5.1 zvuk v Mplayeru

[CompCrasher]

Jak to mam rozjet? Mam nejnovejsi Mplayer a MDK 9.1. popr. jake kodeky (ac3)--presny nazev. Proste chci, aby pri sledovani i 2 kanalovych filmu, cili stereo se basy ozyvaly v subwooferu a tak. Jako ve widlich :O tfuj, to je ale prirovnani

[wong]

tady je neco z dokumentace, treba ti to pomuze

2.2.2.1 Software AC3 decoding

This is the default decoder used for files with AC3 audio.

The AC3 decoder can create audio output mixes for 2, 4, or 6 speakers. When configured for 6 speakers, this decoder provides separate output of all the AC3 channels to the sound driver, allowing for full "surround sound" experience without the external AC3 decoder required to use the hwac3 codec.

Use the -channels option to select the number of output channels. Use -channels 2 for a stereo downmix. For a 4 channel downmix (Left Front, Right Front, Left Surround and Right Surround outputs), use -channels 4. In this case, any center channel will be mixed equally to the front channels. -channels 6 will output all the AC3 channels as they are encoded - in the order Left, Right, Left Surround, Right Surround, Center and LFE.

The default number of output channels is 2.

To use more than 2 output channels, you will need to use OSS, and have a sound card that supports the appropriate number of output channels via the SNDCTL_DSP_CHANNELS ioctl. An example of a suitable driver is emu10k1 (used by Soundblaster Live! cards) from August 2001 or newer (ALSA CVS is also supposed to work).
2.2.2.2 Hardware AC3 decoding

You need an AC3 capable sound card, with digital out (SP/DIF). The card's driver must properly support the AFMT_AC3 format (C-Media does). Connect your AC3 decoder to the SP/DIF output, and use the -ac hwac3 option. It is experimental but known to work with C-Media cards, Soundblaster Live! using ALSA (but not OSS) drivers and DXR3/Hollywood+ MPEG decoder cards.

a jeste http://www.mplayerhq.hu/DOCS/sound.html

nic lepsiho ti zatim neporadim, protoze mam jenom dva repraky

[Lipo]

a jak ti hrajou mp3 mam taky 5.1 a hrajou mi jen 2 repra existujou ovladace na nforce i pod linux ??reba to bude tam

[CompCrasher]

mp3 hrajou taky 2.0... normalne ti ve widlich sice hrajou stereo, ale prida se do toho i subwoofer a ten k tomu pridava i basy.... neco takovyho sem nasel i u toho clanku nahore.. http://www.mplayerhq.hu/DOCS/sound.html
, ale je to haluzovy to zprovoznit ... thx


PS: zkousel sem to zapnout s podporou 6 repraku...

gmlayer -channels 6

pustim nejaky ac3 film a stejne vali jen 2 repraky... i kdyz mplayer pise, ze ven jde 6 kanalu....

[wong]

hmmm a mas alsu nebo oss? a co mas za zvukarnu?

[CompCrasher]

kdyz pustim film.....dole je videt problem s alsou, co s tim mam cerstve zkompilovanou 0.9.6-stable.....v metode vystupu IO zvuku mam nastaveno ALSA.....thx---via82xx --integrovana zvukna na KT3 Ultra2

z jadra sem odebral uplne OSS a ALSA....pak kompiloval alsu..jede mi v poho....pri bootu se taky nacte...proste je ok, ale tohle(chci se toho OSS zbavit uplne).. porad

Playing /mnt/cdrom/WindTalkers0.avi
Cache fill: 0,00% (0 bytes) AVI file format detected.
VIDEO: [DX50] 680x280 24bpp 25,00 fps 1059,8 kbps (129,4 kbyte/s)
SUB: Detected sub file: /mnt/cdrom/WindTalkers0.srt
SUB: Detected subtitle file format: subviewer
SUB: Read 509 subtitles.
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 320,0 kbit/s
AUDIO: 48000 Hz, 6 ch, 16 bit (0x10), ratio: 40000->576000 (320,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
================================================== ========================
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
================================================== ========================
Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 6 channels, Signed 16-bit (Little-Endian)
alsa-init: soundcard set to ?Ó˙ż»
ALSA lib pcm.c:1908snd_pcm_open_noupdate) Unknown PCM ?Ó˙żřŇ˙ż*
alsa-init: playback open error: No such file or directory
Could not open/initialize audio device -> no sound.
Audio: no sound
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 680 x 280 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,43:1 - prescaling to correct movie aspect.
VO: [xv] 680x280 => 680x280 Planar YV12
Disabling DPMS
V:3052,9 76323 9% 1% 0,0% 0 0 56%
Successfully enabled DPMS

[wong]

tak sem vyzkousel co to dela u me, mam sice jenom dva repraky, takze nevim co hraje na tech ostatnich, ale kdyz dam -channels 4 nebo -channels 6 tak se to spusti spravne a je videt, ze by to melo hrat

rekl bych, ze bude problem s tou alsou.. jeste jednou co mas za zvukovku?

ja mam distribucni alsu z MDK9.1 a SB Live! 1024

a zkus to spustit jeste s parametrem -v 3 (vic informaci)

Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
ao2: 48000 Hz  6 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 6 channels (requested: 6)
audio_setup: using 48000 Hz samplerate (requested: 48000)
audio_setup: frags:  12/12  (16380 bytes/frag)  free: 196560
AO: [oss] 48000Hz 6ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
Starting playback...

[CompCrasher]

ukusim, mimochodem, tohle sem ted zkousel a je to stejny nastaveni, jen bez parametru -channels 6

mam via8235, nebo alc650, takhle to nazyvaj.......ac97 jeste mozna

Playing /mnt/cdrom/WindTalkers0.avi
Cache fill: 0,00% (0 bytes) AVI file format detected.
VIDEO: [DX50] 680x280 24bpp 25,00 fps 1059,8 kbps (129,4 kbyte/s)
SUB: Detected sub file: /mnt/cdrom/WindTalkers0.srt
SUB: Detected subtitle file format: subviewer
SUB: Read 509 subtitles.
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 320,0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 40000->192000 (320,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
================================================== ========================
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
================================================== ========================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 2 channels, Signed 16-bit (Little-Endian)
alsa-init: 1 soundcard found, using: hw:0,0
alsa9: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa9] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
This file was encoded with DivX501 Build481
VDec: vo config request - 680 x 280 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,43:1 - prescaling to correct movie aspect.
VO: [xv] 680x280 => 680x280 Planar YV12 [fs]
frame skip 8 0,0 A-V: 0,017 ct: 0,000 1/ 1 0% 0% 0,0% 0 0 62%
cmd: 5008V: 3,0 A-V: 0,001 ct: 0,002 76/ 76 6% 4% 0,9% 0 0 94%
alsa-uninit: pcm closed-0,001 ct: 0,003 107/107 6% 4% 0,9% 0 0 93%

[CompCrasher]

[root@david root]# gmplayer -channels 6 -v
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/share/locale


MPlayer 0.90rc4-3.2.1 (C) 2000-2003 Arpad Gereoffy (see DOCS)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with Runtime CPU Detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 50 audio & 135 video codecs
CommandLine: '-channels' '6' '-v'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf : No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed : 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such file or directory
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
get_path('Skin') -> '/root/.mplayer/Skin'
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/share/mplayer/Skin'
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x23, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x24, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x25, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x26, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x27, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x28, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x29, depth 24, R:FF0000 G:FF00 B:FF
vo: X11 truecolor visual 0x2a, depth 24, R:FF0000 G:FF00 B:FF
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 1 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
cmd: 20
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.

Playing /mnt/cdrom/WindTalkers0.avi
Not an URL!
File size is 728657920 bytes
CACHE_PRE_INIT: 0 [0] 0 pre:0 eof:0
Cache fill: 0,00% (0 bytes) AVI file format detected.
list_end=0x2286
======= AVI Header =======
us/frame: 40000 (fps=25,000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 104886 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 680 x 280
list_end=0x10F4
==> Found video stream: 0
======= STREAM Header =======
Type: vids FCC: divx (78766964)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 25/1 = 25,000
Start: 0 Len: 104886
Suggested BufferSize: 66865
Quality -1
Sample size: 0
found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 680
biHeight 280
biPlanes 1
biBitCount 24
biCompression 808802372='DX50'
biSizeImage 571200
===========================
Regenerating keyframe table for DIVX 4 video
list_end=0x217A
==> Found audio stream: 1
======= STREAM Header =======
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 40000/16 = 2500,000
Start: 0 Len: 10488600
Suggested BufferSize: 20480
Quality -1
Sample size: 16
found 'wf', 18 bytes of 18
======= WAVE Format =======
Format Tag: 8192 (0x2000)
Channels: 5
Samplerate: 48000
avg byte/sec: 40000
Block align: 16
bits/sample: 0
cbSize: 18
Unknown extra header dump: [0] [0] [0] [0] [0] [0] [0] [0] [0] [0] [f0] [fe] [46] [8] [28] [0] [0] [0]
list_end=0x2286
Broken chunk? chunksize=1394 (id=JUNK)
list_end=0x2B3B36DA
Found movie at 0x280C - 0x2B3B36DA
Reading INDEX block, 209760 chunks for 104886 frames (fpos=0x2b3b36e2)
AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x500C)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video size=555768160 (104886) audio size=167817600 (10488600)
VIDEO: [DX50] 680x280 24bpp 25,00 fps 1059,8 kbps (129,4 kbyte/s)
[V] filefmt:3 fourcc:0x30355844 size:680x280 fps:25,00 ftime:=0,0400
get_path('sub/') -> '/root/.mplayer/sub/'
SUB: Detected sub file: /mnt/cdrom/WindTalkers0.srt
SUB: Detected subtitle file format: subviewer
SUB: Read 509 subtitles.
================================================== ========================
Opening audio decoder: [liba52] AC3 decoding with liba52
dec_audio: Allocating 3840 bytes for input buffer
dec_audio: Allocating 18432 + 65536 = 83968 bytes for output buffer
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 320,0 kbit/s
A52 flags before a52_frame: 0x37
A52 flags after a52_frame: 0x17
Using MMX optimized resampler
AUDIO: 48000 Hz, 6 ch, 16 bit (0x10), ratio: 40000->576000 (320,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
================================================== ========================
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
================================================== ========================
Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 6 channels, Signed 16-bit (Little-Endian)
alsa-init: compiled for ALSA-0.9.0rc6
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: hw:0,0
alsa-init: pcm opend in block-mode
alsa-init: unable to set channels: Invalid argument
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
Could not open/initialize audio device -> no sound.
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: liba52
Audio: no sound
Freeing 0 unused audio chunks
Starting playback...
This file was encoded with DivX501 Build481
[ffmpeg] aspect_ratio: 2,428571
VDec: vo config request - 680 x 280 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,43:1 - prescaling to correct movie aspect.
VO Config (680x280->680x280,flags=0,'MPlayer',0x32315659)
VO: [xv] 680x280 => 680x280 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel@goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 69 for hw scaling
[xv] dx: 0 dy: 0 dw: 680 dh: 280
*** [vo] Allocating mp_image_t, 688x288x12bpp YUV planar, 297216 bytes
[xv] dx: 0 dy: 0 dw: 680 dh: 280

[CompCrasher]

to dole: to byla alsa puvodni..... jak se toho mam zbavit i kdyz mi ta nova verze funguje a modul je zaveden? --jak odstranit starou alsu, ktera je uz v jadre po instalaci??


[root@david root]# gmplayer -channels 6 -v

Opening audio decoder: [liba52] AC3 decoding with liba52
dec_audio: Allocating 3840 bytes for input buffer
dec_audio: Allocating 18432 + 65536 = 83968 bytes for output buffer
Using SSE optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 320,0 kbit/s
A52 flags before a52_frame: 0x37
A52 flags after a52_frame: 0x17
Using MMX optimized resampler
AUDIO: 48000 Hz, 6 ch, 16 bit (0x10), ratio: 40000->576000 (320,0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
================================================== ========================
================================================== ========================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
================================================== ========================
Checking audio filter chain for 48000Hz/6ch/16bit -> 48000Hz/6ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=48000Hz, nch = 6, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 6 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 6ch Signed 16-bit (Little-Endian)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 6 channels, Signed 16-bit (Little-Endian)
alsa-init: compiled for ALSA-0.9.0rc6
alsa-init: got device=0, subdevice=0
alsa-init: 1 soundcard found, using: hw:0,0
alsa-init: pcm opend in block-mode
alsa-init: unable to set channels: Invalid argument
[x11] NET style stay on top ( layer 0 ). Using state _NET_WM_STATE_STAYS_ON_TOP.
Could not open/initialize audio device -> no sound.
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: liba52
Audio: no sound
Freeing 0 unused audio chunks
Starting playback...
This file was encoded with DivX501 Build481
[ffmpeg] aspect_ratio: 2,428571
VDec: vo config request - 680 x 280 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2,43:1 - prescaling to correct movie aspect.
VO Config (680x280->680x280,flags=0,'MPlayer',0x32315659)
VO: [xv] 680x280 => 680x280 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel@goldbach.in-berlin.de> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 69 for hw scaling
[xv] dx: 0 dy: 0 dw: 680 dh: 280
*** [vo] Allocating mp_image_t, 688x288x12bpp YUV planar, 297216 bytes
[xv] dx: 0 dy: 0 dw: 680 dh: 280

[wong]

zkusil bych prekompilovat mplayer s tou novou alsou

a kdyz uz v tom budes, tak si stahni novou verzi mplayeru - uz vysla 0.91

[Gargamel]

Integrovana zvukovka spousta problemu.
Kolik to ma dir zezadu jako vystupy? Mam totiz podezreni, ze se musi este neco nastavit, aby to bralo doopravdy tech 6 repraku, ted si myslim ze jsou jenom 2, mikrak a line in.
Kazdopadne znovu zkompiluj ten mplayer, je mozny ze se od te doby 0.90 do 0.9.6 neco v ALSE zmenilo...

[CompCrasher]

Zkusim to zkompilovat..... zezadu sou tri, out, in, mic..... pak si v alsamixeru nastavis, jestli chces "linein as center+lfe" a tak.....kdyz dam "duplicate front" tak se zvuk prevede ze prednich i do zadnich...takze je videt, ze to funguje..............