Daemon Tools 4 - OUT!

Printable View

15.11.2005, 07:03
Umbro

Daemon Tools 4 - OUT!

Homepage:
http://www.daemon-tools.cc/

Download:
http://home.so-net.net.tw/vader/dtools/daemon400.exe
(je to celkem pretizene, takze to haze er404, ale je to tam, je treba zkouset)

Release Notes:
http://www.daemon-tools.cc/notes.html
15.11.2005, 09:23
ace960

mirror

http://www.ggmania.com/?smsid=20188
local us mirror mi isiel hned
17.11.2005, 00:26
ace960

warning

ak mozem poradit tak si tuto verziu neinstalujte
nejdem sa rozpisovat, chytil som asi vsetky problemy co sa na DT fore popisane
17.11.2005, 00:53
Ssnake

Re: warning

Citace:

Původně odeslal ace

ak mozem poradit tak si tuto verziu neinstalujte
nejdem sa rozpisovat, chytil som asi vsetky problemy co sa na DT fore popisane

taky s tim mam problemy, cili navrat k 3.47
17.11.2005, 12:00
Anduril

Jaké máte problémy?
Mně to funguje myslím v pohodě.
17.11.2005, 12:10
Ssnake

Citace:

Původně odeslal Anduril

Jaké máte problémy?
Mně to funguje myslím v pohodě.

me to hazelo errory pri pokusu otevrit image, jednou to slo, pak zas ne a ne a ne...s 3.47 zase v poho
17.11.2005, 13:08
Anduril

Aha, no moc jsem to jeste nepouzival, ale mne to zase funguje lip..3.47 mi nacetlo image az kdyz jsem na tu "mechaniku" pristoupil z Total Commandera..jinak se to tvarilo, ze tam nic namountovane neni..U 4.0 bez problemu..
17.11.2005, 14:48
ace960

problemy suvisia s tym, co mas vsetko v systeme, starforce ochrana apod. cize nemusis narazit na ziadne alebo ich mozes chytit viac

po instalacii dt4 som chytil bsod (scsiport) - konflikt so starforce
po prvom restarte to nehedzalo bsod ale neslo ich nastartovat
takisto ich neslo odinstalovat
po manualnom odstraneni (celkom "zabavne") som chcel hodit 3.47 a boli rozne problemy
bolo tam toho viac a na vsetko som nasiel riesenie tu http://www.daemon-tools.cc/dtcc/index.php, takze to nebol moj ojedinely problem
28.11.2005, 09:47
.:::iGor:::.

DAEMON Tools 4.00 X64

DAEMON Tools 4.01 x64

http://www.daemon-tools.cc/dtcc/down...Download&id=83
04.07.2006, 15:59
Masster

Re: Daemon Tools 4 - OUT!

Citace:

Dear Community,

we updated latest DaemonTools (V4.0.3) with latest available SPTD-Driver (V1.25)!

The new SPTD fixes several critical issues, a problem with McAfee-Virus-Scan and VistaBeta2-Problems!
The X64-Version also fixes the latest issues between SPTD introduced by Microsoft-patch KB 914784

We strongly recommend to upgrade to this version, several internal changes increased (hopefully)
system-stability!

x86 verze
x64 verze
26.09.2006, 11:54
Masster

Re: Daemon Tools 4 - OUT!

DAEMON TOOLS V4.0.6 released!

Citace:

Changelog:

- randomizer (partially also drivernames) enhanced
- some AntiBlacklist countermeasures
- bugfixes
- full vista support

SPTD:

- compatibility problems fixed (Tagês, Perfectdisk, MacDrive)

Download
19.11.2006, 18:58
Masster

Re: Daemon Tools 4 - OUT!

DAEMON Tools V4.08 RELEASED!

Citace:

This new version supports silent setup now.
Example: daemon408-x86.exe /S /D=F:\Some Folder\
Note that no quotes must be used in installation path even if name has spaces.
All critical errros will be still displayed no matter silent or not.
Case of parameters is important, eg. /s will not work.
Reboot prompt will not be shown.

If SPTD was not present then it will be silently installed but
PC will not be rebooted - it is assumed the administrator who
performs unattended install will take care of reboot and restarts DT setup after reboot in this case.

It is best first to use standalone SPTD installer and install it silently this way:

sptdinst-x86.exe add /q

Note: SPTD 1.37 will not display debugger warning dialog anymore. They left this info in EULA only as this message confuses many users and also not "silent setup friendly".
Standalone SPTD 1.37 installer is released by Duplex Secure officially and can be obtained at their website http://www.duplexsecure.com

Download
27.06.2007, 12:39
Masster

Re: Daemon Tools 4 - OUT!

DAEMON Tools Pro Released

Citace:

- an internet connection is necessary to use DT Pro and DT Pro is activated
via internet
- vIDE is not yet implemented, nevertheless it is planned to add it within
one of the next updates (and we already updated DT Pro twice since customer-release).
- full Tagês-capabilities already included
- up to 32 virtual SCSI-drives and with vIDE additional up to 2 additional drives
- customizable GUI
- full online-help
- fast read-engine
- full support at DAEMON Tools Customer-Supportboard
- already added language-support for english, german, french, italian and russian language
- regularly planned updates with not only bugfixes but also added features, several
addons are currently in development (like scanner)

http://www.daemon-tools.cc/dtcc/announcements.php