Este som nic nenainstaloval...

Mam MDK 10.0, oficial, z dvd Computera, je tam KDE 3.2. Je jasne, ze som zaciatocnik, ale ze to bude az take zufale som necakal. Nemozem nainstalovat ani Krusader (1.60.0-2mdk. i586 .rpm, predtym som skusal 1.30 mdk-mdk91.i586.rpm), vypisalo mi ze: niektore pozadovane baliky nie je mozne nainst. lebo chyba "libstdc++.so.6", ze ci s tym suhlasim. Tak som mu to doinstaloval, teraz pyta "libidn.so.11". Musim koli tomu reboot do XP, lebo v MDK nemozem nainstalovat ani Lucent modem, skusal som verziu driverov ltmodem-5.78d, vypisalo mi (pri kompilacii): "cant determine kernel version with uname -r". Verzia "DP56K_L 600 mi tiez nesla skompilovat. Pokusim sa dat sem ten log, vyzera to ze modem sa s Linuxom neraci (vo vsetkych verziach win od 98 po XP SP2 funguje). Ak ten modem nerozchodim, je to pre mna nepouzitelne (MDK). Vdaka za kazdu radu (a sorry za ten log, ale pre odbornikov to bude asi najvyrecnejsie)

Password:
[root@localhost exclusive]# cd..
[root@localhost home]# cd..
[root@localhost /]# cd mnt/floppy
[root@localhost floppy]# make
gcc -D__KERNEL__ -DMODULE -DLT_KER_24 -DNO_EEPROM -w -O2 -fomit-frame-pointer -I
/usr/src/linux/include -I/usr/src/linux-2.6.3-15mdk/include -I/usr/src/linux-2.
6.3/include -I/usr/src/linux-2.6/include -c -o ltmodem.a ltmodem.c
In file included from /usr/include/linux/cpumask.h:8,
from /usr/include/linux/sched.h:14,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/bitmap.h: In function `bitmap_shift_right':
/usr/include/linux/bitmap.h:85: error: `__shr_tmp' undeclared (first use in this
function)
/usr/include/linux/bitmap.h:85: error: (Each undeclared identifier is reported o
nly once
/usr/include/linux/bitmap.h:85: error: for each function it appears in.)
/usr/include/linux/bitmap.h: In function `bitmap_shift_left':
/usr/include/linux/bitmap.h:98: error: `__shl_tmp' undeclared (first use in this
function)
In file included from /usr/include/linux/sched.h:14,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/cpumask.h:10:5: missing binary operator before token "("
/usr/include/linux/cpumask.h:34:5: missing binary operator before token "("
In file included from /usr/include/asm/smp.h:18,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or directory
In file included from /usr/include/asm/smp.h:18,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/mpspec.h: At top level:
/usr/include/asm/mpspec.h:8: error: `MAX_MP_BUSSES' undeclared here (not in a fu
nction)
/usr/include/asm/mpspec.h:9: error: `MAX_MP_BUSSES' undeclared here (not in a fu
nction)
/usr/include/asm/mpspec.h:10: error: `MAX_MP_BUSSES' undeclared here (not in a f
unction)
/usr/include/asm/mpspec.h:12: error: `MAX_MP_BUSSES' undeclared here (not in a f
unction)
/usr/include/asm/mpspec.h:19: error: `MAX_APICS' undeclared here (not in a funct
ion)
/usr/include/asm/mpspec.h:20: error: `MAX_MP_BUSSES' undeclared here (not in a f
unction)
/usr/include/asm/mpspec.h:20: error: conflicting types for `mp_bus_id_to_type'
/usr/include/asm/mpspec.h:8: error: previous declaration of `mp_bus_id_to_type'
/usr/include/asm/mpspec.h:22: error: `MAX_IRQ_SOURCES' undeclared here (not in a
function)
/usr/include/asm/mpspec.h:24: error: `MAX_MP_BUSSES' undeclared here (not in a f
unction)
/usr/include/asm/mpspec.h:24: error: conflicting types for `mp_bus_id_to_pci_bus
'
/usr/include/asm/mpspec.h:12: error: previous declaration of `mp_bus_id_to_pci_b
us'
/usr/include/asm/mpspec.h:54: error: `MAX_APICS' undeclared here (not in a funct
ion)
/usr/include/asm/mpspec.h:54: error: variable-size type declared outside of any
function
In file included from /usr/include/asm/smp.h:20,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/io_apic.h:160: error: `MAX_IRQ_SOURCES' undeclared here (not in
a function)
/usr/include/asm/io_apic.h:160: error: conflicting types for `mp_irqs'
/usr/include/asm/mpspec.h:22: error: previous declaration of `mp_irqs'
In file included from /usr/include/asm/siginfo.h:4,
from /usr/include/linux/signal.h:7,
from /usr/include/linux/sched.h:24,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm-generic/siginfo.h:53: error: size of array `_pad' is too large
In file included from /usr/include/linux/gfp.h:4,
from /usr/include/linux/slab.h:15,
from /usr/include/linux/percpu.h:4,
from /usr/include/linux/sched.h:30,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/mmzone.h:333: error: parse error before '(' token
/usr/include/linux/mmzone.h:334: error: parse error before numeric constant
In file included from /usr/include/linux/irq.h:20,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/asm/irq.h:16:25: irq_vectors.h: No such file or directory
In file included from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/linux/irq.h:70: error: `NR_IRQS' undeclared here (not in a function )
In file included from /usr/include/linux/irq.h:72,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/asm/hw_irq.h:28: error: `NR_IRQ_VECTORS' undeclared here (not in a function)
/usr/include/asm/hw_irq.h:31: error: `NR_IRQS' undeclared here (not in a functio n)
make: *** [ltmodem.a] Error 1
[root@localhost floppy]# make install
./ltuninst
ERROR: Module ltserial does not exist in /proc/modules
ERROR: Module ltmodem does not exist in /proc/modules
make all
make[1]: Entering directory `/mnt/floppy'
gcc -D__KERNEL__ -DMODULE -DLT_KER_24 -DNO_EEPROM -w -O2 -fomit-frame-pointer -I/usr/src/linux/include -I/usr/src/linux-2.6.3-15mdk/include -I/usr/src/linux-2.6.3/include -I/usr/src/linux-2.6/include -c -o ltmodem.a ltmodem.c
In file included from /usr/include/linux/cpumask.h:8,
from /usr/include/linux/sched.h:14,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/bitmap.h: In function `bitmap_shift_right':
/usr/include/linux/bitmap.h:85: error: `__shr_tmp' undeclared (first use in this function)
/usr/include/linux/bitmap.h:85: error: (Each undeclared identifier is reported only once
/usr/include/linux/bitmap.h:85: error: for each function it appears in.)
/usr/include/linux/bitmap.h: In function `bitmap_shift_left':
/usr/include/linux/bitmap.h:98: error: `__shl_tmp' undeclared (first use in this function)
In file included from /usr/include/linux/sched.h:14,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/cpumask.h:10:5: missing binary operator before token "("
/usr/include/linux/cpumask.h:34:5: missing binary operator before token "("
In file included from /usr/include/asm/smp.h:18,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/mpspec.h:6:25: mach_mpspec.h: No such file or directory
In file included from /usr/include/asm/smp.h:18,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/mpspec.h: At top level:
/usr/include/asm/mpspec.h:8: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:9: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:10: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:12: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:19: error: `MAX_APICS' undeclared here (not in a function)
/usr/include/asm/mpspec.h:20: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:20: error: conflicting types for `mp_bus_id_to_type'
/usr/include/asm/mpspec.h:8: error: previous declaration of `mp_bus_id_to_type'
/usr/include/asm/mpspec.h:22: error: `MAX_IRQ_SOURCES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:24: error: `MAX_MP_BUSSES' undeclared here (not in a function)
/usr/include/asm/mpspec.h:24: error: conflicting types for `mp_bus_id_to_pci_bus'
/usr/include/asm/mpspec.h:12: error: previous declaration of `mp_bus_id_to_pci_bus'
/usr/include/asm/mpspec.h:54: error: `MAX_APICS' undeclared here (not in a function)
/usr/include/asm/mpspec.h:54: error: variable-size type declared outside of any function
In file included from /usr/include/asm/smp.h:20,
from /usr/include/linux/smp.h:13,
from /usr/include/linux/sched.h:22,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm/io_apic.h:160: error: `MAX_IRQ_SOURCES' undeclared here (not in a function)
/usr/include/asm/io_apic.h:160: error: conflicting types for `mp_irqs'
/usr/include/asm/mpspec.h:22: error: previous declaration of `mp_irqs'
In file included from /usr/include/asm/siginfo.h:4,
from /usr/include/linux/signal.h:7,
from /usr/include/linux/sched.h:24,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/asm-generic/siginfo.h:53: error: size of array `_pad' is too large
In file included from /usr/include/linux/gfp.h:4,
from /usr/include/linux/slab.h:15,
from /usr/include/linux/percpu.h:4,
from /usr/include/linux/sched.h:30,
from /usr/include/linux/module.h:9,
from ltmodem.c:22:
/usr/include/linux/mmzone.h:333: error: parse error before '(' token
/usr/include/linux/mmzone.h:334: error: parse error before numeric constant
In file included from /usr/include/linux/irq.h:20,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/asm/irq.h:16:25: irq_vectors.h: No such file or directory
In file included from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/linux/irq.h:70: error: `NR_IRQS' undeclared here (not in a function)
In file included from /usr/include/linux/irq.h:72,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/interrupt.h:11,
from ltmodem.c:27:
/usr/include/asm/hw_irq.h:28: error: `NR_IRQ_VECTORS' undeclared here (not in a function)
/usr/include/asm/hw_irq.h:31: error: `NR_IRQS' undeclared here (not in a function)
make[1]: *** [ltmodem.a] Error 1
make[1]: Leaving directory `/mnt/floppy'
make: *** [install] Error 2
[root@localhost floppy]#

a mas overene, ze ten modem neni pouze WINmodem(Softmodem, ci jak se tomu nadava), paklize ano, tak ani v linuxu jit nemuze ... potrebujes fullHW modem...

Jinak na MDK instaluj zasadne pres urpmi, resi zavyslosti, kdyz budes instalovat jednotlive balicky pres rpm, tak ti potrebne nedoinstaluje.

Ale tieto drivery by mali byt prave pre ten moj (je to PCI ?soft? modem - Microcom Deskporte Internal Lucent, stiahol som drivery aj zo stranky Microcomu, ale ked som ich skusal, vypisalo mi, ze tam chyba Makefile (myslim). Zda sa mi, ze uz som skusal instalovat aj cez URPMI, nieco len zbehlo a dalej sa nedialo nic. Btw, urpmi sa pouziva cez konzolu, graficky to asi nepojde? :?: Sorry, ide mi to akosi pomaly.

Pres ltmodem sem driv vyse zmineny modem pouzival, takze te muzu ujistit, ze jede :) Potrebujes ale na to zdrojaky jadra, ktere ti momentalne bezi, dale v jadre podporu ppp (jak se modul jmenuje to ted presne nevim), po kompilaci modemu bys mel mit moduly lt_modem a lt_serial. Jako zarizeni /dev/ttyLTO. Precti si readme k driveru a je to tam dost dobre popsany co bude vsechno potrebovat a tak.

nemas nahodou drivery pro 2.4.x radu ?

V readme sa pise, ze " makes 2.2 and 2.4 drivers depending on uname -r
2.4 drivers are built according to marco's patches with minor mods" (readme od driverov ver. 5.78d )
Pozeram, ze mam toho pred sebou asi este vela (zdrojaky, kompilacia jadra), idem teda citat podrobnejsie to readme, ci s toho zmudriem.

ty pouzivas jadro 2.6 ale ty drivery jsou pro serie 2.2 a 2.4. Takze si radsi stahni drivery pro verzi 2.6

lempour,

drivery pre jadro 2.6 nemozem nikde najst, vsade su len pre 2.2, 2.4. Este ma napada, pri boote je (tusim) moznost zaviest jadro 2.4, zeby som to skusil?

Jestli ti to nepojede s jadrem 2.4x, nejake balicky pro 2.6x jadro jsou tu - http://linmodems.technion.ac.il/pack...em/kernel-2.6/
Nevim, ale presne jake jadro je v mdk co mas, verze jadra toho ltmodemu a jadra ktery bootujes musi byt stejna.

Taky bude potreba nahrat odpovidajici zdrojaky jadra.

P.S. Je dobre hledat pres Google.

Zase som sa na chvilu dostal k Linuxu, ale zistil som len, ze som v nom strateny, nedari sa mi zohnat tie zdrojaky jadra (v Googli napr. "kernel source" a pod., ale nic zmysluplne som nenasiel) a neviem ani co s nimi, mam ich len rozbalit a nakopirovat - a kde presne? (asi do jadra, ale to je pre mna siroky pojem) Mrzia ma tie lamerske otazky, ale kym prestudujem napr. cely "Dokumentacny projekt" pri mojich moznostiach, tak sa asi k nicomu nedopracujem :-( . Mam verziu jadra 2.6.3.x (dufam, ze neklamem, teraz nie som doma), vsetky ovladace a pod., ktore nachadzam na nete su pre starsie verzie, som z toho tatar.
(Este som nestihol vyskusat nabootovat jadro 2.4, ako som pisal)

Citace:

---

Původně odeslal Tykoxo

Zase som sa na chvilu dostal k Linuxu, ale zistil som len, ze som v nom strateny, nedari sa mi zohnat tie zdrojaky jadra (v Googli napr. "kernel source" a pod., ale nic zmysluplne som nenasiel) a neviem ani co s nimi, mam ich len rozbalit a nakopirovat - a kde presne? (asi do jadra, ale to je pre mna siroky pojem) Mrzia ma tie lamerske otazky, ale kym prestudujem napr. cely "Dokumentacny projekt" pri mojich moznostiach, tak sa asi k nicomu nedopracujem :-( . Mam verziu jadra 2.6.3.x (dufam, ze neklamem, teraz nie som doma), vsetky ovladace a pod., ktore nachadzam na nete su pre starsie verzie, som z toho tatar.
(Este som nestihol vyskusat nabootovat jadro 2.4, ako som pisal)

---

Kasli na dokumentcni projeek, k MDK mas instalacni prirucku od bibriho.

tobe pomuze jako root napsat toto:

uname -a
urpmi kernel-source
pak si vyber zdrojeky dle toho co ti vypsalo uname -a

To vyzera slubne, zajtra to, dufam, vyskusam. Zatial vdaka vsetkym, este sa urcite ozvem. Ak som to dobre pochopil, uname -a mi vypise verzie zdrojakov, ktore potom podhodim Googlovi? Alebo su tie zdrojaky aj na instalacnom DVD? Majte so mnou prosim este chvilu strpenie. :idea:

The uname utility writes symbols representing one or more system charac-teristics to the standard output.

vice info man uname

uname -a vypoti nieco taketo:

Kód:

---

Linux pentium 2.6.12-pentium #5 Wed Aug 17 23:13:16 CEST 2005 i686 unknown unknown GNU/Linux

---

S Mandrake jadrom tam bude nieco ako 2.x.y.blablabla-mdk - a zdrojaky k tomu su bud na CD/DVD alebo sa daju stiahnut niekde od Mandrake - maju totiz to jadro upravene (oproti standardnemu z http://www.kernel.org).

Tak som zase prilis nepostupil,
uname -a mi vratilo zhruba to, co napisal Rainbow, ale co sa tyka urpmi kernel-source, ten os si z nejakeho dovodu mysli, ze bol nainstalovany z hda, hoci bol nainstalovany z hdc a hw konfiguraciu som medzitym nemenil. Hda je CDRW, je na primary master, ako slave je ten harddisk, kde je aj MDK (hdb), hdc je DVDRW - second. master. Ked napisem v konzole (root) urpmi kernel-source, otvori mi to tu cd napalovacku a vypise mi ze mam vlozit Mandrake DVD (alebo Computer??? DVD) do hda a stlacit enter. Uz som skusil pomocou cd.. premiestnit sa do adresara "cdrom2" (hdc), aj ma to tam presunulo a tam som spustil to urpmi..., ale stale ma to vyzyva na vlozenie inst. DVD do hda. Ako mu mam vysvetlit, ze prisiel na tento svet z hdc? :idea: Musim odpojit to cdrw?

Citace:

---

Původně odeslal Tykoxo

Tak som zase prilis nepostupil,
uname -a mi vratilo zhruba to, co napisal Rainbow, ale co sa tyka urpmi kernel-source, ten os si z nejakeho dovodu mysli, ze bol nainstalovany z hda, hoci bol nainstalovany z hdc a hw konfiguraciu som medzitym nemenil. Hda je CDRW, je na primary master, ako slave je ten harddisk, kde je aj MDK (hdb), hdc je DVDRW - second. master. Ked napisem v konzole (root) urpmi kernel-source, otvori mi to tu cd napalovacku a vypise mi ze mam vlozit Mandrake DVD (alebo Computer??? DVD) do hda a stlacit enter. Uz som skusil pomocou cd.. premiestnit sa do adresara "cdrom2" (hdc), aj ma to tam presunulo a tam som spustil to urpmi..., ale stale ma to vyzyva na vlozenie inst. DVD do hda. Ako mu mam vysvetlit, ze prisiel na tento svet z hdc? :idea: Musim odpojit to cdrw?

---

man urpmi-source

najdes tam urcite jak zadat cestu, odkud ma brat zdrojaky

Aha,
no, budem to moct vyskusat az v utorok, ale dufam, ze sa uz niekde dostanem, zatial vdaka za trpezlivost.