Nemate nekdo navod jak odemknout P4?
Printable View
Nemate nekdo navod jak odemknout P4?
ja chci taky :lol: ;D
to nema asi nigdo, teda pokud to zrovna neni ES ;)
Přesně tak, od dob Deschutes jádra PII se odemykat nedá.
To chce jenom malilinkatej srobovacek, malilinkatou pajku a kliku jaj hovado a samozremne mit strycka v intelu
PS: Nejde to ;D
Tohle by se mělo dát do FAQ. Prostě to nejde.
Tak to bohuzel opravdu nejde.
Omlouvam se, ale proste to muselo ven...:
NEJDE TO...!!! ;D ;D ;D
Urobil som z toho sticky thread keby to este niekoho zaujimalo.
2 rainbow meto zajima... de to teda? ;D
jsem nekde cetl ze NE ;DCitace:
Původně odeslal Hrochoslon
Ale kdyby se vam to nekomu podarilo, tak hned sem s tim !!! (nebo cislo na toho strycka) ;D ;D ;D
A nebo hromadu engineering samplu pro vsechny overclockery... :D
jit to musi, kdyz jsou IS odemcene, mozna by to podle Is udelat na seriovym :)
Zozen nejaky ES, potom rovnaky zamknuty procesor a mozes porovnavat.
Ale ani u ES nejde dát multiplikátor nahoru. To je taky důležité. Pouze jde snížit a odpovídajícím způsobem zvednout FSB. Takže je to prašť jako uhoď. :(
To neviem ci je to naozaj tak (taky procesor som este nemal) ale nasobic dole a FSB hore - to by bolo dobre napriklad na Tualatiny s vysokym nasobicom (1.4GHz).
Je to přesně tak, násobiče jdou u ES pouze směrem dolů. Měl jsem skoro rok P4 ES, tak to můžu potvrdit.Citace:
Původně odeslal Rainbow
Pkud se to někomu podaří, tak to je na nobellovku :lol:
Myslim ze kazdy kto chce hybat s nasobicom ide vzdy dole takze mne osobne by to stacilo a ostatnym asi tiez.Citace:
Původně odeslal Halen
Procesory radi ES som uz mal tu cest skusit jednalo sa o Celeron s Tualatin jadrom a nasobic isiel hore aj dole. Takze pokial niekto zohna CPU s ES radou tak nech si ho nepusti z ruky je to unikat.
Ani nie, kludne by som vymenil 21x162 za 17x200 :)Citace:
Původně odeslal Halen
jj, aj ja :-) a kludne by som vymenil aj 18*166 za 21*162 :wink:Citace:
Původně odeslal 555
Neviete kde zohnat toto: ?
http://www.obengware.com/uji/p42200.htm
Do you want the short answer, or the long answer?
The short answer is: You can’t do it.
The long answer is: Ever since August of 1998, Intel has locked the multipliers on the CPU’s. Why? To deter unscrupulous dealers who would overclock the CPU and sell it as a higher speed processor (and of course, sell it at the higher price.)
After fabrication and testing, the multiplier is locked on the die itself by using one-time programmable laser-cut fuses. Since this is all done prior to packaging, it would require removing the die from the packaging, and using very, very expensive Etching equipment to repair the fuse (not to mention a cleanroom environment). Basically, it would be completely impractical to attempt to unlock the multiplier.
Note that there are three states of multiplier:
Completely unlocked: Currently, only engineering samples are completely unlocked. Previously, Intel processors up to the Pentium Pro (with the exception of the Pentium MMX) were completely unlocked, in that there was no limit to the multiplier that could be applied.
Multiplier Limited: Pentium MMX and processors produced up until August 1998 were multiplier limited. They could use any multiplier UP TO their default multiplier. For example, a Pentium II 300MHz had a default multiplier of 4.5x. You could use any multiplier up to and including 4.5x, but not 5.0x or higher.
Multiplier Locked: All processors produced after August (week 30), 1998 are multiplier locked, in that the multiplier cannot be changed at all, regardless of motherboard settings.
Wingznut PEZ is a 0.13 micron Lithography Technician at Intel. He is not speaking for Intel Corp.
A co takhle dostat nejakyho manika z Intelu na nasi stranu... Nabidnout mu kseft, kde by jsme od Intelu koupili "X" procesoru a ten manik by nam poslal procaky ztazeny z linky driv nez by je zamkli. Obchod by normalne probehl a "oba tri" (dealer, Intel i my) by jsme byli spokojeni. :idea:
Co myslite?