Potřeboval bych dostat Acronis Loader na USB flashku a nabootovat z něj. Nikde ale nemůžu najít, jak to udělat.
Je to vůbec možné?
Printable View
Potřeboval bych dostat Acronis Loader na USB flashku a nabootovat z něj. Nikde ale nemůžu najít, jak to udělat.
Je to vůbec možné?
Muzes vyzkouset tento postup, ktery funguje pro Windows 7. Je tam popsano preneseni isa na flashku, ale podle mne to takto nejde aplikovat obecne na cokoli a klicove je, zdali samotna aplikace umi pracovat s usb.
http://www.elmajdal.net/Win7/Install...USB_Stick.aspx
Citace:
First we will need to mount the content of the Windows 7 DVD ( or the ISO file ) to the external Flash Memory. Open Command Prompt ( cmd ) and write the following commands:
- To open Command Prompt , click on Start > All Programs > Accessories > Command Prompt
- Type diskpart
- Type list disk , with this command , all hard disk attached to your machine will be listed. My machine internal Hard disk is 75 GB and my flash memory is 8 GB, as shown below :
- My USB Stick sown above with a Disk ### as Disk 1, so type select Disk 1
- Type clean, this will clear the configuration information, or all information, off the disk.
- Then type create partition primary
- select the partition by typing : select partition 1
- Set it as active by typing : active, this will mark the current basic partition as an active boot partition.
- Format the partition with a Fat32 File System by typing : format fs=fat32
- Assign a letter to the flash disk, type assign letter=v , where v is a free drive letter
- Exit Diskpart by typing : exit
- Now we need to copy the Windows 7 Installation files to the USB Stick.
Type xcopy d:\*.* /s/e/f v:
where d is the drive letter of the DVD drive that holds the Windows 7 DVD, or the Drive letter of the path that you are saving in it the ISO file of Windows 7, and v is the drive letter that you assigned to the external USB Stick in the previous step.
- Plug the USB stick to the machine you want to install Windows 7 to, and reboot/or start it up. Make sure that USB booting is set in the BIOS prior to your internal hard disk.
Našel jsem nějaké i jiné postupy, ale stejně to nešlo.
Nakonec jsem obětoval jedno DVD a už klonuji disk :D
Mám 8GB flashku AData C802. Zkoušel jsem různé postupy, ale nikdy se mi nepodařilo s ní cokoliv provést, u tohoto postupu jsem skončil již v partdisku, kdy nenašel flešku. Ta však normálně v systému je, lze z ní a na ni kopírovat.. vše.. je chyba u flešky, USB, nějakém ovladači?? používám XP Pro SP3, snažím se udělat boot flash disk s win7
no tak toto som skusal. islo mi to vpohode ale som si povedal ze teraz este nebudem preinstalovat system tak som resetol komp kde bol zastrceny boot usb. nabehol som do windowsu kde mi nesiel zobrazit tento pocitac(ani winamp sa mi nespustil). tak som vytiahol usb a uz vsetko islo vpohode.
ked som znovu skusal dostat sa do instalacky cez to boot usb uz to neslo.
tak som skusil dat ho formatovat lenze islo to strasne pomaly tak som to stopol.
stym usb som uz skusal kadeco ale proste nejde ani formatovat - nakonci mi vzdy vypluje chybu. nejde ani otvorit. skusal som aj v disk managemente ani tam to nedoformatuje. mam to brat tak ze uz je mrtve?
vyzerá to tak, že si ho vytiahol za behu a to nerobí dobrotu. skús ju naformátovať nejakou utilitou určenou pre karty a flashky (napr. HP disk boot utility)
Nebo zkus Gparted, ten je většinou úspěšnej.
akoze toto je neuveritelne ale ono sa to opravilo samo.
formatoval som to asi 100krat tym istym sposobom a proste zrazu to islo :D
fakt tomu nerozumiem ale ta flashka vyzera ze ide :))