataBits read FComPortDataBits write SetComPortDataBits default db8BITS;
{ Stop bits to use (1, 1.5, 2) }
property ComPortStopBits: TComPortStopBits read FComPortStopBits write SetComPortStopBits default sb1BITS;
{ Kind of Parity to use (none,odd,even,mark,space) }
property ComPortParity: TComPortParity read FComPortParity write SetComPortParity default ptNONE;
{ Kind of Hardware Handshaking to use:
hhNONE no handshaking
hhNONERTSON no handshaking but keep RTS line on
hhCTSRTS RTS/CTS }
property ComPortHwHandshaking: TComPortHwHandshaking
read FComPortHwHandshaking write SetComPortHwHandshaking default hhNONERTSON;
{ Kind of Software Handshaking to use:
shNONE no handshaking
shXONXOFF XON/XOFF handshaking }
property ComPortSwHandshaking: TComPortSwHandshaking
read FComPortSwHandshaking write SetComPortSwHandshaking default shNONE;
{ Input Buffer size }
property ComPortInBufSize: word read FComPortInBufSize write SetComPortInBufSize default 2048;
{ Output Buffer size }
property ComPortOutBufSize: word read FComPortOutBufSize write SetComPortOutBufSize default 2048;
{ RX packet size (this value must be less than ComPortInBufSize) }
property PacketSize: smallint read FPacketSize write SetPacketSize default -1;
{ Timeout (ms) for a complete packet (in RX) }
property PacketTimeout: integer read FPacketTimeout write SetPacketTimeout default -1;
{ What to do with incomplete packets (in RX) }
property PacketMode: TPacketMode read FPacketMode write FPacketMode default pmDiscard;
{ ms of delay between COM port pollings }
property ComPortPollingDelay: word read FComPortPollingDelay write SetComPortPollingDelay default 50;
{ Set to TRUE to enable DTR line on connect and to leave it on until disconnect.
Set to FALSE to disable DTR line on connect. }
property EnableDTROnOpen: boolean read FEnableDTROnOpen write FEnableDTROnOpen default true;
{ Output timeout (milliseconds) }
property OutputTimeout: word read FOutputTimeOut write FOutputTimeout default 500;
{ Input timeout (milliseconds) }
property InputTimeout: UINT read FInputTimeOut write FInputTimeout default 200;
{ Set to TRUE to prevent hangs when not device connected or device is OFF }
property CheckLineStatus: boolean read FCkLineStatus write FCkLineStatus default false;
{ Event to raise when there is data available (input buffer has data)
(called only if PacketSize = 0) }
property OnReceiveData: TComPortReceiveDataEvent read FComPortReceiveData write FComPortReceiveData;
{ Event to raise when there is data packet available (called only if PacketSize <> 0) }
property OnReceivePacket: TComPortReceivePacketEvent read FComPortReceivePacket write FComPortReceivePacket;
end;

function BaudRateOf( bRate: TComPortBaudRate ): integer;
function DelayForRX( bRate: TComPortBaudRate; DataSize: integer ): integer;

procedure Register;

implementation

{+-------------------------------------------------------------------------+
| HELPER ROUTINES |
+-------------------------------------------------------------------------+}

function GetWinPlatform: string;
var ov: TOSVERSIONINFO;
begin
ov.dwOSVersionInfoSize := sizeof(ov);
if GetVersionEx( ov ) then
begin
case ov.dwPlatformId of
VER_PLATFORM_WIN32s: { Win32s on Windows 3.1 }
Result := 'W32S';
VER_PLATFORM_WIN32_WINDOWS: { Win32 on Windows 95 }
Result := 'W95';
VER_PLATFORM_WIN32_NT: { Windows NT }
Result := 'WNT';
end;
end
else
Result := '??';
end;

function GetWinVersion: UINT;
var ov: TOSVERSIONINFO;
begin
ov.dwOSVersionInfoSize := sizeof(ov);
if GetVersionEx( ov ) then
Result := MAKELONG( ov.dwMinorVersion, ov.dwMajorVersion )
else
Result := $00000000;
end;

function BaudRateOf( bRate: TComPortBaudRate ): integer;
begin
case bRate of
br110 : Result := 110;
br300 : Result := 300;
br600 : Result := 600;
br1200 : Result := 1200;
br2400 : Result := 2400;
br4800 : Result := 4800;
br9600 : Result := 9600;
br14400 : Result := 14400;
br19200 : Result := 19200;
br38400 : Result := 38400;
br56000 : Result := 56000;
br57600 : Result := 57600;
else
{br115200 :} Result := 115200;
end;
end;

function DelayForRX( bRate: TComPortBaudRate; DataSize: integer ): integer;
begin
Result := round( DataSize / (BaudRateOf(bRate) / 10) * 1000 );
end;

{+-------------------------------------------------------------------------+
| TCOMMPORTDRIVER |
+-------------------------------------------------------------------------+}

constructor TCommPortDriver.Create( AOwner: TComponent );
begin
inherited Create( AOwner );
{ ** Initialize to default values *************************************** }
{ Not connected }
FComPortHandle := 0;
{ COM 2 }
FComPort := pnCOM2;
{ 9600 bauds }
FComPortBaudRate := br9600;
{ 8 data bits }
FComPortDataBits := db8BITS;
{ 1 stop bit }
FComPortStopBits := sb1BITS;
{ no parity }
FComPortParity := ptNONE;
{ No hardware handshaking but RTS on }
FComPortHwHandshaking := hhNONERTSON;
{ No software handshaking }
FComPortSwHandshaking := shNONE;
{ Input buffer of 2048 bytes }
FComPortInBufSize := 2048;
{ Output buffer of 2048 bytes }
FComPortOutBufSize := 2048;
{ Don't pack data }
FPacketSize := -1;
{ Packet timeout disabled }
FPacketTimeout := -1;
{ Discard incomplete packets }
FPacketMode := pmDiscard;
{ Poll COM port every 50ms }
FComPortPollingDelay := 50;
{ Output timeout of 500ms }
FOutputTimeout := 500;
{ Timeout for ReadData(), 200ms }
FInputTimeout := 200;
{ DTR high on connect }
FEnableDTROnOpen := true;
{ Time not valid }
FFirstByteOfPacketTime := DWORD(-1);
{ Don't check of off-line devices }
FCkLineStatus := false;
{ Init number of RX polling timer pauses - not paused }
FRXPollingPauses := 0;
{ Temporary buffer for received data }
GetMem( FTempInBuffer, FComPortInBufSize );
{ Allocate a window handle to catch timer's notification messages }
if not (csDesigning in ComponentState) then
FNotifyWnd := AllocateHWnd( TimerWndProc );
end;

destructor TCommPortDriver.Destroy;
begin
{ Be sure to release the COM port }
Disconnect;
{ Free the temporary buffer }
FreeMem( FTempInBuffer, FComPortInBufSize );
{ Destroy the timer's window }
if not (csDesigning in ComponentState) then
DeallocateHWnd( FNotifyWnd );
inherited Destroy;
end;

{ The COM port handle made public and writeable.
This lets you connect to external opened com port.
Setting ComPortHandle to 0 acts as Disconnect. }
procedure TCommPortDriver.SetComHandle( Value: THANDLE );
begin
{ If same COM port then do nothing }
if FComPortHandle = Value then
exit;
{ If value is $FFFFFFFF then stop controlling the COM port
without closing in }
if Value = $FFFFFFFF then
begin
if Connected then
{ Stop the timer }
if Connected then
KillTimer( FNotifyWnd, 1 );
{ No more connected }
FComPortHandle := 0;
end
else
begin
{ Disconnect }
Disconnect;
{ If Value is = 0 then exit now }
{ (ComPortHandle := 0 acts as Disconnect) }
if Value = 0 then
exit;

{ Set COM port handle }
FComPortHandle := Value;

{ Start the timer (used for polling) }
SetTimer( FNotifyWnd, 1, FComPortPollingDelay, nil );
end;
end;

procedure TCommPortDriver.SetComPort( Value: TComPortNumber );
begin
{ Be sure we are not using any COM port }
if Connected then
exit;
{ Change COM port }
FComPort := Value;
end;

procedure TCommPortDriver.SetComPortBaudRate( Value: TComPortBaudRate );
begin
{ Set new COM speed }
FComPortBaudRate := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortDataBits( Value: TComPortDataBits );
begin
{ Set new data bits }
FComPortDataBits := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortStopBits( Value: TComPortStopBits );
begin
{ Set new stop bits }
FComPortStopBits := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortParity( Value: TComPortParity );
begin
{ Set new parity }
FComPortParity := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortHwHandshaking( Value: TComPortHwHandshaking );
begin
{ Set new hardware handshaking }
FComPortHwHandshaking := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortSwHandshaking( Value: TComPortSwHandshaking );
begin
{ Set new software handshaking }
FComPortSwHandshaking := Value;
{ Apply changes }
if Connected then
ApplyCOMSettings;
end;

procedure TCommPortDriver.SetComPortInBufSize( Value: word );
begin
{ Do nothing if connected }
if Connected then
exit;
{ Free the temporary input buffer }
FreeMem( FTempInBuffer, FComPortInBufSize );
{ Set new input buffer size }
FComPortInBufSize := Value;
{ Allocate the temporary input buffer }
GetMem( FTempInBuffer, FComPortInBufSize );
{ Adjust the RX packet size }
SetPacketSize( FPacketSize );
end;

procedure TCommPortDriver.SetComPortOutBufSize( Value: word );
begin
{ Do nothing if connected }
if Connected then
exit;
{ Set new output buffer size }
FComPortOutBufSize := Value;
end;

procedure TCommPortDriver.SetPacketSize( Value: smallint );
begin
{ PackeSize = -1 if data isn't to be 'packetized' }
if Value < 1 then
Value := -1
{ If the PacketSize if greater than then RX buffer size then
increase the RX buffer size }
else if Value > FComPortInBufSize then
FComPortInBufSize := Value * 2;
FPacketSize := Value;
end;

procedure TCommPortDriver.SetPacketTimeout( Value: integer );
begin
{ PacketTimeout = -1 if packet timeout is to be disabled }
if Value < 1 then
Value := -1
{ PacketTimeout cannot be less than polling delay + some extra ms }
else if Value < FComPortPollingDelay then
Value := FComPortPollingDelay + 150;
FPacketTimeout := Value;
end;

procedure TCommPortDriver.SetComPortPollingDelay( Value: word );
begin
{ If new delay is not equal to previous value... }
if Value <> FComPortPollingDelay then
begin
{ Stop the timer }
if Connected then
KillTimer( FNotifyWnd, 1 );
{ Store new delay value }
FComPortPollingDelay := Value;
{ Restart the timer }
if Connected then
SetTimer( FNotifyWnd, 1, FComPortPollingDelay, nil );
{ Adjust the packet timeout }
SetPacketTimeout( FPacketTimeout );
end;
end;

const
Win32BaudRates: array[br110..br115200] of DWORD =
( CBR_110, CBR_300, CBR_600, CBR_1200, CBR_2400, CBR_4800, CBR_9600,
CBR_14400, CBR_19200, CBR_38400, CBR_56000, CBR_57600, CBR_115200
{,CRB_128000, CBR_256000} );

const
dcb_Binary = $00000001;
dcb_ParityCheck = $00000002;
dcb_OutxCtsFlow = $00000004;
dcb_OutxDsrFlow = $00000008;
dcb_DtrControlMask = $00000030;
dcb_DtrControlDisable = $00000000;
dcb_DtrControlEnable = $00000010;
dcb_DtrControlHandshake = $00000020;
dcb_DsrSensivity = $00000040;
dcb_TXContinueOnXoff = $00000080;
dcb_OutX = $00000100;
dcb_InX = $00000200;
dcb_ErrorChar = $00000400;
dcb_NullStrip = $00000800;
dcb_RtsControlMask = $00003000;
dcb_RtsControlDisable = $00000000;
dcb_RtsControlEnable = $00001000;
dcb_RtsControlHandshake = $00002000;
dcb_RtsControlToggle = $00003000;
dcb_AbortOnError = $00004000;
dcb_Reserveds = $FFFF8000;

{ Apply COM settings }
procedure TCommPortDriver.ApplyCOMSettings;
var dcb: TDCB;
begin
{ Do nothing if not connected }
if not Connected then
exit;

{ ** Setup dcb (Device Control Block) fields ****************************** }

{ Clear all }
fillchar( dcb, sizeof(dcb), 0 );
{ dcb structure size }
dcb.DCBLength := sizeof(dcb);
{ Baud rate to use }
dcb.BaudRate := Win32BaudRates[ FComPortBaudRate ];
{ Set fBinary: Win32 does not support non binary mode transfers
(also disable EOF check) }
dcb.Flags := dcb_Binary;
{ Enables the DTR line when the device is opened and leaves it on }
if EnableDTROnOpen then
dcb.Flags := dcb.Flags or dcb_DtrControlEnable;
{ Kind of hw handshaking to use }
case FComPortHwHandshaking of
{ No hardware handshaking }
hhNONE:;
{ No hardware handshaking but set RTS high and leave it high }
hhNONERTSON:
dcb.Flags := dcb.Flags or dcb_RtsControlEnable;
{ RTS/CTS (request-to-send/clear-to-send) hardware handshaking }
hhRTSCTS:
dcb.Flags := dcb.Flags or dcb_OutxCtsFlow or dcb_RtsControlHandshake;
end;
{ Kind of sw handshaking to use }
case FComPortSwHandshaking of
{ No software handshaking }
shNONE:;
{ XON/XOFF software handshaking }
shXONXOFF:
dcb.Flags := dcb.Flags or dcb_OutX or dcb_InX;
end;
{ Set XONLim: specifies the minimum number of bytes allowed in the input
buffer before the XON character is sent (or CTS is set). }
if (GetWinPlatform = 'WNT') and (GetWinVersion >= $00040000) then
begin
{ WinNT 4.0 + Service Pack 3 needs XONLim to be less than or
equal to 4096 bytes. Win95 doesn't have such limit. }
if FComPortInBufSize div 4 > 4096 then
dcb.XONLim := 4096
else
dcb.XONLim := FComPortInBufSize div 4;
end
else
dcb.XONLim := FComPortInBufSize div 4;
{ Specifies the maximum number of bytes allowed in the input buffer before
the XOFF character is sent (or CTS is set low). The maximum number of bytes
allowed is calculated by subtracting this value from the size, in bytes, of
the input buffer. }
dcb.XOFFLim := dcb.XONLim;
{ How many data bits to use }
dcb.ByteSize := 5 + ord(FComPortDataBits);
{ Kind of parity to use }
dcb.Parity := ord(FComPortParity);
{ How many stop bits to use }
dcb.StopBits := ord(FComPortStopbits);
{ XON ASCII char - DC1, Ctrl-Q, ASCII 17}
dcb.XONChar := #17;
{ XOFF ASCII char - DC3, Ctrl-S, ASCII 19}
dcb.XOFFChar := #19;

{ Apply new settings }
SetCommState( FComPortHandle, dcb );
{ Flush buffers }
FlushBuffers( true, true );
{ Setup buffers size }
SetupComm( FComPortHandle, FComPortInBufSize, FComPortOutBufSize );
end;

function TCommPortDriver.Connect: boolean;
var comName: string;
tms: TCOMMTIMEOUTS;
begin
{ Do nothing if already connected }
Result := Connected;
if Result then
exit;
{ Open the COM port }
SysUtils.FmtStr( comName, '\\.\COM%-d', [1+ord(FComPort)] );
FComPortHandle := CreateFile(
pchar(comName),
GENERIC_READ or GENERIC_WRITE,
0, { Not shared }
nil, { No security attributes }
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL,
0 { No template }
) ;
Result := Connected;
if not Result then
exit;
{ Apply settings }
ApplyCOMSettings;
{ Set ReadIntervalTimeout: Specifies the maximum time, in milliseconds,
allowed to elapse between the arrival of two characters on the
communications line.
We disable timeouts because we are polling the com port! }
tms.ReadIntervalTimeout := 1;
{ Set ReadTotalTimeoutMultiplier: Specifies the multiplier, in milliseconds,
used to calculate the total time-out period for read operations. }
tms.ReadTotalTimeoutMultiplier := 0;
{ Set ReadTotalTimeoutConstant: Specifies the constant, in milliseconds,
used to calculate the total time-out period for read operations. }
tms.ReadTotalTimeoutConstant := 1;
{ Set WriteTotalTimeoutMultiplier: Specifies the multiplier, in milliseconds,
used to calculate the total time-out period for write operations. }
tms.WriteTotalTimeoutMultiplier := 0;
{ Set WriteTotalTimeoutConstant: Specifies the constant, in milliseconds,
used to calculate the total time-out period for write operations. }
tms.WriteTotalTimeoutConstant := 1;
{ Apply timeouts }
SetCommTimeOuts( FComPortHandle, tms );
{ Start the timer (used for polling) }
SetTimer( FNotifyWnd, 1, FComPortPollingDelay, nil );
end;

procedure TCommPortDriver.Disconnect;
begin
if Connected then
begin
{ Stop the timer (used for polling) }
KillTimer( FNotifyWnd, 1 );
{ Release the COM port }
CloseHandle( FComPortHandle );
{ No more connected }
FComPortHandle := 0;
end;
end;

{ Returns true if connected }
function TCommPortDriver.Connected: boolean;
begin
Result := FComPortHandle > 0;
end;

{ Returns CTS, DSR, RING and RLSD (CD) signals status }
function TCommPortDriver.GetLineStatus: TComPortLineStatusSet;
var dwS: DWORD;
begin
Result := [];
if not Connected then
exit;
{ Retrieves modem control-register values.
The function fails if the hardware does not support the control-register
values. }
if not GetCommModemStatus( FComPortHandle, dwS ) then
exit;
if dwS and MS_CTS_ON <> 0 then Result := Result + [lsCTS];
if dwS and MS_DSR_ON <> 0 then Result := Result + [lsDSR];
if dwS and MS_RING_ON <> 0 then Result := Result + [lsRING];
if dwS and MS_RLSD_ON <> 0 then Result := Result + [lsRLSD];
end;

{ Returns true if polling has not been paused }
function TCommPortDriver.IsPolling: boolean;
begin
Result := FRXPollingPauses <= 0;
end;

{ Pauses polling }
procedure TCommPortDriver.PausePolling;
begin
{ Inc. RX polling pauses counter }
inc( FRXPollingPauses );
end;

{ Re-starts polling (after pause) }
procedure TCommPortDriver.ContinuePolling;
begin
{ Dec. RX polling pauses counter }
dec( FRXPollingPauses );
end;

{ Flush rx/tx buffers }
procedure TCommPortDriver.FlushBuffers( inBuf, outBuf: boolean );
var dwAction: DWORD;
begin
{ Do nothing if not connected }
if not Connected then
exit;
{ Flush the RX data buffer }
dwAction := 0;
if outBuf then
dwAction := dwAction or PURGE_TXABORT or PURGE_TXCLEAR;
{ Flush the TX data buffer }
if inBuf then
dwAction := dwAction or PURGE_RXABORT or PURGE_RXCLEAR;
PurgeComm( FComPortHandle, dwAction );
{ Used by the RX packet mechanism }
FFirstByteOfPacketTime := DWORD(-1);
end;

{ Returns number of received bytes in the RX buffer }
function TCommPortDriver.CountRX: integer;
var stat: TCOMSTAT;
errs: DWORD;
begin
{ Do nothing if port has not been opened }
Result := 65535;
if not Connected then
exit;
{ Get count }
ClearCommError( FComPortHandle, errs, @stat );
Result := stat.cbInQue;
end;

{ Returns the output buffer free space or 65535 if not connected }
function TCommPortDriver.OutFreeSpace: word;
var stat: TCOMSTAT;
errs: DWORD;
begin
if not Connected then
Result := 65535
else
begin
ClearCommError( FComPortHandle, errs, @stat );
Result := FComPortOutBufSize - stat.cbOutQue;
end;
end;

{ Sends binary data. Returns number of bytes sent. Timeout overrides
the value specifiend in the OutputTimeout property }
function TCommPortDriver.SendDataEx( DataPtr: pchar; DataSize, Timeout: UINT ): UINT;
var nToSend, nSent: dword;
t1: DWORD;
begin
{ Do nothing if port has not been opened }
Result := 0;
if not Connected then
exit;
{ Current time }
t1 := GetTickCount;
{ Loop until all data sent or timeout occurred }
while DataSize > 0 do
begin
{ Get TX buffer free space }
nToSend := OutFreeSpace;
{ If output buffer has some free space... }
if nToSend > 0 then
begin
{ Check signals }
if FCkLineStatus and (GetLineStatus = []) then
exit;
{ Don't send more bytes than we actually have to send }
if nToSend > DataSize then
nToSend := DataSize;
{ Send }
WriteFile(FComPortHandle, DataPtr^, nToSend, nSent, nil );
nSent := abs( nSent );
if nSent > 0 then
begin
{ Update number of bytes sent }
Result := Result + nSent;
{ Decrease the count of bytes to send }
DataSize := DataSize - nSent;
{ Inc. data pointer }
DataPtr := DataPtr + nSent;
{ Get current time }
t1 := GetTickCount;
{ Continue. This skips the time check below (don't stop
trasmitting if the Timeout is set too low) }
continue;
end;
end;
{ Buffer is full. If we are waiting too long then exit }
if (GetTickCount-t1) > Timeout then
exit;
end;
end;

{ Send data (breaks the data in small packets if it doesn't fit in the output
buffer) }
function TCommPortDriver.SendData( DataPtr: pointer; DataSize: UINT ): UINT;
begin
Result := SendDataEx( DataPtr, DataSize, FOutputTimeout );
end;

{ Sends a byte. Returns true if the byte has been sent }
function TCommPortDriver.SendByte( Value: byte ): boolean;
begin
Result := SendData( @Value, 1 ) = 1;
end;

{ Sends a char. Returns true if the char has been sent }
function TCommPortDriver.SendChar( Value: char ): boolean;
begin
Result := SendData( @Value, 1 ) = 1;
end;

{ Sends a pascal string (NULL terminated if $H+ (default)) }
function TCommPortDriver.SendString( s: string ): boolean;
var len: UINT;
begin
len := length( s );
{$IFOPT H+} { New syle pascal string (NULL terminated) }
Result := SendData( pchar(s), len ) = len;
{$ELSE} { Old style pascal string (s[0] = length) }
Result := SendData( pchar(@s[1]), len ) = len;
{$ENDIF}
end;

{ Sends a C-style string (NULL terminated) }
function TCommPortDriver.SendZString( s: pchar ): boolean;
var len: UINT;
begin
len := strlen( s );
Result := SendData( s, len ) = len;
end;

{ Reads binary data. Returns number of bytes read }
function TCommPortDriver.ReadData( DataPtr: pchar; MaxDataSize: UINT ): UINT;
var nToRead, nRead: dword;
t1: DWORD;
begin
{ Do nothing if port has not been opened }
Result := 0;
if not Connected then
exit;
{ Pause polling }
PausePolling;
{ Current time }
t1 := GetTickCount;
{ Loop until all requested data read or timeout occurred }
while MaxDataSize > 0 do
begin
{ Get data bytes count in RX buffer }
nToRead := CountRX;
{ If input buffer has some data... }
if nToRead > 0 then
begin
{ Don't read more bytes than we actually have to read }
if nToRead > MaxDataSize then
nToRead := MaxDataSize;
{ Read }
ReadFile( FComPortHandle, DataPtr^, nToRead, nRead, nil );
{ Update number of bytes read }
Result := Result + nRead;
{ Decrease the count of bytes to read }
MaxDataSize := MaxDataSize - nRead;
{ Inc. data pointer }
DataPtr := DataPtr + nRead;
{ Get current time }
t1 := GetTickCount;
{ Continue. This skips the time check below (don't stop
reading if the FInputTimeout is set too low) }
continue;
end;
{ Buffer is empty. If we are waiting too long then exit }
if (GetTickCount-t1) > FInputTimeout then
break;
end;
{ Continue polling }
ContinuePolling;
end;

{ Reads a byte. Returns true if the byte has been read }
function TCommPortDriver.ReadByte( var Value: byte ): boolean;
begin
Result := ReadData( @Value, 1 ) = 1;
end;

{ Reads a char. Returns true if char has been read }
function TCommPortDriver.ReadChar( var Value: char ): boolean;
begin
Result := ReadData( @Value, 1 ) = 1;
end;

{ Set DTR line high (onOff=TRUE) or low (onOff=FALSE).
You must not use HW handshaking. }
procedure TCommPortDriver.ToggleDTR( onOff: boolean );
const funcs: array[boolean] of integer = (CLRDTR,SETDTR);
begin
if Connected then
EscapeCommFunction( FComPortHandle, funcs[onOff] );
end;

{ Set RTS line high (onOff=TRUE) or low (onOff=FALSE).
You must not use HW handshaking. }
procedure TCommPortDriver.ToggleRTS( onOff: boolean );
const funcs: array[boolean] of integer = (CLRRTS,SETRTS);
begin
if Connected then
EscapeCommFunction( FComPortHandle, funcs[onOff] );
end;

{ COM port polling proc }
procedure TCommPortDriver.TimerWndProc( var msg: TMessage );
var nRead, nToRead, dummy: UINT;
comStat: TCOMSTAT;
begin
if (msg.Msg = WM_TIMER) and Connected then
begin
{ Do nothing if RX polling has been paused }
if FRXPollingPauses > 0 then
exit;
{ If PacketSize is > 0 then raise the OnReceiveData event only if the RX
buffer has at least PacketSize bytes in it. }
ClearCommError( FComPortHandle, dummy, @comStat );
if FPacketSize > 0 then
begin
{ Complete packet received ? }
if comStat.cbInQue >= FPacketSize then
begin
repeat
{ Read the packet and pass it to the app }
nRead := 0;
if ReadFile( FComPortHandle, FTempInBuffer^, FPacketSize, nRead, nil ) then
if (nRead <> 0) and Assigned(FComPortReceivePacket) then
FComPortReceivePacket( Self, FTempInBuffer, nRead );
{ Adjust time }
if comStat.cbInQue >= FPacketSize then
FFirstByteOfPacketTime := FFirstByteOfPacketTime +
DelayForRX( FComPortBaudRate, FPacketSize );
comStat.cbInQue := comStat.cbInQue - FPacketSize;
if comStat.cbInQue = 0 then
FFirstByteOfPacketTime := DWORD(-1);
until comStat.cbInQue < FPacketSize;
{ Done }
exit;
end;
{ Handle packet timeouts }
if (FPacketTimeout > 0) and (FFirstByteOfPacketTime <> DWORD(-1)) and
(GetTickCount - FFirstByteOfPacketTime > FPacketTimeout) then
begin
nRead := 0;
{ Read the "incomplete" packet }
if ReadFile( FComPortHandle, FTempInBuffer^, comStat.cbInQue, nRead, nil ) then
{ If PacketMode is not pmDiscard then pass the packet to the app }
if (FPacketMode <> pmDiscard) and (nRead <> 0) and Assigned(FComPortReceivePacket) then
FComPortReceivePacket( Self, FTempInBuffer, nRead );
{ Restart waiting for a packet }
FFirstByteOfPacketTime := DWORD(-1);
{ Done }
exit;
end;
{ Start time }
if (comStat.cbInQue > 0) and (FFirstByteOfPacketTime = DWORD(-1)) then
FFirstByteOfPacketTime := GetTickCount;
{ Done }
exit;
end;

{ Standard data handling }
nRead := 0;
nToRead := comStat.cbInQue;
if (nToRead > 0) and ReadFile( FComPortHandle, FTempInBuffer^, nToRead, nRead, nil ) then
if (nRead <> 0) and Assigned(FComPortReceiveData) then
FComPortReceiveData( Self, FTempInBuffer, nRead );
end
{ Let Windows handle other messages }
else
Msg.Result := DefWindowProc( FNotifyWnd, Msg.Msg, Msg.wParam, Msg.lParam ) ;
end;

procedure Register;
begin
{ Register this component and show it in the 'System' tab
of the component palette }
RegisterComponents('X', [TCommPortDriver]);
end;

end.

Nemusel si to sem cele kopirovat, stacil by aj link... :roll:

diky za pomoc,
jak to tam mam naimportovat a jak pouzivat? :-)
Nemate nejake tutorialy o Delphi celkove?

Citace:

---

Původně odeslal mudboy

diky za pomoc,
jak to tam mam naimportovat a jak pouzivat? :-)
Nemate nejake tutorialy o Delphi celkove?

---

na delphi urcite serial na zive.cz, :arrow: http://www.zive.cz/h/Programovani/default.asp?CAI=2091

Citace:

---

Původně odeslal Rainbow

Nemusel si to sem cele kopirovat, stacil by aj link... :roll:

---

Sorry, ale byl jsem desne linej. :oops:

@zikurat: diky moc, to je presne ono :D

Chtel bych se zeptat, mam HW, kteremu se pres seriak posle AT prikaz a on zacne posilat do pc data.
V hyperterminalu pod win to jde, ale ted nevim, co vse mam nastavit v komponente v Delphi, aby to fungovalo stejne...
Cili aby program poslal inicializacni znak na seriak (pravdepodobne #13, t.j. CR znak),pak poslal AT prikaz a na zaver zacal prijimat data... ty uz pak potecou porad.
Mam zapinat HW rizeni toku?
Diky vsem za napady

Citace:

---

Původně odeslal mudboy

Chtel bych se zeptat, mam HW, kteremu se pres seriak posle AT prikaz a on zacne posilat do pc data.
V hyperterminalu pod win to jde, ale ted nevim, co vse mam nastavit v komponente v Delphi, aby to fungovalo stejne...
Cili aby program poslal inicializacni znak na seriak (pravdepodobne #13, t.j. CR znak),pak poslal AT prikaz a na zaver zacal prijimat data... ty uz pak potecou porad.
Mam zapinat HW rizeni toku?
Diky vsem za napady

---

Jestli pouzivas tu komponentu co jsem sem tak strasnym zpusobem postnul, tak to funguje tak ze: napriklad se ti ta komponenta jmenuje C
C.Connect; // pripojeni na com port
C.SendString('aaaa'); // odeslani stringoveho prikazu

Potom prijimani dat je na udalost OnReceiveData

var
po : pChar;
st: string;
begin
if DataSize > 0 then
begin
Po:=DataPtr;
SetLength(St,DataSize);
Move(po^,PChar(st)^,DataSize);
// v st je to co prislo na com port

Prosim pomozte me ta komponenta nejde nainstalovat mám Delphi 7 enterprise, dám..Component..install Component...Unit File name vyberu ComDrv32..OK..ok...install...a pak to hodi spousty varovaní a tuhle chybku...
[Error] ComDrv32.pas(611): Types of actual and formal var parameters
must be identical

nevite co s tim? jsem ohledne delphy lama